Gateway m675 User Manual

251
Reinstalling programs
www.gateway.com
4Insert the red Drivers and Applications CD into the CD or DVD drive. If the 
program starts automatically, go to Step 8.
- OR -
If the program does not start automatically, go to Step 5.
5Click Start, then click Run. The Run dialog box opens.
6In the Open text box, type d:\runmenu.exe (where d is the drive letter of 
your CD or DVD drive).
7Click OK.
8If this is the first time you have inserted the red Drivers and Applications 
CD, accept the End User License...

252
Chapter 14: Restoring Software
www.gateway.com
To reinstall other programs from a CD:
1If you just reinstalled Windows, go to Step 4. Otherwise, go to the next 
step.
2In Windows XP, click Start, Control Panel, then click 
Add or Remove Programs.
- OR -
In Windows 2000, click 
Start, Settings, Control Panel, then double-click the 
Add or Remove Programs icon.
3In the Currently Installed Programs list, click the program you want to 
uninstall, then click 
Change/Remove and follow the on-screen...

253
Reinstalling Windows
www.gateway.com
The Restoration CDs step you through reinstalling Windows XP or 
Windows 2000. If you are reinstalling Windows XP or Windows 2000, the 
Restoration CDs automatically reinstall the hardware device drivers and some 
programs as well. You can install any remaining programs by using the program 
CDs that came with your notebook. To reinstall your programs, follow the 
instructions in “Reinstalling programs” on page 250.
To reinstall Windows XP or Windows 2000, and the...

254
Chapter 14: Restoring Software
www.gateway.com
11When prompted, remove the red Drivers and Applications CD and insert 
the blue Operating System CD into the CD or DVD drive, then press any 
key to continue.
12When prompted, accept the License Agreement by pressing Y.
13Wait while the setup program copies files to your hard drive. When your 
notebook restarts, do NOT press any key to boot from CD.
14When prompted, insert the red Drivers and Applications CD, then click 
Continue. The Gateway...

15
255
Upgrading Your
Gateway M675
This chapter provides information about adding hardware 
devices to your notebook. Read this chapter to learn 
how to:
■Add and remove PC Cards
■Add and replace memory
■Replace the hard drive 

256
Chapter 15: Upgrading Your Gateway M675
www.gateway.com
Adding and removing a PC Card
Your notebook has a PC Card slot (also known as a PCMCIA card slot). This 
slot accepts one Type II card.
You do not need to restart your notebook when changing most cards because 
your notebook supports hot-swapping. Hot-swapping means that you can insert 
a PC Card while your notebook is running. If your PC Card does not work after 
hot-swapping, see the PC Card manufacturer’s documentation for further...

257
Adding and removing a PC Card
www.gateway.com
To remove a PC Card:
1Click the remove hardware icon in the taskbar, the PC Card name, then 
click
Stop.
-OR-
Turn off your notebook.
2Press the PC Card eject button once to release the eject button.
3Press the PC Card eject button again to eject the PC Card.
ImportantIf the remove hardware icon does not appear on the 
taskbar, click the show hidden icons button. 

258
Chapter 15: Upgrading Your Gateway M675
www.gateway.com
Preventing static electricity 
discharge
The components inside your notebook are extremely sensitive to static 
electricity, also known as electrostatic discharge (ESD).
Before installing memory or replacing the hard drive, follow these guidelines:
■Turn off your notebook.
■Wear a grounding wrist strap (available at most electronics stores) and 
attach it to a bare metal part of your workbench or other grounded 
connection.
■Touch a bare metal...

259
Adding or replacing memory
www.gateway.com
Before working with computer components, follow these guidelines:
■Avoid static-causing surfaces such as carpeted floors, plastic, and packing 
foam.
■Remove components from their antistatic bags only when you are ready 
to use them. Do not lay components on the outside of antistatic bags 
because only the inside of the bags provide electrostatic protection.
■Always hold components by their edges. Avoid touching the edge 
connectors. Never slide components...

260
Chapter 15: Upgrading Your Gateway M675
www.gateway.com
To add or replace memory modules:
1Follow the instructions under “Preventing static electricity discharge” on 
page 258.
2Turn off your notebook, disconnect the AC adapter and modem and 
network cables.
3Disconnect your notebook from the optional port replicator (see 
“Disconnecting from the port replicator” on page 274).
4Turn your notebook over so the bottom is facing up.
5Remove the battery. For more information, see “Changing batteries” on...