Getnet Router GA-324WA User Manual

GA-324WA User Manual 
18 
Field Description 
WLAN 
Interface 
You can choose Enable or Disable. By default, WAN 
interface is enabled. 
You need to enable WAN interface, and then you can 
set the parameters in this page. 
Band 
Choose the working mode of the router. You can choose 
2.4 GHz (B) , 2.4 GHz (G) , or 2.4 GHz (B +  G) . By 
defaut, the band is  2.4 GHz (B + G) . 
SSID 
The service set identification (SSID) is a unique name to 
identify the router in the wireless LAN. Wireless stations...

GA-324WA User Manual 
 
1483 Bridged 
 
 
In the Setup WAN Interface page, enter the correct PVC, set the channel mode 
to 1483 MER, and click NEXT . The page shown in the following figure appears. 
19  

GA-324WA User Manual 
 
 
The following table describes the parameters of this page: 
Field Description 
WLAN 
Interface 
You can choose Enable or Disable. By default, WAN 
interface is enabled. 
You need to enable WAN interface, and then you can 
set the parameters in this page. 
Band 
Choose the working mode of the router. You can choose 
2.4 GHz (B) , 2.4 GHz (G) , or 2.4 GHz (B +  G) . By 
defaut, the band is  2.4 GHz (B + G) . 
SSID 
The service set identification (SSID) is a unique name to...

GA-324WA User Manual 
Description Field 
the connection between the router through WPA or 
WPA2. 
Key differences between WPA and WEP are user 
authentication and improved data encryption. 
 
After finishing the configuration, click NEXT. The page shown in the following 
figure appears. 
 
1483 MER 
21  

GA-324WA User Manual 
 
 
The following table describes the parameters of this page: 
Field Description 
PVC Settings 
   The virtual path between two points in an ATM network, and its valid value is from 0 to 255. 
   The virtual channel between two points in an ATM network, ranging from 32 to 65535 (0 to 31 is 
reserved for local management of ATM traffic). 
Encapsulation Select the method of encapsulation provided by your 
ISP. You can select  LLC/SNAP or VC-Mux . 
Channel Mode 
Select the WAN...

GA-324WA User Manual 
Description Field 
Default Route You can select Enable or Disable . 
DNS Settings 
  Obtain DNS Automatically : The dynamic IP 
address is not fixed. Your ISP assigns the different 
one each time. 
   Use the following DNS server address : If you 
want to enter the DNS server address by yourself, 
select it and enter the related data. 
 
Click  NEXT , the page shown in the following figure appears. 
 
 
The following table describes the parameters of this page: 
Field Description...

GA-324WA User Manual 
Description Field 
client connecting to the router. 
Encryption 
Configure the wireless encryption mode. You can 
choose None, WEP , WPA (TKIP) , WPA (AES) , WPA2 
(AES) , WPA2  (TKIP) , or WPA2 Mixed . 
   Wired equivalent privacy (WEP) encrypts data 
frames before transmitting over the wireless 
network. 
   Wi-Fi protected access (WPA) is a subset of the IEEE802.11i security specification draft.   
   WPA2 Mixed  is the collection of WPA and WPA2 
encryption modes. The wireless...

GA-324WA User Manual 
 
 
The following table describes the parameters of this page: 
Field Description 
PVC Settings 
   The virtual path between two points in an ATM network, and its valid value is from 0 to 255. 
   The virtual channel between two points in an ATM network, ranging from 32 to 65535 (0 to 31 is 
reserved for local management of ATM traffic). 
Encapsulation Select the method of encapsulation provided by your 
ISP. You can select  LLC/SNAP or VC-Mux . 
Channel Mode 
Select the WAN...

GA-324WA User Manual 
Description Field 
address that your ISP provides. 
Default Route You can select Enable or Disable . 
DNS Settings 
  Obtain DNS Automatically : The dynamic IP 
address is not fixed. Your ISP assigns the different 
one each time. 
   Use the following DNS server address : If you 
want to enter the DNS server address by yourself, 
select it and enter the related data. 
 
Click  NEXT , the following page appears. 
 
The following table describes the parameters of this page: 
Field...

GA-324WA User Manual 
Description Field 
client connecting to the router. 
Encryption 
Configure the wireless encryption mode. You can 
choose None, WEP , WPA (TKIP) , WPA (AES) , WPA2 
(AES) , WPA2  (TKIP) , or WPA2 Mixed . 
   Wired equivalent privacy (WEP) encrypts data 
frames before transmitting over the wireless 
network. 
   Wi-Fi protected access (WPA) is a subset of the IEEE802.11i security specification draft.   
   WPA2 Mixed  is the collection of WPA and WPA2 
encryption modes. The wireless...