Gigabyte Ga8knxp Manual

							Technical Reference- 87 -EnglishMethod 2:
Connect the front channels to the LINE OUT
port located on the audio panel and the rear chan-
nels to the LINE IN port. Connect the center/
subwoofer channels to the MIC IN port located
on the audio panel and the R/L channels to the
Surround-Kit SUR BACK port.  (This method
requires UAJ function)STEP 4 :
Following installation of the audio driver, you find a
icon a Sound Effect  icon on the lower right hand
taskbar.  Click the icon to select the function.STEP 5 :
Click Speaker Configuration and select both the
UAJ Function and Only Surround-Kit.  Then
click on the left selection bar and select 8CH
Speaker to complete 8 channel audio configuration.Sound Effect Configuration:
At the sound effect menu, users can adjust
sound option settings as desired. 
						

							- 88 - GA-8KNXP Ultra-64 MotherboardEnglishSPDIF Output Device (Optional Device)A SPDIF output device is available on the
motherboard. Cable with rear bracket is provided
and could link to the SPDIF output connector (As
picture.) For the further linkage to decoder, rear
bracket provides coaxial cable and Fiber
connecting port.
1.Connect the SPDIF output device to the rear
bracket of PC, and fix it with screw.2. Connect SPDIF device to the motherboard.3. Connect SPDIF to the SPDIF decoder. 
						

							Technical Reference- 89 -EnglishJack-Sensing and UAJ Introduction
Install Microsoft DirectX8.1 or later version  before to enable Jack-Sensing support for Windows
98/98SE/2000/ME.Introduction of audio connectors
You may connect CDROM, Walkman or others
audio input devices to Line In jack, speakers, ear-
phone or others output devices to Line Out jack,
and microphone to MIC In jack. Jack-Sensing includes 2 parts: AUTO and MANUAL. Following is an example for 2 channels (Windows
XP): Jack-Sensing provides audio connectors error-detection function.Auto-detecting:Please connect the devices to the right jacks
as above. A window will appear as right
picture if you setup the devices properly.
Please note that 3D audio function will only
appear when 3D audio inputs. 
						

							- 90 - GA-8KNXP Ultra-64 MotherboardEnglishIf you set wrong with the connectors, the warning
message will come out as right picture.Manual setting:
If the device picture shows different from what you
set, please press Manual Selection to set.UAJ Introduction
UAJ (Universal Audio Jack) has a very smart feature: It will switch signal automatically when user
plugs his audio device to the wrong jack (Line-in/ Line-out). That means users do not need to worry the
audio device should be plug in Line-in or Line-out jack, the device will work perfectly after UAJ is
activated.
You can click UAJ Automatic button to enable
UAJ function. Enable UAJ function: 
						

							Technical Reference- 91 -EnglishXpress Recovery Introduction
What is Xpress Recovery (Note)
?
Xpress Recovery utility is an utility for backing up and restoring O.S. partition . If the hard drive
can not work properly, you can restore it  to the original state.1.It supports FAT16, FAT32, NTFS format .
2.It must be connected to IDE1 Master .
3.Its only allows you to install one O.S .
4.It must be used with IDE hard disk supporting HPA .
5.The first partition must be set as the boot partition. When the boot partition is backed up,
please do not change the its size.
6.It is not recommend to use Xpress Recovery if you had ever used Ghost to return boot
managemer to NTFS format.1. System data and hard disks reading/writing speed will affect  backing up speed.
2. We recommend that you install Xpress Recovery  immediately after installing O.S ,
     drivers  and applications.
How to use the Xpress Recovery
There are two ways to enter the Xpress Recovery utility. (see the below)
1. Text Mode: press F9 during powering on the computer.
2. BMP Mode: boot from CD-ROM
Boot from CD:.
.
Verifying DMI  Pool Data
Boot from  CD:    Please go to Advanced BIOS setting menu and set boot from CD-ROM , then save and exit the
    BIOS menu . Later,please insert MB driver CD into your drive when Boot from CD: appears at the
    bottom of  the screen , press any key to enter Xpress Recovery.      Press F9 during  powering on the computer .Award Modular BIOS v6.00PG, An Energy Star Al ly
Copyright   (C) 1984-2002, Award Software,   Inc.Intel 865PE AGPSet BIOS  for 8IPE1000MT F1
Check System Health OK
.
.
.
Press DEL to enter SETUP / Q-Flash, F9 For Xpress Recovery
08/16/2002-I845GE-6A69YG01C-00F9 For Xpress Recovery(Note)Not all motherboard have this function. 
						

							- 92 - GA-8KNXP Ultra-64 MotherboardEnglishYou can highlight the item by using the arrows keys on your keyboard and
enter key to enter the menu.If you ever entered Xpress Recovery by booting from CD-ROM, youll still be
directed to BMP mode by pressing F9 in the bootup screen. Text Mode:
BMP Mode:Xpress Recovery V1.0 (C) Copy Right 2003. GIGABYTE Technilogy CO. , Ltd.1. Execute Backup Utility
2. Execute Restore Utility
3. Remove Backup Image
4. Set Password
5. Exit and RestartXpress Recovery V1.0 (C) Copy Right 2003. GIGABYTE Technilogy CO. , Ltd.1. Execute Backup Utility
2. Execute Restore Utility
3. Remove Backup Image
4. Set Password
5. Exit and RestartBuild 2011 
						

							Technical Reference- 93 -English1.Execute Backup Utility:
!  Press B to Backup your System or Esc to Exit
The Backup utility will scan the system automatically and back up it.
The  backed up data will be saved as an hidden image .
2.Execute Restore Utility:
!  This program will recover your system to factory default.
       Press R to recover your system.
       Press Esc to exit
Restore the backup image to the original state.
3.Remove Backup Image:
!  Are you sure to remove backup image? (Y/N)
Remove the backup image.
4.Set Password:
!  Please input the password(a~z or 0~9) or press ESC to exit.
This password must 4-16 characters.
You can set a password for Xpress Recovery to protect your hard disk data.  Once this is done,
password input will be required to enter Xpress Recovery during the next system restart.  If you
wish to remove the need for password entry, please click Set Password and under
New Password/Confirm Password, make sure there is no entry and then click Enter to
remove this step.
5.Exit and Restart:
Exit and restart your computer. 
						

							- 94 - GA-8KNXP Ultra-64 MotherboardEnglish 
						

							Appendix- 95 -EnglishRevision HistoryChapter 5 Appendix
Pictures below are shown in Windows XP (CD ver. 2.5)
Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the
driver CD-title will auto start and show the installation guide. If not, please double click
the CD-ROM device icon in My computer, and execute the setup.exe.
INSTALL CHIPSET DRIVER Install DriversThis page shows the drivers that need to be installed for the system. Click each item  to install the
driver manually or switch to theto install the drivers automatically.Massage: Some device drivers will restart your
system automatically. After restarting your
system the Xpress Install will continue to
install other drivers.
The Xpress Install uses theClick and Go technology to install the drivers automatically. Just
select the drivers you want then click the GO button. Thewill execute the installation
for you by itself.We recommend that you install all components in the list.Click GO. 
						

							- 96 - GA-8KNXP Ultra-64 MotherboardEnglishItem DescriptionDriver install finished!! you have to reboot
system!!For USB2.0 driver support under Windows XP operating system, please use Windows Service
Pack. After install Windows Service Pack, it will show a question mark ? in Universal Serial Bus
controller under Device Manager. Please remove the question mark and restart the system
(System will auto-detect the right USB2.0 driver).nIntel Chipset Software Installation Utility
Tell the operating system how the chipset components will be configured.
nUSB Patch for WinXP
This patch driver can help you to resolve the USB device wake up S3 hang up issue in XP.
nIntel 82562/82562EX/82540EM LAN Driver
For Intel(R) PRO/10/100/1000/Wireless Ethernet connections.
nRealTek AC97 Codec Driver
For Intel®
 ICH/ICH2/ICH4/ICH5/ICH5R AC97 audio.
nSilicon Image(3114) RAID Driver
Serial-ATA RAID Driver from Silicon Image.
nAdaptec AIC-7902W SCSI Controller
(If you enable the HostRAID, this item will change to Adaptec SCSI HostRAID Driver)
For Adaptec AIC-7902W SCSI Controller.
nVIA USB2.0 Controller
For VIA USB2.0 Controller.
nIntel USB 2.0 Driver
It is recommended that you use the Microsoft Windows update for the most updated driver for
XP/2K.
The drivers below are not supported by Win98/ME:
1. Adaptec SCSI / Hostraid Driver
2. 6300ESB Raid Driver
3. USB 2.0 Driver