Hanns G Hs233h3b Users Manual

                                                                    User’s Manual  
11 
ADJUSTING THE VIEWING ANGLE 
 
  For optimal viewing it is recommended to look at the full face of the monitor, then adjust the 
monitor’s angle to your own preference. 
  Hold the stand so you do not topple the mon itor when you change the monitor’s angle. 
  You are able to adjust the monitor’s angle from -5  to 15. 
 
 
 
 
Figure.3.  Monitor Angle
 
 
NOTES:
 
 
  Do not touch the LCD screen when you change...

User’s Manual 
 
12 
OPERATING INSTRUCTIONS 
 
GENERAL INSTRUCTIONS   
   
Press the power button to turn the monitor on or off. The other control buttons are located on the 
front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to 
your personal preferences. 
  The power cord should be connected. 
  Connect the Signal cable from  the monitor to the VGA card. 
  Press the power button to turn on the m onitor. The power indicator will light up. 
 
 
 
Menu /...

                                                                    User’s Manual  
13 
FRONT PANEL CONTROL 
 
 Power Button: 
Press this button to switch  ON/OFF of monitor’s power.   
 
 Power Indicator:  Blue  — Power On mode.  
Orange — Power Saving mode. 
 
 MENU:  
1. Turn the OSD menu on.   
2. Enter sub menu when OSD menu is ON.   
 
 Adjust  ▲▼:  
1. Invalid when the OSD menu is off.   
2. Navigate through adjustment icons when OSD is ON or adjust a function when function is  activated....

User’s Manual 
 
14 
HOW TO ADJUST A SETTINGS 
 
PICTURE  
BRIGHTNESS 
Adjust the brightness value of the display according to your 
preference. Select「BRIGHTNESS」option to adjust the 
brightness value. 
CONTRAST 
Adjust the contrast value of the display according to your 
preference. Select 「CONTRAST」option to adjust the contrast 
value. 
H-POSITION 
Select the  「H-POSITION 」  option to shift the screen image to 
the left or right. Enter the  option and adjust the level.  [For VGA 
only] 
V-POSITION...

                                                                    User’s Manual  
15 
DCR Select the「DCR」option to switch the function On or Off 
ECO  Select the 「ECO 」option to switch the function On or Off. 
SHARPNESS Select the 「SHARPNESS 」option to adjust the sharpness of the 
display. Set the value from 0 to 100. 
OD   Select the「OD」option to switch the function On or Off. 
OTHER SETTINGS 
LANGUAGE 
Select  「LANGUAGE 」  option to change the language of the 
OSD. Enter the option and select a...

User’s Manual 
 
16 
PLUG AND  PLAY   
 
Plug & Play DDC2B Feature 
 
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. 
It allows the monitor to inform the host system  of its identity and, depending on the level of DDC 
used, communicate additional information about its display capabilities. The DDC2B is a 
bidirectional data channel based on the I²C protoc ol. The host can request EDID information over the 
DDC2B channel. 
 
THIS MONITOR WILL APPEAR TO BE NON-...

                                                                    User’s Manual  
17 
TECHNICAL SUPPORT (FAQ) 
Q & A FOR GENERAL PROBLEMS 
PROBLEM & QUESTION POSSIBLE SOLUTION 
Power LED is not on *Check if the Power Switch is in the ON position. 
*Power Cord should be connected. 
No Plug & Play 
*Check if the PC system is Plug & Play compatible. 
*Check if the Video Card is Plug & Play compatible. 
*Check if any plug pins on the VGA , DVI or HDMI 
connector are bent. 
The display is too dark or too...

User’s Manual 
 
18 
Addendum related to Windows 7 
When you encounter display problem under Windows 7, you need to do the following: 
 
1. Make sure your PC computer (Hardw are requirement) can support Windows 7. 
2. Make sure your video ca rd can run Windows 7. 
3. If your video card can support Windows 7, need to in stall the latest Win 7 driver of your video 
card. 
 
Suggest to do the following: 
1. Install the latest Windows 7 vide o driver of your video card. 
2. Try to use the recommended display...

                                                                    User’s Manual  
19 
ERROR MESSAGE & POSSIBLE SOLUTIONS 
 
  CABLE NOT CONNECTED: 
1. Check that the signal-cable is properly connect ed, If the connector is loose, tighten the 
connector’s screws. 
2.  Check the signal-cable’s connection pins for damage. 
 
   INPUT NOT SUPPORT : 
Your computer has been set to unsuitable display mode, set the computer to display mode given 
in the following table.   
 
FACTORY PRESET TIMING TABLE:...

User’s Manual 
 
20 
(HDMI INPUTS) 
 
Primary Video Format Timings  
 
MODE RESOLUTION 
1 640× 480p @ 60Hz 
2 720×480p @ 60Hz   
3 1280×720p @ 60Hz 
4 720×576p @ 50Hz   
5 1280×720p @ 50Hz   
6 1920×1080i @ 60Hz 
7 1920×1080i @ 50Hz   
 
Secondary Video Format Timings   
 
MODE RESOLUTION 
1 1920x1080p @ 25Hz 
2 1920x1080p @ 30Hz   
3 1920x1080p @ 50Hz 
4 1920x1080p @ 60Hz 
** We ensure that the monitor can be lighted under interlace signal mode, but we can not guarantee 
the image quality.