Gigabyte Ga8knxp Manual

- 47 -BIOS SetupEnglishOnboard Serial Port 2AutoBIOS will automatically setup the port 2 address.3F8/IRQ4Enable onboard Serial port 2 and address is 3F8.2F8/IRQ3Enable onboard Serial port 2 and address is 2F8. (Default value)3E8/IRQ4Enable onboard Serial port 2 and address is 3E8.2E8/IRQ3Enable onboard Serial port 2 and address is 2E8.DisabledDisable onboard Serial port 2.UART Mode Select
This item allows you to determine which Infra Red(IR) function of Onboard I/O chip.ASKIRSet onboard I/O chip UART to...

- 48 - GA-8KNXP Ultra-64 MotherboardEnglishGame Port Address201Set Game Port Address to 201. (Default value)209Set Game Port Address to 209.DisabledDisable this function.Midi Port Address300Set Midi Port Address to 300.330Set Midi Port Address to 330.DisabledDisable this function. (Default value)Midi Port IRQ5Set Midi Port IRQ to 5.10Set Midi Port IRQ to 10. (Default value)CIR Port Address310Set CIR Port Address to 310.320Set CIR Port Address to 320.DisabledDisable this function. (Default value)CIR Port...

- 49 -BIOS SetupEnglishPower Management SetupCMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Power Management SetupACPI Suspend Type[S1(POS)]
Power LED in S1 state[Blinking]
Off by Power button[Instant-off]
PME Event Wake Up[Enabled]
ModemRingOn/WakeOnLan[Enabled]
Resume by Alarm[Disabled]
xDate (of Month) AlarmEveryday
xTime (hh:mm:ss) Alarm0 : 0 : 0
Power On by Mouse[Disabled]
Power On by Keyboard[Disabled]
xKB Power ON PasswordEnter
AC Back Function[Soft-Off]higf: MoveEnter: Select+/-/PU/PD:...

- 50 - GA-8KNXP Ultra-64 MotherboardEnglishResume by Alarm
You can set Resume by Alarm item to enabled and key in Data/time to power on system.DisabledDisable this function. (Default value)EnabledEnable alarm function to POWER ON system.
If RTC Alarm Lead To Power On is Enabled.
Date (of Month) Alarm : Everyday, 1~31
Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)Power On By MouseDisabledDisabled this function. (Default value)Mouse ClickDouble click on PS/2 mouse left button to power on the...

- 51 -BIOS SetupEnglishPnP/PCI ConfigurationsPCI 1 IRQ AssignmentAutoAuto assign IRQ to PCI 1. (Default value)3,4,5,7,9,10,11,12,14,15Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 1.PCI 2 IRQ AssignmentAutoAuto assign IRQ to PCI 2. (Default value)3,4,5,7,9,10,11,12,14,15Set IRQ 3,4,5,7,9,10,11,12,14,15 to  PCI 2.PCI 3 IRQ AssignmentAutoAuto assign IRQ to PCI 3. (Default value)3,4,5,7,9,10,11,12,14,15Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 3.CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
PnP/PCI...

- 52 - GA-8KNXP Ultra-64 MotherboardEnglishReset Case Open StatusCase Opened
If the case is closed, Case Opened will show No.
If the case have been opened, Case Opened will show Yes.
If you want to reset Case Opened value, set Reset Case Open Status toEnabled and save
CMOS, your computer will restart.Current Voltage (V) Vcore / DDR25V / +3.3V / +5V / +12VDetect systems voltage status automatically.Current CPU TemperatureDetect CPU Temp. automatically. .Current CPU/POWER/SYSTEM FAN Speed (RPM)Detect...

- 53 -BIOS SetupEnglishCPU FAN Fail WarningDisabledFan Warning Function Disable. (Default value)EnabledFan Warning Function Enable.POWER FAN Fail WarningDisabledFan Warning Function Disable. (Default value)EnabledFan Warning Function Enable.SYSTEM FAN Fail WarningDisabledFan Warning Function Disable. (Default value)EnabledFan Warning Function Enable.CPU Smart FAN ControlDisabledDisable this function.EnabledEnable CPU Smart Fan control function.(Default value)
a.When the CPU temperature is higher than 60...

- 54 - GA-8KNXP Ultra-64 MotherboardEnglishFrequency/Voltage ControlCPU Clock Ratio
This option will not be shown or not be available if you are using a CPU with the locked ratio.15X~21XIt depends on CPU Clock Ratio.
This setup option will automatically assign by CPU detection.
For C-Stepping P4: 8X,10X~24X default: 15X
For Northwood CPU: 12X~24X default: 16X
The option will display Locked and read only if the CPU ratio is not changeable.CPU Host Clock Control
Note: If system hangs up before enter CMOS...

- 55 -BIOS SetupEnglishAGP/PCI/SRC Fixed
Serial ATA device is very sensitive to SRC clock. SRC over clock may make Serial ATA device
function cant work properly.Adjust AGP/PCI/SRC clock asychrohous with CPU.Memory Frequency For
for FSB(Front Side Bus) frequency=400MHz,2.66Memory Frequency = Host clock X 2.66.AutoSet Memory frequency by DRAM SPD data. (Default value)
 for FSB(Front Side Bus) frequency=533MHz,2.0Memory Frequency = Host clock X 2.0.2.5Memory Frequency = Host clock X 2.5.AutoSet Memory...

- 56 - GA-8KNXP Ultra-64 MotherboardEnglishCPU OverVoltage ControlSupports adjustable CPU Vcore from 0.8375V to 1.7600V.
    (Default value: Normal)Normal CPU VcoreDisplay your CPU Vcore Voltage.CMOS Setup Utility-Copyright (C) 1984-2004 Award Software}Standard CMOS Features
}Advanced BIOS Features
}Integrated Peripherals
}Power Management Setup
}PnP/PCI Configurations
}PC Health Status
}Frequency/Voltage ControlESC: Quithigf: Select Item
F8: Dual BIOS/Q-FlashF10: Save & Exit SetupLoad Fail-Safe...