Gateway M465e Service Manual

Replacing the Bluetooth module www.gateway.com
57
6Remove the keyboard by following the instructions in “Replacing the 
keyboard” on page 28.
7Remove the LCD panel by following the instructions in “Replacing the LCD 
panel assembly” on page 35.
8Remove the palm rest by following the instructions in “Replacing the palm 
rest” on page 48.
9Disconnect the Bluetooth cable from the system board, then slide the 
Bluetooth module from the notebook.
10Slide the new Bluetooth module into the notebook.
11Connect...

Replacing Gateway Notebook Componentswww.gateway.com
58
Replacing the system board
Tools you need to complete this task:
Additional materials you need to complete this task:
■X-23-7762 thermal grease
Screws removed during this task:
Flat-blade driver Scribe or non-marring tool- OR -
Phillips #0 screwdriver
2 black (keyboard cover)4 chrome (LCD panel hinges)
2 black (hard drive kit)1 black (module)
2 chrome (modem)1 chrome (wireless card) 
(optional)
4 black (system board)
4 black (palm rest - top)
17...

Replacing the system board www.gateway.com
59
To replace the system board:  
1Complete the steps in “Preparing the notebook” on page 5.
2If your notebook has a module in the modular bay, remove it by following 
the instructions in “Removing the optional secondary battery” on page 7.
3Remove the memory by following the instructions in “Adding or replacing 
memory modules” on page 8.
4Remove the cooling assembly by following the instructions in “Replacing 
the cooling assembly” on page 12.
5If your new...

Replacing Gateway Notebook Componentswww.gateway.com
60
15Disconnect the speakers and the Bluetooth card.
16Remove the four screws that secure the system board to the notebook.
Speaker connectorBluetooth connector
Screws 

Replacing the system board www.gateway.com
61
17Turn the system board over and disconnect the external video board from 
the old system board and connect it to the new system board.
18Install the new system board into your notebook, replacing the screws you 
removed in Step 16.
19Reassemble the notebook. 

Replacing Gateway Notebook Componentswww.gateway.com
62
Replacing the external video board
Tools you need to complete this task:
Additional materials you need to complete this task:
■X-23-7762 thermal grease
Screws removed during this task:
Flat-blade driver Scribe or non-marring tool- OR -
Phillips #0 screwdriver5.0 mm hex nutdriver
2 black (keyboard cover)
4 chrome (LCD panel hinges)
2 black (hard drive kit)1 black (module)
4 black (system board)2 chrome hexnut (VGA connector)
2 black (external video...

Replacing the external video board www.gateway.com
63
To replace the external video board:  
1Complete the steps in “Preparing the notebook” on page 5.
2If your notebook has a module in the modular bay, remove it by following 
the instructions in “Removing the optional secondary battery” on page 7.
3Remove the cooling assembly by following the instructions in “Replacing 
the cooling assembly” on page 12.
4If the notebook has IEEE 802.11 wireless networking built in, unplug the 
antenna from the IEEE...

Replacing Gateway Notebook Componentswww.gateway.com
64
12Remove the screws that secure the external video board to the notebook.
13Disconnect the cable from the old external video board, then connect the 
cable to the new video board.
14Install the new external video board into your notebook, replacing the 
screws removed in Step 12.
15Reassemble the notebook.
Copyright
© 2006 Gateway, Inc. All rights reserved. Gateway, Gateway Country, the 
Gateway stylized logo, and the black-and-white spot design are...

MAN MYST / C SVC GDE R1 4/06