Home > GE > Ultrasound System > GE Vivid 7 Service Manual

GE Vivid 7 Service Manual

Here you can view all the pages of manual GE Vivid 7 Service Manual. The GE manuals for Ultrasound System are available online for free. You can easily download all the documents as PDF.

Page 731

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 9 - Renewal Parts 9 - 35
9-15-2 CRT Monitor
Figure 9-14   CRT Monitor Assembly
Table 9-27    CRT Monitor Parts   
ITEMPART NAMEPART NUMBERDESCRIPTIONQTYFRU
1 P9534WA CRT MONITOR ASSY 2283334-4
OR
2283334-5 OPEN FRAME 17” MONITOR 1 Y
2 MON CABLE ASSY 2304171 MONITOR CABLE ASSEMBLY
1Y
3 P9536AL MON-REAR-NSP-ASSY 2303931MONITOR REAR COVER ASSEMBLY (WITHOUT 
SPEAKERS) 1Y
4MON CAP ASSY2303932MONITOR SCREW CAPS.2Y
5MON FRONT...

Page 732

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
9 - 36 Section 9-16 - Casters
Section 9-16
Casters
 
Figure 9-15   Casters
Table 9-28    Casters 
ITEMPART NAME
PART 
NUMBER
DESCRIPTIONQTYFRU
1 CASTER FRONT 2293008-2FRONT CASTER WITHOUT SWIVEL LOCK ASSEMBLY.
2Y
2 CASTER REAR 2 293008-3REAR CASTER WITH SWIVEL LOCK ASSEMBLY.
2Y
3 CASTER HUB CAPS 2293008-5 Need to order 2 per caster, adhesive mounting 1 Y
12
3 

Page 733

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 9 - Renewal Parts 9 - 37
Section 9-17
Brake Assembly
Figure 9-16   Brake Assembly and Console Lock
Table 9-29    Brake Assembly 
ITEMPART NAME
PART 
NUMBER
DESCRIPTIONQTYFRU
1 PEDAL ASSEMBLY
FB200595Brake Pedal Assembly
1Y
PEDAL ASSEMBLY FD200002Brake Pedal Assembly
REPLACEMENT FOR FB200595 1Y
2 ROD CONNECTION BRAKE LEFT  FB307471 1 Y
3ROD CONNECTION BRAKE RIGHT FB3074721Y
4SCREW, PT FASTENER M6 X12MM 
WN1411...

Page 734

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
9 - 38 Section 9-18 - Front-End Processor Card Cage
Section 9-18
Front-End Processor Card Cage
9-18-1 Introduction
Two versions of the Front-End Processor have been used;
• Front-End Processor Version 1 (FEP1), see page  9-42.
• Front-End Processor Version 2 (FEP2), see below.
9-18-2 Hardware/Software Versions,  Front-End Processor Version 2 (FEP2)
This overview is valid for the following Vivid 7 models:
• BT’03-RFI: FC000410,...

Page 735

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 9 - Renewal Parts 9 - 39
FC200459TX128-503
03 
(requires 
software 
v4.2.0 or  later)
030303
TRANSMITTER BOARD VERSION 5
2X TO BE USED IN UNITS WITH RT3D/4D
NOTE! Do not install one FC200459 and one  FC200375 in the same Vivid 7.
- MCD REV 07 DOC. ERROR FIX.
- MCD REV 06 Improved Manufacturing 
process. 
- MCD REV 05 Improved tolerances. 
(Manufacturing).
- MCD REV 04 Removed unused components.
- MCD REV 03 is the first...

Page 736

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
9 - 40 Section 9-18 - Front-End Processor Card Cage
9-18-3 Front-End Processor  Version 2 FRU Parts
 
 
Figure 9-17   PCB Boards FEP2
12
3
4567
89
10
12
13
1415
16
17 

Page 737

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 9 - Renewal Parts 9 - 41
9-18-3 Front-End Processor Vers ion 2 FRU Parts (cont’d)
Table 9-31    PCB Boards used in FEP- 2
ITEMPART NAME
PART 
NUMBER
DESCRIPTIONQTYFRU
1 RLY-3_MODULE FB200060RELAY PCB, VERSION 3 1 Y
2 RLY-4 FC200314RELAY PCB, VERSION 4. INTRODUCED 2004 1 Y
3 RX 128 BOARD VER. 4 FC200057PCB RX-128-4, RECEIVER PCB, VERSION 4 1 Y
4TX128-5FC200459
PCB TX-128-5, VERSION 5 - USED ON FEP2 (RFI)
WITHOUT 4D: 1X USED...

Page 738

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
9 - 42 Section 9-18 - Front-End Processor Card Cage
9-18-4 Hardware/Software Versions , Front-End Processor Version 1
This overview is valid for the following Vivid 7 models:
• FC000030, FC000060
• FC000180, FC000190, FC000200, FC000210
• FC000310, FC000320, FC000330, FC000340
Use Ta b l e 9 - 3 2  to verify the correct/needed revision on each card in the Card Rack (FEP1).
NOTE: Units with FEP1 can’t be upgraded to software...

Page 739

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 9 - Renewal Parts 9 - 43
FB200574 POWER, TX (TXPS) 03 03
Table 9-32    Required Revisions for Ca rds and Modules, Front-End Processor V1 
1st VERSION OF FRONT-END PROCESSOR CARD CAGE (FEP1)
PART 
NUMBER
NAME
v2.3.x/ v2.4.x
v3.1.x/
v3.3.x/ v3.5.x 
COMMENTSMCDMCD 

Page 740

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
9 - 44 Section 9-18 - Front-End Processor Card Cage
9-18-5 Front-End Processor  Version 1 FRU Parts
 
 
Figure 9-18   PCB Boards - FEP1
1
23
6
78
9
1011
12
1314
15
16
17
18
4a4b4c 
Start reading GE Vivid 7 Service Manual

Related Manuals for GE Vivid 7 Service Manual

All GE manuals