GE Cpv14di018 Manual

2004/11 – Subject to change – Info 20151
Fieldbus Direct, CPV-CC
Technical data – Fieldbus node CPV-CC
CPV fieldbus node for communication
between a CPV valve terminal and a
higher- order master for Control &
Communication-Link (CC-Link) from
Mitsubishi. The fieldbus node is used
for activation of a CPV valve terminal
with 8 valve slices and 16 solenoid
coils and for displaying the switching
status via LED.
TheCPV-…valvesareactivatedusing
automatic current reduction, which
resultsinlesspowerconsumption...

Info 201 – Subject to change – 2004/1152
Fieldbus Direct, CPV-CC
Technical data – Fieldbus node CPV-CC
General technical data
Ty p eCPV10-GE-CC-8CPV14-GE-CC-8CPV18-GE-CC-8
Part No.197 959197 967197 969
CP string extensionYes
16 inputs (connection of an additional CP valve terminal or CP output module
not possible)
Fieldbus interfaceEither:

Sub- D, 9- pin socket

5-pin screw terminal strip
Baud rates[kbps]156 … 10 000
Set using DIL switch
Addressing range1…64
Set using DIL switch
No. of stations per...

2004/11 – Subject to change – Info 20153
Fieldbus Direct, CPV-CC
Technical data – Fieldbus node CPV-CC
Connection and display components
1
5 2
3
4
61Fieldbus connection, 9-pin Sub-D
socket
2Switch module (removable)
3Connection for voltage supply
(4-pin M12 plug, operating
voltage for electronics/sensors,
load voltage for CP valves)
4LEDs:
– Data communication (RUN)
– Operating voltage/error
(Pow/Err)
5CP extension connection
6Switching status displays of CPV
solenoid coils
Pin allocation for Sub-D...

Info 201 – Subject to change – 2004/1154
Fieldbus Direct, CPV-CC
Accessories – Fieldbus node CPV-CC
Ordering data
DesignationTy p ePart No.
Power supply
Power supply socket, straightFBSD-GD-718 497
FBSD-GD-918 495
Power supply socket, angledFBSD-WD-718 524
FBSD-WD-918 525
Bus connection Open Style, 5-pin screw terminal strip
Bus connection, 5-pin terminal strip for CC-LinkFBA-1-KL-5POL197 962
Fieldbus plug, Sub-D connectionFBS-SUB-9-GS-2x4POL-B532 220
Mounting screw for standard Sub- D (IP20)UNC...

2004/11 – Subject to change – Info 20155
©Copyright by Festo AG & Co. KG
Whilst every effort is made to ensure
that all dimensions and specifications
are correct, any printers’ errors not
rectified are outside the control of
Festo, who cannot be held responsible
forsame.ForLiabilityandGuarantee
conditions, refer to our standard
”Conditions of Sale”, available on
request from your local Festo office.
All rights reserved, including transla-
tion rights. No part of this publication
may be reproduced or...

Info 201 – Subject to change – 2004/1156
100 % service with 100 % partnership
Welcome to a world of service from
Festo. Customer orientation is not just
oureverydayphilosophy–itisour
launch pad for the future and the
route to success for both our cus-
tomers and ourselves.
Global presence, always close at
hand
– 52 national Festo companies in
constant on-line communication
– A presence in almost 176
countries, with a total of 10,500
staff
– Worldwide networking for consist-
ent standards of consultancy,...

2004/11 – Subject to change – Info 20157 Info service
– Full product documentation with
detailed technical information
– Attractive regular customer maga-
zines showing useful application
examples and new product in-
formation
– The latest information available via
the Internet at the click of a mouse
from http://www.festo.com
Everything from a single source
– Our catalogue includes over
16,400 products
– All our components are precisely
coordinated
– Drives and drive accessories
– Handling and vacuum...

Info 201 – Subject to change – 2004/1158
Festo automation components
Important components in our product range
Compressed air preparation

D series service units

MS series service units
Control technology

Individual valve CPE

Valve terminal CPV

Modular valve terminal MPA and electrical
terminal CPX

Smart Positioning Controller SPC200

Controller FEC Standard FC640
Long linear movement

Rodless cylinder DGPL

Electric toothed-belt drive DGE

Standard cylinder DNC and DSNU

Compact cylinder ADVU
Short...

2004/11 – Subject to change – Info 20159
Pneumatic Pictograms
Stroke lengthService
Flow rateRepair service
VoltageWorldwide service
ForceHotline
PressureCollection facility
Te m p e r a t u r eDelivery time
DiameterIn stock
VacuumNote
WidthTy p e d i s co n t i n u e d
New
Spare parts service