Gigabyte Ga8knxp Manual

Technical Reference- 87 -EnglishMethod 2:
Connect the front channels to the LINE OUT
port located on the audio panel and the rear chan-
nels to the LINE IN port. Connect the center/
subwoofer channels to the MIC IN port located
on the audio panel and the R/L channels to the
Surround-Kit SUR BACK port.  (This method
requires UAJ function)STEP 4 :
Following installation of the audio driver, you find a
icon a Sound Effect  icon on the lower right hand
taskbar.  Click the icon to select the function.STEP 5...

- 88 - GA-8KNXP Ultra-64 MotherboardEnglishSPDIF Output Device (Optional Device)A SPDIF output device is available on the
motherboard. Cable with rear bracket is provided
and could link to the SPDIF output connector (As
picture.) For the further linkage to decoder, rear
bracket provides coaxial cable and Fiber
connecting port.
1.Connect the SPDIF output device to the rear
bracket of PC, and fix it with screw.2. Connect SPDIF device to the motherboard.3. Connect SPDIF to the SPDIF decoder. 

Technical Reference- 89 -EnglishJack-Sensing and UAJ Introduction
Install Microsoft DirectX8.1 or later version  before to enable Jack-Sensing support for Windows
98/98SE/2000/ME.Introduction of audio connectors
You may connect CDROM, Walkman or others
audio input devices to Line In jack, speakers, ear-
phone or others output devices to Line Out jack,
and microphone to MIC In jack. Jack-Sensing includes 2 parts: AUTO and MANUAL. Following is an example for 2 channels (Windows
XP): Jack-Sensing provides...

- 90 - GA-8KNXP Ultra-64 MotherboardEnglishIf you set wrong with the connectors, the warning
message will come out as right picture.Manual setting:
If the device picture shows different from what you
set, please press Manual Selection to set.UAJ Introduction
UAJ (Universal Audio Jack) has a very smart feature: It will switch signal automatically when user
plugs his audio device to the wrong jack (Line-in/ Line-out). That means users do not need to worry the
audio device should be plug in Line-in or...

Technical Reference- 91 -EnglishXpress Recovery Introduction
What is Xpress Recovery (Note)
?
Xpress Recovery utility is an utility for backing up and restoring O.S. partition . If the hard drive
can not work properly, you can restore it  to the original state.1.It supports FAT16, FAT32, NTFS format .
2.It must be connected to IDE1 Master .
3.Its only allows you to install one O.S .
4.It must be used with IDE hard disk supporting HPA .
5.The first partition must be set as the boot partition. When the...

- 92 - GA-8KNXP Ultra-64 MotherboardEnglishYou can highlight the item by using the arrows keys on your keyboard and
enter key to enter the menu.If you ever entered Xpress Recovery by booting from CD-ROM, youll still be
directed to BMP mode by pressing F9 in the bootup screen. Text Mode:
BMP Mode:Xpress Recovery V1.0 (C) Copy Right 2003. GIGABYTE Technilogy CO. , Ltd.1. Execute Backup Utility
2. Execute Restore Utility
3. Remove Backup Image
4. Set Password
5. Exit and RestartXpress Recovery V1.0 (C) Copy...

Technical Reference- 93 -English1.Execute Backup Utility:
!  Press B to Backup your System or Esc to Exit
The Backup utility will scan the system automatically and back up it.
The  backed up data will be saved as an hidden image .
2.Execute Restore Utility:
!  This program will recover your system to factory default.
       Press R to recover your system.
       Press Esc to exit
Restore the backup image to the original state.
3.Remove Backup Image:
!  Are you sure to remove backup image? (Y/N)
Remove...

- 94 - GA-8KNXP Ultra-64 MotherboardEnglish 

Appendix- 95 -EnglishRevision HistoryChapter 5 Appendix
Pictures below are shown in Windows XP (CD ver. 2.5)
Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the
driver CD-title will auto start and show the installation guide. If not, please double click
the CD-ROM device icon in My computer, and execute the setup.exe.
INSTALL CHIPSET DRIVER Install DriversThis page shows the drivers that need to be installed for the system. Click each item  to install the
driver...

- 96 - GA-8KNXP Ultra-64 MotherboardEnglishItem DescriptionDriver install finished!! you have to reboot
system!!For USB2.0 driver support under Windows XP operating system, please use Windows Service
Pack. After install Windows Service Pack, it will show a question mark ? in Universal Serial Bus
controller under Device Manager. Please remove the question mark and restart the system
(System will auto-detect the right USB2.0 driver).nIntel Chipset Software Installation Utility
Tell the operating system how...