Hanns G Hs233h3b Users Manual

 
 
 
HS233 
HSG 1155
 

User’s Manual                                                                OSD[4.393] 
 
2 
Before operating the monitor, please read this ma nual thoroughly. This manual should be retained for 
future reference. 
  
 
 
 
This device complies with requirement of EMC directive 2004/108/EC with regard to 
Electromagnetic Compatibility, and 73/23/EEC and 93/ 68/EEC with regard to Low Voltage directive. 
 
 
Socket-outlet shall be near the eq uipment and shall be accessible. 
 
 
Trademark Notice:...

                                                                    User’s Manual  
3 
RECYCLING INFORMATION 
 
We, the  Hanns.G care very much about our environment prot ection strategy and firmly believe that 
it helps us have healthier earth via appropriate treatment and  recycling of industrial technology 
devices at the end-of-life. 
These devices contain recyclable materials, whic h can be re-decomposed and re-integrated into 
brand-new marvels. On the contra ry, other material can be classified to...

User’s Manual 
 
4 
TABLE OF CONTENTS 
 
SAFETY NOTICE ........................................................................\
..........................5 
PRECAUTIONS........................................................................\
.........................5 
SPECIAL NOTES ON LCD MONITORS ...................................................... 6 
BEFORE YOU OPERATE THE MONITOR ...................................................... 7...

                                                                    User’s Manual  
5 
SAFETY NOTICE 
 
1. The changes or modifications  not expressly approved by the pa rty responsible for compliance 
could void the users authority  to operate the equipment. 
2.  Shielded interface cables and AC pow er cord, if any, must be used in order to comply with the 
emission limits. 
3.  The manufacturer is not respons ible for any radio or TV interference caused by unauthorized 
modification to this equipment....

User’s Manual 
 
6 
SPECIAL NOTES ON LCD MONITORS 
 
The following symptoms are normal with LCD monitor and do not indicate a problem. 
 
  Due to the nature of the fluorescent light, the sc reen may flicker during initial use. Turn off the 
Power Switch and then turn it on again to make sure the flicker disappears. 
  You may find slightly uneven brightness on the  screen depending on the desktop pattern you use. 
  The LCD screen has effective pixels of 99.99% or more. It may include blemishes of...

                                                                    User’s Manual  
7 
BEFORE YOU OPERATE THE MONITOR 
 
FEATURES 
 
  58,4cm / 23” Wide Screen TFT Color LCD Monitor 
  Crisp, Clear Display for Windows 
  GP Green Product 
 Ergonomic Design 
  Space Saving, Compact Case Design 
 
CHECKING THE CONTENTS OF THE PACKAGE 
   
The product package should include the following items: 
LCD Monitor 
   
     
 
Cables and User manual 
 
 
Power Cord  Warranty Card  Quick Start Guide User’s...

User’s Manual 
 
8 
INSTALLATION INSTRUCTIONS 
 INSTALL                                 REMOVE 
 
     
    
Figure.1. Installing and Removing the Base 
 
INSTALLATION: 
 
1.  Carefully place the monitor face down on a soft and  flat surface (blanket, foam, cloth, etc) to 
prevent any damage to the monitor.   
2.  Align the base with the opening of the stand. 
3.  Snap the base into stand. A clear click sound will  affirm that the base is connected correctly. 
4.  Verify that the base is securely...

                                                                    User’s Manual  
9 
SETTING THE MONITOR ON THE WALL 
DISSEMBLING THE STAND BASE: 
 
1. Disconnect all the cables and cords from  the Monitor to prevent damage.   
2.  Carefully place the monitor face down on a soft and  flat surface (blanket, foam, cloth, etc) to 
prevent any damage to the monitor. 
3.  Press the release button as indicated, follow  the arrow direction to remove the base.   
4.  Remove the three (3) screws so th at the...

User’s Manual 
 
10 
MAKING CONNECTIONS 
 
CONNECTING TO A PC 
 
Turn off your computer before performing the procedure below.   
 
1.  Connect one end of the VGA cable to the back of  the monitor and connect the other end to the 
computer’s VGA port. 
2.  Connect one end of the DVI cable to the back of  the monitor and connect the other end to the 
computer’s DVI port. 
3.  You must use the enclosed dual-link DVI  cable for 120 Hz and 3D functionality. 
4.  Connect one end of the HDMI to DVI cable...