Home > Gateway > Notebook > Gateway M465e Service Manual

Gateway M465e Service Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Gateway M465e Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 54 Gateway manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Replacing the Bluetooth module www.gateway.com
    57
    6Remove the keyboard by following the instructions in “Replacing the 
    keyboard” on page 28.
    7Remove the LCD panel by following the instructions in “Replacing the LCD 
    panel assembly” on page 35.
    8Remove the palm rest by following the instructions in “Replacing the palm 
    rest” on page 48.
    9Disconnect the Bluetooth cable from the system board, then slide the 
    Bluetooth module from the notebook.
    10Slide the new Bluetooth module into the notebook.
    11Connect the Bluetooth cable to the system board.
    12Reassemble the notebook. 
    						
    							Replacing Gateway Notebook Componentswww.gateway.com
    58
    Replacing the system board
    Tools you need to complete this task:
    Additional materials you need to complete this task:
    ■X-23-7762 thermal grease
    Screws removed during this task:
    Flat-blade driver Scribe or non-marring tool- OR -
    Phillips #0 screwdriver
    2 black (keyboard cover)4 chrome (LCD panel hinges)
    2 black (hard drive kit)1 black (module)
    2 chrome (modem)1 chrome (wireless card) 
    (optional)
    4 black (system board)
    4 black (palm rest - top)
    17 black (palm rest - bottom)
    1-3 black (keyboard)
    2 chrome (TPM module) 
    						
    							Replacing the system board www.gateway.com
    59
    To replace the system board:  
    1Complete the steps in “Preparing the notebook” on page 5.
    2If your notebook has a module in the modular bay, remove it by following 
    the instructions in “Removing the optional secondary battery” on page 7.
    3Remove the memory by following the instructions in “Adding or replacing 
    memory modules” on page 8.
    4Remove the cooling assembly by following the instructions in “Replacing 
    the cooling assembly” on page 12.
    5If your new system board does not include a processor, remove the 
    processor from the old system board and install it on the new system 
    board by following the instructions in “Replacing the processor” on 
    page 15.
    6If the notebook has IEEE 802.11 wireless networking built in, remove the 
    IEEE 802.11 wireless card by following the instructions in “Replacing the 
    IEEE 802.11 wireless card” on page 18.
    7Remove the hard drive kit by following the instructions in “Replacing the 
    hard drive kit” on page 23.
    8Remove the keyboard cover by following the instructions in “Replacing 
    the keyboard cover” on page 26.
    9Remove the keyboard by following the instructions in “Replacing the 
    keyboard” on page 28.
    10Remove the LCD panel by following the instructions in “Replacing the LCD 
    panel assembly” on page 35.
    11Remove the palm rest by following the instructions in “Replacing the palm 
    rest” on page 48.
    12If your new system board does not include a modem, remove the modem 
    from the old system board and install it on the new system board by 
    following the instructions in “Replacing the modem” on page 51.
    13If your old system board includes a TPM module, remove the module from 
    the old system board and install it on the new system board by following 
    the instructions in “Replacing the TPM module” on page 54.
    14If your old system board includes a Bluetooth module, remove the module 
    from the old system board and install it on the new system board by 
    following the instructions in “Replacing the Bluetooth module” on 
    page 56. 
    						
    							Replacing Gateway Notebook Componentswww.gateway.com
    60
    15Disconnect the speakers and the Bluetooth card.
    16Remove the four screws that secure the system board to the notebook.
    Speaker connectorBluetooth connector
    Screws 
    						
    							Replacing the system board www.gateway.com
    61
    17Turn the system board over and disconnect the external video board from 
    the old system board and connect it to the new system board.
    18Install the new system board into your notebook, replacing the screws you 
    removed in Step 16.
    19Reassemble the notebook. 
    						
    							Replacing Gateway Notebook Componentswww.gateway.com
    62
    Replacing the external video board
    Tools you need to complete this task:
    Additional materials you need to complete this task:
    ■X-23-7762 thermal grease
    Screws removed during this task:
    Flat-blade driver Scribe or non-marring tool- OR -
    Phillips #0 screwdriver5.0 mm hex nutdriver
    2 black (keyboard cover)
    4 chrome (LCD panel hinges)
    2 black (hard drive kit)1 black (module)
    4 black (system board)2 chrome hexnut (VGA connector)
    2 black (external video board)
    4 black (palm rest - top)
    17 black (palm rest - bottom)
    1-3 black (keyboard) 
    						
    							Replacing the external video board www.gateway.com
    63
    To replace the external video board:  
    1Complete the steps in “Preparing the notebook” on page 5.
    2If your notebook has a module in the modular bay, remove it by following 
    the instructions in “Removing the optional secondary battery” on page 7.
    3Remove the cooling assembly by following the instructions in “Replacing 
    the cooling assembly” on page 12.
    4If the notebook has IEEE 802.11 wireless networking built in, unplug the 
    antenna from the IEEE 802.11 wireless card by following the instructions 
    in “Replacing the IEEE 802.11 wireless card” on page 18.
    5Remove the hard drive kit by following the instructions in “Replacing the 
    hard drive kit” on page 23.
    6Remove the keyboard cover by following the instructions in “Replacing 
    the keyboard cover” on page 26.
    7Remove the keyboard by following the instructions in “Replacing the 
    keyboard” on page 28.
    8Remove the LCD panel by following the instructions in “Replacing the LCD 
    panel assembly” on page 35.
    9Remove the palm rest by following the instructions in “Replacing the palm 
    rest” on page 48.
    10Remove the system board by following the instructions in “Replacing the 
    system board” on page 58.
    11Remove the hex nuts that secure the external video board to the 
    notebook.
    Hex nuts 
    						
    							Replacing Gateway Notebook Componentswww.gateway.com
    64
    12Remove the screws that secure the external video board to the notebook.
    13Disconnect the cable from the old external video board, then connect the 
    cable to the new video board.
    14Install the new external video board into your notebook, replacing the 
    screws removed in Step 12.
    15Reassemble the notebook.
    Copyright
    © 2006 Gateway, Inc. All rights reserved. Gateway, Gateway Country, the 
    Gateway stylized logo, and the black-and-white spot design are trademarks or 
    registered trademarks of Gateway, Inc. in the United States and other countries. 
    All other brands and product names are trademarks or registered trademarks 
    of their respective companies.
    Screws 
    						
    All Gateway manuals Comments (0)

    Related Manuals for Gateway M465e Service Manual