Getnet Router GA-324WA User Manual

GA-324WA User Manual 
8 
When connection 2 is used, the filter must be installed close to the telephone 
cable. See Figure2. Do not use the splitter to replace the filter. 
Installing a telephone directly before the splitter may lead to failure of connection 
between the device and the central office, or failure of Internet access, or slow 
connection speed. If you really need to add a telephone set before the splitter, 
you must add a microfilter before a telephone set. Do not connect several...

GA-324WA User Manual 
3   About the Web Configuration 
This chapter describes how to configure the router by using the Web-based 
configuration utility. 
3.1   How to Access the Router 
The following is the detailed description of accesing the router for the first time. 
Step 1  Open the Internet Explorer (IE) browser and enter http://192.168.1.1. 
Step 2 In the LOGIN page that is displayed, enter the username and 
password. 
   The username and password of the super user are  admin and admin. 
   The...

GA-324WA User Manual 
 
If you log in as a common user, you can check the status of the router, but can 
not configure the most of the settings. 
3.2   Status 
In the navigation bar, choose  Status. In the  Status page that is displayed 
contains:  System, LAN , WLAN , WAN , Port Mapping, Statistic , and ARP Table . 
3.2.1   System 
Choose Status > System . The page that is displayed shows the current status 
and some basic settings of the router, such as  software version, DSP version, 
uptime ,...

GA-324WA User Manual 
3.2.2   LAN 
Choose Status > LAN . The page that is displayed shows some basic LAN 
settings of the router. In this page, you can view the LAN IP address, DHCP 
server status, MAC address, and DHCP client  table. If you want to configure the 
LAN network, refer to chapter 
3.4.1.1 LAN IP. 
 
3.2.3   WLAN 
Choose  Status > WLAN . The page that is displayed shows some basic WLAN 
settings of the router. In this page, you can view basic status of WAN and DNS 
server. If you want to...

GA-324WA User Manual 
 
3.2.4   WAN 
Choose Status > WAN . The page that is displayed shows some basic WAN 
settings of the router. In this page, you can view basic status of WAN and DNS 
server. If you want to configure the WAN network, refer to chapter 
3.4.2.1 WAN. 
 
3.2.5   Port Mapping 
Choose  Status > Port Mapping . In this page, you can view the mapping relation 
and the status of port mapping. 
12  

GA-324WA User Manual 
 
3.2.6   Statistics 
Choose Status > Statistics.  The Statistics  page that is displayed contains 
Traffic Statistic  and DSL Statistic . 
3.2.6.1 Traffic Statistic 
Click Traffic Statistic  in the left pane. The page shown in the following figure 
appears. In this page, you can view the statistics of each network port. 
 
13  

GA-324WA User Manual 
3.2.6.2 DSL Statistic 
Click DSL Statistic in the left pane. The page shown in the following figure 
appears. In this page, you can view the ADSL line status, upstream rate, 
downstream rate, and other information. 
 
3.2.7   ARP Table 
Choose  Status > ARP Table. In the  ARP Table page, you can view the table that 
shows a list of learned MAC addresses. 
 
3.3   Wizard 
When subscribing to a broadband service, you should be aware of the method by 
which you are connected to the...

GA-324WA User Manual 
using a static or dynamic IP address, and the protocol that you use to 
communicate on the Internet. 
In the navigation bar, choose Wizard. The page shown in the following figure 
appears. The  Wizard page guides fast and accurate configuration of the Internet 
connection and other important parameters. The following sections describe 
these various configuration parame ters. Whether you configure these 
parameters or use the default ones, click  NEXT to enable your Internet...

GA-324WA User Manual 
 
The following table describes the parameters of this page: 
Field Description 
State 
You can disable or enable NTP function. You have to 
enable it if you want to configure the parameters in this 
page. 
Server IP Enter the IP address of the specified time server manually.
Interval 
Set the interval that the router obtains the time from the 
time server. That is, the interval  that the router verifies the 
time with the server. 
Time Zone Choose the time zone of your country....

GA-324WA User Manual 
Description Field 
network, and its valid value is from 0 to 255. 
   The virtual channel between two points in an ATM network, ranging from 32 to 65535 (0 to 31 is 
reserved for local management of ATM traffic). 
Encapsulation Select the method of encapsulation provided by your 
ISP. You can select  LLC/SNAP or VC-Mux . 
Channel Mode 
Select the WAN connection type. You can select  1483 
Bridged, 1483 MER, PPP over Ethernet (PPPoE) , 
PPP over ATM (PPPoA) , or 1483 Routed . 
PPP...