Hanns G Hs233h3b Users Manual

							 
 
 
HS233 
HSG 1155
 
						

							User’s Manual                                                                OSD[4.393] 
 
2 
Before operating the monitor, please read this ma nual thoroughly. This manual should be retained for 
future reference. 
  
 
 
 
This device complies with requirement of EMC directive 2004/108/EC with regard to 
Electromagnetic Compatibility, and 73/23/EEC and 93/ 68/EEC with regard to Low Voltage directive. 
 
 
Socket-outlet shall be near the eq uipment and shall be accessible. 
 
 
Trademark Notice: 
                    Hanns.G products incorporate High -Definition Multimedia Interface   
(HDMI 
TM) technology. 
HDMI, the HDMI Logo, and High-Definition Multimedia  Interface are trademarks or registered 
trademarks of HDMI Licensing LLC in the  United States and other countries.,  
 
						

							                                                                    User’s Manual  
3 
RECYCLING INFORMATION 
 
We, the  Hanns.G care very much about our environment prot ection strategy and firmly believe that 
it helps us have healthier earth via appropriate treatment and  recycling of industrial technology 
devices at the end-of-life. 
These devices contain recyclable materials, whic h can be re-decomposed and re-integrated into 
brand-new marvels. On the contra ry, other material can be classified to hazardous and poisoned 
substances. We strongly encourage  you to contact the provided information to recycle this product. 
  For more information, please visit www.hannsg.com 
 
 
						

							User’s Manual 
 
4 
TABLE OF CONTENTS 
 
SAFETY NOTICE ........................................................................\
..........................5 
PRECAUTIONS........................................................................\
.........................5 
SPECIAL NOTES ON LCD MONITORS ...................................................... 6 
BEFORE YOU OPERATE THE MONITOR ...................................................... 7 
FEATURES........................................................................\
.................................7 
CHECKING THE CONTENTS OF THE PACKAGE .................................. 7 
INSTALLATION INSTRUCTIONS ................................................................ 8 
POWER........................................................................\
....................................... 8 
SETTING THE MONITOR ON THE WALL ................................................9 
MAKING CONNECTIONS........................................................................\
.... 10 
ADJUSTING THE VIEWING ANGLE.......................................................... 11 
OPERATING INSTRUCTIONS ........................................................................\
. 12
 
GENERAL INSTRUCTIONS........................................................................\
. 12 
FRONT PANEL CONTROL ........................................................................\
.. 13 
HOW TO ADJUST A SETTINGS ..................................................................14 
PLUG AND  PLAY ........................................................................\
....................16 
TECHNICAL SUPPORT (FAQ) ........................................................................\
. 17 
Q & A FOR GENERAL PROBLEMS ........................................................... 17 
ERROR MESSAGE & POSSIBLE SOLUTIONS ....................................... 19 
APPENDIX ........................................................................\
.................................... 21 
SPECIFICATIONS ........................................................................\
..................21 
 
 
						

							                                                                    User’s Manual  
5 
SAFETY NOTICE 
 
1. The changes or modifications  not expressly approved by the pa rty responsible for compliance 
could void the users authority  to operate the equipment. 
2.  Shielded interface cables and AC pow er cord, if any, must be used in order to comply with the 
emission limits. 
3.  The manufacturer is not respons ible for any radio or TV interference caused by unauthorized 
modification to this equipment. It is the responsibilities of the user to co rrect such interference. 
4.  Only use attachments/accesories specified by the manufacturer. 
 
WARNING: 
To prevent fire or shock hazard, do not expose the  monitor to rain or moisture. Dangerously high 
voltages are present inside the monitor. Do not open the cabinet. Refer  servicing to qualified 
personnel only.  
 
PRECAUTIONS 
  Do not use the monitor near water, e.g. near  a bathtub, washbowl, kitchen sink, laundry tub, 
swimming pool or in a wet basement. 
  Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a  person and cause serious damage to the applianc e. Use only a cart or stand recommended by the 
manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a 
mounting kit approved by the manufacturer and follow the kit instructions. 
  Slots and openings in the back and bottom of th e cabinet are provided for ventilation. To ensure 
reliable operation of the monitor  and to protect it from overheating, be sure these openings are not 
blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place 
the monitor near or over a radiator or heat re gister. Do not place the monitor in a bookcase or 
cabinet unless proper ventilation is provided. 
  The monitor should be operated only from the t ype of power source indicated on the label. If you 
are not sure of the type of power supplied to  your home, consult your dealer or local power 
company. 
  Unplug the unit during a lighting storm or when it  will not be used for long period of time. This 
will protect the monitor from damage due to power surges. 
  Do not overload power strips and extension cords.  Overloading can result in fire or electric shock. 
  Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a 
fire or electric shock. Never  spill liquids on the monitor. 
  Do not attempt to service the monitor by yourse lf; opening or removing covers can expose you to 
dangerous voltages and other haza rds. Please refer all servicing to qualified service personnel. 
    The wall socket shall be in stalled near the equipment and shall be easily accessible. 
 
 
						

							User’s Manual 
 
6 
SPECIAL NOTES ON LCD MONITORS 
 
The following symptoms are normal with LCD monitor and do not indicate a problem. 
 
  Due to the nature of the fluorescent light, the sc reen may flicker during initial use. Turn off the 
Power Switch and then turn it on again to make sure the flicker disappears. 
  You may find slightly uneven brightness on the  screen depending on the desktop pattern you use. 
  The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or 
less such as a missing pixel or  a pixel lit all of the time. 
  Due to the nature of the LCD screen, an afteri mage of the previous screen may remain after 
switching the image, when the same image is disp layed for hours. In this case, the screen is 
recovered slowly by changing the image or  turning off the Power Switch for hours. 
  If the screen suddenly flashes erratically or the backlighting fa ils, please contact your dealer or 
service center for repair. Do not atte mpt to repair the monitor yourself. 
 
Lamp Disposal 
 
  LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR 
DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE 
INFORMATION, CONTACT THE ELECTR
ONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG
. 
FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG
. 
 
 
						

							                                                                    User’s Manual  
7 
BEFORE YOU OPERATE THE MONITOR 
 
FEATURES 
 
  58,4cm / 23” Wide Screen TFT Color LCD Monitor 
  Crisp, Clear Display for Windows 
  GP Green Product 
 Ergonomic Design 
  Space Saving, Compact Case Design 
 
CHECKING THE CONTENTS OF THE PACKAGE 
   
The product package should include the following items: 
LCD Monitor 
   
     
 
Cables and User manual 
 
 
Power Cord  Warranty Card  Quick Start Guide User’s Manual  VGA Cable 
 
Audio Cable 
(optional)  DVI Cable (Dual link)  HDMI to DVI Cable 
(optional)  HDMI Cable   
(optional) 
 
						

							User’s Manual 
 
8 
INSTALLATION INSTRUCTIONS 
 INSTALL                                 REMOVE 
 
     
    
Figure.1. Installing and Removing the Base 
 
INSTALLATION: 
 
1.  Carefully place the monitor face down on a soft and  flat surface (blanket, foam, cloth, etc) to 
prevent any damage to the monitor.   
2.  Align the base with the opening of the stand. 
3.  Snap the base into stand. A clear click sound will  affirm that the base is connected correctly. 
4.  Verify that the base is securely attached to the  stand by looking at the release button of the base is 
fully engaged in the slot of the stand.   
 
REMOVAL: 
 
1.  Carefully place the monitor face down on a soft and  flat surface (blanket, foam, cloth, etc) to 
prevent any damage to the monitor. 
2.  Press the release button as indicated.   
3.  Follow the arrow direction to remove the base.   
 
POWER 
 
POWER SOURCE: 
 
1.  Make sure that the power cord is the correct type required in your area. 
2.  This LCD monitor has an Internal  universal power supply that allows operation in either     
100/120V AC or 220/240V AC voltage area  (No user adjustment is required.) 
3.  Connect the AC-power cord one end to your LC D monitor’s AC-input socket, the other end to 
wall-outlet.  
 
 
 
 
 
 
 
 
 
 
 
						

							                                                                    User’s Manual  
9 
SETTING THE MONITOR ON THE WALL 
DISSEMBLING THE STAND BASE: 
 
1. Disconnect all the cables and cords from  the Monitor to prevent damage.   
2.  Carefully place the monitor face down on a soft and  flat surface (blanket, foam, cloth, etc) to 
prevent any damage to the monitor. 
3.  Press the release button as indicated, follow  the arrow direction to remove the base.   
4.  Remove the three (3) screws so th at the stand cover can be removed. 
5.  Remove the three (3) screws so that  the hinge assembly can be removed. 
 
 
 
(For reference only) 
 
WALL MOUNTING THE MONITOR: 
 
1.  Purchase a VESA compatible wall bracket: 
VESA 100x100, 4 holes, M4, 10 mm, 8 kg. 
2.  Locate your ideal Monitor position on the wall. 
3.  Fix the wall bracket firmly on the wall. 
4.  Secure the Monitor to the bracket using the 4 mount holes 
on the back and center of the Monitor. 
 
Note:  
  Please read the instructions of your specific wa ll bracket to properly wall mount the Monitor. 
 The pitch of the mounting holes is 100  mm horizontally and 100 mm vertically. 
 The screws type required is metric: M4, 10 mm length. 
 The Monitor stand base can be screwed on a table  or a hard surface using the hole on the back of 
the stand base. 
 
*Installing the LCD Monitor requir es special skill that should only be performed by qualified service 
personnel. Customers should not attempt to do the work themselves . Hanns.G bears no responsibility 
for improper mounting or mounting t hat results in accident or injury. You can ask qualified service 
personnel about using an optional bracket to mount the Monitor to the wall.  
 
						

							
User’s Manual 
 
10 
MAKING CONNECTIONS 
 
CONNECTING TO A PC 
 
Turn off your computer before performing the procedure below.   
 
1.  Connect one end of the VGA cable to the back of  the monitor and connect the other end to the 
computer’s VGA port. 
2.  Connect one end of the DVI cable to the back of  the monitor and connect the other end to the 
computer’s DVI port. 
3.  You must use the enclosed dual-link DVI  cable for 120 Hz and 3D functionality. 
4.  Connect one end of the HDMI to DVI cable (optiona l) to the back of the monitor and connect the 
other end to the computer’s DVI port. 
5.  Connect one end of the HDMI cable  (optional) to the back of the monitor and connect the other 
end to the computer’s HDMI port. 
6.  Connect the audio cable (optional) between the  monitor’s HDMI Line Out and the external audio 
amplifier unit.   
7.  Plug one end of the AC power cord to the LCD m onitor’s AC input socket, and the other end to 
Wall outlet. 
8.  Turn on your monitor and computer. 
 
Figure.2. Connecting to a PC 
1 VGA Input 2 DVI Input   
3 HDMI Input 4 HDMI Line Out     
5 Power AC  Input