Getnet Router GA-324WA User Manual

GA-324WA User Manual 
In the navigation bar, choose Network. The  Network  page that is displayed 
contains  LAN, WAN , and WLAN .   
3.4.1   LAN 
Choose  Network  > LAN. The LAN page that is displayed contains  LAN IP, 
DHCP , and DHCP Static IP . 
3.4.1.1 LAN IP 
Click LAN IP in the left pane. The page shown in the following figure appears. 
In this page, you can change IP address of the router. The default IP address is 
192.168.1.1. This is the private IP address of the router. This is the address...

GA-324WA User Manual 
Field Description 
255.255.0.0-255.255.255.254. 
Secondary IP Select it to enable the secondary LAN IP. The two 
LAN IP addresses must be in the different network.
IGMP Snooping You can disable or enable IGMP Snooping. 
Apply Changes Click it to save the settings of this page. 
 
3.4.1.2 DHCP 
Dynamic Host Configuration Protocol (DHCP) allows the individual PC to obain 
the TCP/IP configuration from the centralized DHCP server. You can configure 
this router as a DHCP server or...

GA-324WA User Manual 
Field Description 
Windows95, Windows NT and other systems that 
support the DHCP client. 
IP Pool Range It specifies the first and the last of contiguous IP 
address of the IP address pool. 
Show Client Click it, the Active DHCP Client Table  page appears. 
It shows the assigned IP address of the clients. 
Default 
Gateway Enter the IP default gateway of the IP address pool. 
Max Lease 
Time The lease time determines the period that the PCs 
retain the assigned IP addresses before...

GA-324WA User Manual 
Description Field 
consists of six pairs of hexadecimal character, for 
example, 00-A0-C5-00-02-12. 
Expired (s) 
It displays the lease time. The lease time determines 
the period that the PCs retain the assigned IP 
addresses before the IP addresses change. 
Refresh Click it to refresh this page. 
Close Click it to close this page. 
 
Choose  None in the  DHCP Settings  page. The page shown in the following 
figure appears. 
 
 
Choose  DHCP Relay  in the DHCP Mode page. The page...

GA-324WA User Manual 
 
The following table describes the parameters of this page: 
Field Description 
DHCP Mode 
If set to DHCP Relay, the router acts a surrogate DHCP 
Server and relays the DHCP requests and reponses 
between the remote server and the client. 
Relay Server Enter the DHCP server address provided by your ISP. 
 
3.4.1.3  DHCP Static IP 
Click  DHCP Static IP  in the left pane. The page shown in the following figure 
appears. You can assign the IP addresses on the LAN to the specific...

GA-324WA User Manual 
Field Description 
MAC address. 
 
3.4.2   WAN 
Choose Network  > WAN . The  WAN  page that is displayed contains  WAN, AT M  
Setting , and ADSL Setting . 
3.4.2.1 WAN 
Click WAN in the left pane. The page shown in the following figure appears. 
In this page, you can configure WAN interface of your router. 
 
 
The following table describes the parameters of this page: 
Field Description 
Default Route Selection You can choose  Auto or Specified. 
VPI The virtual path between two...

GA-324WA User Manual 
34 
Field Description 
ATM network, ranging from 0 to 255. 
VCI 
The virtual channel between two points in an 
ATM network, ranging from 32 to 65535 (1 to 
31 are reserved for known protocols) 
Encapsulation You can choose LLC and VC-Mux . 
Channel Mode You can choose  1483 Bridged, 1483 MER, 
PPPoE , PPPoA , or 1483 Routed . 
Enable NAPT 
Select it to enable the NAPT function of the 
router. If you do not select it and you want to 
access the Internet normally, you must add a...

GA-324WA User Manual 
Field Description 
Local IP Address It is the IP address of WAN interface that is 
provided by your ISP. 
Remote IP Address This is the gateway IP address that is 
provided by your ISP. 
Netmask It is the subnet mask of the local IP address. 
Unnumbered Select this checkbox to enable IP 
Unnumbered function.   
Add 
After configuring the parameters of this page, 
click it to add a new PVC into the current ATM 
VC table. 
Modify 
Select a PVC in the current ATM VC table, 
then...

GA-324WA User Manual 
 
 
The following table describes the parameters and buttons of this page: 
Field Description 
Protocol The protocol type used for this WAN connection. 
ATM VCC The ATM virtual ci rcuit connection assigned for 
this PPP interface (VPI/VCI). 
Login Name The login name provided by your ISP. 
Password The password provided by your ISP. 
Authentication MethodYou can choose  AUTO, CHAP , or PAP . 
Connection Type You can choose  Continuous, Connect on 
Demand , or Manual. 
Idle Time (s)...

GA-324WA User Manual 
Field Description 
Apply Changes Click it to save the settings of this page. 
Return Click it to return to the WAN Interface page. 
Undo Click it to refresh this page. 
 
3.4.2.2 ATM Setting 
Click ATM Setting  in the left pane. The page shown in the following figure 
appears. 
In this page, you can configure the para meters of the ATM, including QoS, PCR, 
CDVT, SCR, and MBS 
 
 
The following table describes the parameters and buttons of this page: 
Field Description 
VPI The...