GGP Italy SPA Chain Saw 71501051_0 Operators Manual

EN 125. Operating the Engine
1. Start the engine and grasp the handle secure-
ly with both hands.
2. Pulling the throttle lever to maintain the chain
operation, push the brake lever (left-hand
guard) down toward the front using the back
of your left hand.
3. When the brake operates and the chain is
stopped, release the throttle lever.
4. Release the brake.
•STOPPING THE ENGINE
1. Release the throttle lever to allow the engine
to idle for a few minutes
2. Set the switch to the “O” (STOP) position.
(1)...

6. SawingEN 13
•Before proceeding to
your job, read the sec-
tion “For Safe Oper-
ation”. It is recommend-
ed to first practice saw-
ing easy logs. This also
helps you get accus-
tomed to your unit.
•Always follow the safety
regulations. The chain
saw must only be used
for cutting wood. It is
forbidden to cut other
types of material.
Vibrations and kickback
vary with different mate-
rials and the require-
ments of the safety reg-
ulations would not be
respected. Do not use
the chain saw as a lever
for...

EN 146. Sawing
3. Make a notch cut one-third of the way into
the tree on the felling side.
4. Make a felling cut from the opposite side of
the notch and at a level slightly higher than
the bottom of the notch.
When you fell a tree, be
sure to warn neighboring workers of the dan-
ger.
Bucking and Limbing
•Always ensure your foothold. Do not stand
on the log.
•Be alert to the rolling over of a cut log.
Especially when working on a slope, stand
on the uphill side of the log.
•Follow the instructions in “For...

7. MaintenanceEN 15
Before cleaning, the
inspecting or repairing the unit, make sure
that engine has stopped and is cool.
Disconnect the spark plug to prevent acci-
dental starting.
•MAINTENANCE AFTER EACH USE
1. Air filter
Loosen the knob and remove the air cleaner
cover. 
Take off the filter elements and tap off attached
sawdust. When they are extremely dirty, shake-
wash with gasoline. Dry them completely before
reinstalling.
2. Oiling port
Dismount the guide bar and check the oiling port
for...

EN 167. Maintenance
3. Oil filter
1. With a wire hook, take out the oil filter from
the feeding port.
2. Wash the filter with gasoline.
When returning the filter,
use a pinch not to be folded the suction pipe.
4. Spark plug
Clean the electrodes with a wire brush and reset
the gap to 0.65 mm as necessary.
5. Sprocket
Check for cracks and for excessive wear inter-
fering with the chain drive. If the wear is consid-
erable, replace it with new one. Never fit a new
chain on a worn sprocket, or a worn chain...

7. Maintenance of Saw Chain and Guide BarEN 17
1. Saw Chain
It is very important for
smooth and safe operation to always keep
the cutters sharp.
The cutters need to be sharpened when:
•Sawdust becomes powder-like.
•You need extra force to saw in.
•The cut path does not go straight.
•Vibration increases.
•Fuel consumption increases.
Cutter setting standards
Be sure to wear safety
gloves.
Before filing:
•Make sure the saw chain is held securely.
•Make sure the engine is stopped.
•Use a round file of proper...

EN 189. Troubleshooting Guide
9. Troubleshooting Guide
PROBLEME CAUSE REMEDY
1)
Starting failure
2)Lack of
power/Poor accel-
eration/Rough
idling
3)Oil does not
come out–Check fuel for water or substandard
mixture. 
–Check for engine flooding.
–Check spark ignition. 
–Check fuel for water or substandard
mixture. 
–Check air filter and fuel filter for
clogging. 
–Check carburetor for inadequate
adjustment.
–Check oil for substandard quality. 
–Check oil passage and ports for
clogging.–Replace with proper...

1. Pour la sécurité FR 1
Cher Client,
Nous désirons avant tout vous remercier de la préférence que vous avez accordée à nos produits et nous espé-
rons que l’utilisation de cette machine vous réservera de grandes satisfactions et répondra pleinement à votre
attente. Ce manuel a été rédigé pour vous permettre de bien connaître votre machine et de l’utiliser dans les
meilleures conditions de sécurité et d’efficacité; n’oubliez pas qu’il est partie intégrante de la machine, gardez-le
à portée de la main...

1.Ne jamais utiliser une tronçonneuse
lorsqu’on est fatigué, malade, énervé,
sous l’influence de médicaments
entraînant vertige ou somnolence, ou
encore sous l’influence de l’alcool ou
de drogues.
2.Porter des chaussures de sécurité,
des vêtements moulants, des lunettes
de protection, un casque de sécurité
et un casque anti-bruit. Utiliser les
gants anti-vibrations.
3.Maintenir la chaîne de scie bien
tendue et la scie, y compris le systè-
me AV, bien entretenue. Une chaîne
lâche augmente le temps de...

(En particulier, toute tentative de
démontage du volant ou de l’em-
brayage sans disposer des outils
appropriés risque de fissurer le volant
qui pourrait ensuite se désintégrer en
marche).
16.Toujours arrêter le moteur avant
de poser la tronçonneuse.
17.Observer la plus grande prudence
en coupant les broussailles. Une liane
ou un arbrisseau se prenant dans la
chaîne risquent de faire perdre l’équi-
libre ou de cingler le visage.
18.Lorsqu’on coupe une branche en
flexion, prendre garde à la détente au...