GE Vivid 7 Service Manual

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 9 - Renewal Parts 9 - 45
Table 9-33    PCB Boards used in FEP1 
ITEMPART NAME
PART 
NUMBER
DESCRIPTIONQTYFRU
1 RLY-3_MODULE FB200060RELAY PCB, VERSION 3 1 Y
2 RX 128-3B FB200831RECEIVER PCB, VERSION 3B 1 Y
3 RX 128 BOARD VER. 4 FC200057RECEIVER PCB, VERSION 4
REQUIRES SOFTWARE VERSION v2.3.0 OR NEWER REPLACES FB200831 1Y
4aMODULE TX128-2FB200170TRANSMITTER 128 PCB, VERSION 2 
1
Y
4bTRANSMITTER BOARDFC200022TRANSMITTER 128...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
9 - 46 Section 9-19 - Back-End Processor
Section 9-19
Back-End Processor
9-19-1 Overview
Several different Back-End Processors (BEPs) have been included in the Vivid 7 scanners and used as 
service parts, see table below.
Table 9-34    BEP overview
BEP MODELDESCRIPTION
LATEST SOFTWARE  (LIST UPDATED 08.OCT.2007)
LINK
RFT SYSTEMS
BEP (BEP1) FIRST BEP VERSION, INTRODUCED 2001 (RFT)
 V2.5.0, 
V3.5.0/V3.5.1,  V3.6.0/V3.6.2 PA G E...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 9 - Renewal Parts 9 - 47
9-19-2 FRU Parts for Back-End  Processor Version 4.3 (BEP4.3)
 
Figure 9-19   BEP 4.3 Parts
Table 9-35    BEP4.3 FRU Parts   sheet 1 of 2
ITEMPART NAME
PART 
NUMBER
DESCRIPTIONQTYFRU
1 BEP4 WITHOUT MO DRIVE FD200135Back-End Processor without MOD, without 4D Card. 
Use ONLY on units with RFI. 
If unit has BEP Ver. 4.3 w/4D with Part Number 
FD200145, order the part FD200135, BEP Ver. 4.3 wo/
4D, and...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
9 - 48 Section 9-19 - Back-End Processor
6
PATIENT IO MODULE FC200685WITH USB-1.1 INTERFACE. INTRODUCED FOR  BEP3.21Y
PATIENT IO MODULE FC200805WITH USB-2.0 INTERFACE. INTRODUCED FOR BEP4.21Y
7 FAN FOR BACK END PROCESSOR  2404028-11 For BEP3.x and BEP4.x 1 Y
8 PC2IP MODULE FC200617 1 Y
PC2IP2B FC200656 Communication between BEP and FEP2 (PC2IP) 1 Y
PC2IP3
FC200755Communication between BEP and FEP2 (PC2IP)
This card will be phased...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 9 - Renewal Parts 9 - 49
9-19-3 FRU Parts for Back-End  Processor Version 4.2 (BEP4.2)
 
Figure 9-20   BEP 4.2 Parts
Table 9-36    BEP4.2 FRU Parts   sheet 1 of 2
ITEMPART NAME
PART 
NUMBER
DESCRIPTIONQTYFRU
1 BEP4 WITHOUT MO DRIVE FC200817Back-End Processor without MOD, without 4D Card. 
Use ONLY on units with RFI. 
If unit has BEP Ver. 4.2 w/4D with Part Number 
FC200818, order the part FC200817, BEP Ver. 4.2 wo/
4D, and...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
9 - 50 Section 9-19 - Back-End Processor
6
PATIENT IO MODULE FC200685WITH USB-1.1 INTERFACE. INTRODUCED FOR  BEP3.21Y
PATIENT IO MODULE FC200805WITH USB-2.0 INTERFACE. INTRODUCED FOR BEP4.21Y
7 FAN FOR BACK END PROCESSOR  2404028-11 For BEP3.x and BEP4.x 1 Y
8 PC2IP MODULE FC200617 1 Y
PC2IP2B FC200656 Communication between BEP and FEP2 (PC2IP) 1 Y
PC2IP3
FC200755Communication between BEP and FEP2 (PC2IP)
This card will be phased...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 9 - Renewal Parts 9 - 51
9-19-4 FRU Parts for BEP 4  as Replacement for BEP 2.2
 
Figure 9-21   BEP4 (as replacement for BEP2.2)
Table 9-37    FRUs for BEP4 as Replacement for BEP 2.2 
ITEMPART NAME
PART 
NUMBER
DESCRIPTIONQTYFRU
1 BEP4 WITHOUT MO DRIVE FC200813Back-End Processor without MOD, with Frame Grabber. 
Use ONLY on units with RFI. 1Y
2MO DRIVE, 9.1 GBFC200271MOD DRIVE WITH MOUNTING BRACKETS1Y
3POWER...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
9 - 52 Section 9-19 - Back-End Processor
FILTER ASSEMBLY FOR BEP3  VIVID7 FC200631 1 Y
SECURING CLAMP F/MAIN POWER  CABLE TBD 1 N
Table 9-37    FRUs for BEP4 as Replacement for BEP 2.2 (cont’d)
ITEMPART NAME
PART 
NUMBER
DESCRIPTIONQTYFRU 

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 9 - Renewal Parts 9 - 53
9-19-5 FRU Parts for BEP4  as Replacement for BEP2.0
 
Figure 9-22   BEP 4 Parts
Table 9-38    FRUs for BEP4 as Replacement for BEP2.0   sheet 1 of 2
ITEMPART NAME
PART 
NUMBER
DESCRIPTIONQTYFRU
1 BEP4 WITHOUT MO DRIVE FC200809Back-End Processor without MOD, with Frame Grabber. 
Use ONLY on units with RFT.  1Y
2MO DRIVE, 9.1 GBFC200271MOD DRIVE WITH MOUNTING BRACKETS1Y
3POWER SUPPLY,...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
9 - 54 Section 9-19 - Back-End Processor
12FILTER ASSEMBLY FOR BEP3  VIVID7FC2006311Y
15 BATTERY ASSEMBLY 2266548-5 1 Y
BIOS BLASTER FC200832 1 Y
SYSTEM SOFTWARE (BASE IMAGE) FC200825 1 Y
Table 9-38    FRUs for BEP4 as Replacement for BEP2.0 (cont’d) sheet 2 of 2
ITEMPART NAME
PART 
NUMBER
DESCRIPTIONQTYFRU