Gateway 200stm User Manual

240
Chapter 15: Restoring Software
www.gateway.com 

16
241www.gateway.com
Upgrading Your
Notebook
This chapter provides information about adding hardware 
devices to your notebook. Read this chapter to learn how to:

Add and remove PC Cards

Add and replace memory 

242
Chapter 16: Upgrading Your Notebook
www.gateway.com
Adding and removing a PC Card
Your notebook has a PC Card slot (also known as a PCMCIA card slot). This 
slot accepts a single Type  I or Type II card.
You do not need to restart your notebook when changing most cards because 
your notebook supports hot-swapping. Hot-swapping means that you can insert 
a PC Card while your notebook is running. If your PC Card does not work after 
hot-swapping, see the PC Card manufacturer’s documentation for further...

243
Adding and removing a PC Card
www.gateway.com
To remove a PC Card:
1Click the remove hardware icon in the taskbar, the PC Card name, then 
click
Stop.
-OR-
Turn off your notebook.
2Release the eject button by pressing the PC Card eject button once.
3Eject the PC Card by pressing the eject button again.
ImportantIf the remove hardware icon does not appear on the 
taskbar, click the show hidden icons button. 

244
Chapter 16: Upgrading Your Notebook
www.gateway.com
Preventing static electricity 
discharge
The components inside your computer are extremely sensitive to static 
electricity, also known as electrostatic discharge (ESD).
Before installing memory, follow these guidelines:

Turn off your notebook.

Wear a grounding wrist strap (available at most electronics stores) and 
attach it to a bare metal part of your workbench or other grounded 
connection.

Touch a bare metal surface on your workbench or...

245
Preventing static electricity discharge
www.gateway.com
Before working with computer components, follow these guidelines:

Avoid static-causing surfaces such as carpeted floors, plastic, and packing 
foam.

Remove components from their antistatic bags only when you are ready 
to use them. Do not lay components on the outside of antistatic bags 
because only the inside of the bags provide electrostatic protection.

Always hold components by their edges. Avoid touching the edge 
connectors. Never slide...

246
Chapter 16: Upgrading Your Notebook
www.gateway.com
Adding or replacing memory
Your notebook uses memory modules called SO-DIMMs (Small Outline Dual 
Inline Memory Modules). The modules are available in various capacities and 
any module can be placed in any available slot. Use only memory modules 
designed for the Gateway 200STM for upgrading your memory.
To add or replace a memory module:
1Follow the instructions under “Preventing static electricity discharge” on 
page 244.
2Turn off your notebook,...

247
Adding or replacing memory
www.gateway.com
6Remove the memory bay cover screw, then remove the memory bay cover.
7If you are removing a module, gently press outward on the clip at each 
end of the memory module until the module tilts upward.
8Pull the memory module out of the slot. 

248
Chapter 16: Upgrading Your Notebook
www.gateway.com
9Hold the new or replacement module at a 30-degree angle and press it into 
the empty memory slot. This module is keyed so it can only be inserted 
in one direction. If the module does not fit, make sure that the notch in 
the module lines up with the tab in the memory bay.
10Gently push the module down until it clicks in place.
11Replace the memory bay cover and tighten the cover screw.
12Insert the battery, then turn your notebook over.
13Dock...

17
249www.gateway.com
Troubleshooting
This chapter provides some solutions to common notebook 
problems. Read this chapter to learn how to:

Troubleshoot typical hardware and software problems

Get telephone support

Use automated troubleshooting systems

Get tutoring and training
If the suggestions in this chapter do not correct the problem, 
see “Getting Help” on page 49 for more information about 
how to get help.