Gateway E-4610s User Manual

							www.gateway.com
65
7Pull the release latch down to the Unlock position on the 
5.25-inch bay, then slide the component forward and out 
of the bay.
8Lift the 5.25-inch drive bay from the chassis to remove it.
9Disconnect the power and data cables from the system 
board, carefully noting their locations and orientation. 
(You will reconnect the cables after you install the new 
board.)
10Remove the power supply by following the instructions 
in “Replacing the power supply” on page 62.
11Remove all memory modules by following the 
instructions in “Installing memory” on page 48.
8512733.book  Page 65  Friday, September 21, 2007  4:47 PM 
						

							CHAPTER 4: Upgrading Your Computer
66
12Remove the seven system board screws.
13Lift the system board up and out of the case.
14Align the new system board on the screw holes in the 
case, then secure it into the case with the screws you 
removed previously.
15If your replacement system board does not include a 
processor, go to the next step.
-OR-
Follow the instructions in “Replacing the processor” on 
page 57 to move the processor from your old system 
board to the new one.
16Reinstall the memory you removed previously.
17Reinstall the power supply into the case using the four 
screws you removed previously.
Screws
Screws
8512733.book  Page 66  Friday, September 21, 2007  4:47 PM 
						

							www.gateway.com
67
18Connect the power and data cables to the new system 
board using the notes you took previously, or use the 
following graphic as a guide:
19Replace the 5.25-inch component bay into the chassis.
20Slide the 5.25-inch component into the bay, then push 
up on the release latch to move it to the Lock position.
Front panel
Front (CPU ) fan
Power  (AUX)
Memory card reader
connectorUSB header Chassis intrusion switchSATA connectors Power (main)IDE connector
8512733.book  Page 67  Friday, September 21, 2007  4:47 PM 
						

							CHAPTER 4: Upgrading Your Computer
68
21Reconnect the component cables using the notes you 
took previously.
22Connect the fan cable to the system board, then reinstall 
the fan.
23Reinstall any expansion cards you removed.
24Replace the front bezel, replace the hard drive bracket, 
then replace the side panel.
8512733.book  Page 68  Friday, September 21, 2007  4:47 PM 
						

							CHAPTER5
69
Maintaining Your
Computer
Setting up a maintenance schedule
Caring for your computer
Cleaning your computer
Updating Windows
Using BigFix
Managing hard drive space
Scheduling maintenance tasks
Moving from your old computer
8512733.book  Page 69  Friday, September 21, 2007  4:47 PM 
						

							CHAPTER 5: Maintaining Your Computer
70
Setting up a maintenance 
schedule
Use the following table to set up a regular maintenance 
schedule.
Maintenance taskWeeklyMonthlyWhen 
needed
Check for virusesXXX
Run Windows Update X X
Manage hard drive spaceX
Clean up hard drives X X
Scan hard drive for errorsXX
Defragment hard drive X X
Back up filesXXX
Clean computer case and 
peripheral devicesX
8512733.book  Page 70  Friday, September 21, 2007  4:47 PM 
						

							www.gateway.com
71
Caring for your computer
To extend the life of your computer:
Be careful not to bump or drop your computer, and do 
not put any objects on top of it. The case, although 
strong, is not made to support extra weight.
When transporting your computer, we recommend that 
you put it in the original packaging materials.
Keep your computer away from magnetic fields. 
Magnetic fields can erase data on hard drives.
Never turn off your computer when the drive indicator 
is on because data on the hard drive could be lost or 
corrupted.
Avoid subjecting your computer to extreme temperature 
changes. The case can become brittle and easy to break 
in cold temperatures and can melt or warp in high 
temperatures. Damage due to either extreme is not 
covered by your warranty. As a general rule, your 
computer is safest at temperatures that are comfortable 
for you.
Keep all liquids away from your computer. When spilled 
onto computer components, almost any liquid can result 
in expensive repairs that are not covered under a 
standard warranty.
Avoid dusty or dirty work environments. Dust and dirt 
can clog the internal mechanisms and can lead to 
permanent damage to your computer.
Do not block the ventilation fan slots. If these slots are 
blocked, your computer may overheat, resulting in 
unexpected shutdown or permanent damage.
When storing your computer for an extended period of 
time, unplug AC power.
8512733.book  Page 71  Friday, September 21, 2007  4:47 PM 
						

							CHAPTER 5: Maintaining Your Computer
72
Cleaning your computer
Keeping your computer clean and the vents free from dust 
helps keep your computer performing at its best. You may 
want to gather these items and put together a computer 
cleaning kit:
A soft, lint-free cloth
An aerosol can of air that has a narrow, straw-like 
extension
Cotton swabs
An optical disc drive cleaning kit
Cleaning the exterior
Always turn off your computer and other peripheral 
devices before cleaning any components.
Use a damp, lint-free cloth to clean your computer and 
other parts of your system. Do not use household 
abrasive or solvent cleaners because they can damage 
the finish on components.
Your computer is cooled by air circulated through the 
vents on the case, so keep the vents free of dust. With 
your computer turned off and unplugged, brush the 
dust away from the vents with a damp cloth. Be careful 
not to drip any water into the vents. Warning
When you shut down your computer, the power turns off, but some 
electrical current still flows through it. To avoid possible injury from electrical 
shock, unplug the power cord, modem cable, and network cable from the wall 
outlets.
8512733.book  Page 72  Friday, September 21, 2007  4:47 PM 
						

							www.gateway.com
73
Cleaning the keyboard
You should occasionally clean the keyboard to remove dust and 
lint trapped under the keys.
To clean the keyboard:  
1Use an aerosol can of air with a narrow, straw-like 
extension to remove dust and lint trapped under the 
keys.
2If you spill liquid on the keyboard, turn off your 
computer and turn the keyboard upside down. Let the 
liquid drain, then let the keyboard dry before trying to 
use it again. If the keyboard does not work after it dries, 
you may need to replace it.
Cleaning the monitor 
To clean the monitor:  
To clean an LCD flat panel monitor, use a soft cloth and 
water to clean the screen. Dampen the cloth (never apply 
liquid directly to the screen), then wipe the screen with 
the cloth.
To clean a CRT monitor, use a soft cloth and glass cleaner 
to clean the screen. Squirt a little cleaner on the cloth 
(never directly on the screen) , then wipe the screen with 
the cloth.
Cleaning the mouse
If the mouse pointer begins moving erratically across the 
screen or becomes difficult to control precisely, cleaning the 
mouse will likely improve its accuracy.
To clean the mouse:  
Wipe the bottom of the mouse with a damp, lint-free 
cloth. Caution
A flat-panel monitor is made of specially coated glass and can be scratched 
or damaged by abrasive or ammonia-based glass cleaners.
8512733.book  Page 73  Friday, September 21, 2007  4:47 PM 
						

							CHAPTER 5: Maintaining Your Computer
74
Cleaning optical discs
Optical discs (CDs, DVDs, and Blu-ray Discs) get dirty from 
frequent handling.
To clean an optical disc:  
Wipe from the center to the edge, not around in a circle, 
using a product made especially for the purpose.
Updating Windows
Windows Update helps you keep your computer up-to-date. 
Use Windows Update to choose updates for your computer’s 
operating system, software, and hardware. New content is 
added to the site regularly, so you can always get the most 
recent updates and fixes to protect your computer and keep 
it running smoothly. Windows Update scans your computer 
and provides you with a tailored selection of updates that 
apply only to the software and hardware on your computer.
For information on running Windows Update, see “Windows 
Update” in your online User Guide. Windows Update can also 
be controlled through the Windows Security Center. For more 
information, see “Protecting Your Computer” in your online 
User Guide. 
Help
For more information about Windows Update, click Start, then click Help 
and Support. Type windows update in the Search Help box, then press 
E
NTER.
8512733.book  Page 74  Friday, September 21, 2007  4:47 PM