Fujitsu P42vha20 Users Manual

English
E-41
INITIALIZATION OF USER ADJUSTMENT VALUE (FACTORY DEFAULT)
1
“FACTORY DEFAULT” selected in the
main menu screen
Displays the message of whether to
proceed the initialization
Displays the message of having
completed the initialization
You can restore the values of the adjustment/setting made in the MENU to factory settings.
PICTURE  POSITION/SIZE  AUDIO  FEATURES  FACTORY DEFAULT
3
4
5
Press .
The main menu screen will appear.
Press  or  to select “FACTORY
DEFAULT”.
Each time you press  or ,...

E-42
OPTIONS
Wall-mounting unit 0° to 15° mounting angle P-WB4200
Hanging unit 0° to 15° mounting angle P-CT4200
StandP-TT4200
SpeakerP-SP4200 (for 42”)
P-SP5000 (for 50”)
(1 set of 2 speakers)
Speaker Stand P-ST4200 (for 42”)
P-ST5000 (for 50”)
(1 set of 2 speakers stands)
* When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met.
* The colours of options do not match the display colours perfectly.
Warning
To prevent...

English
E-43
INSTALLATION
1. Turn the power supply switch to OFF.
2. Remove the power plug from outlet.
3. Remove the plate attached to the bottom rear of the main unit from
the Video board unit mounting bracket (3 mm screw w/spring X 3).
4. Insert the Video board unit into the main unit slot using the guides
on the sides.
5. Completely insert the Video board until the plate touches the main
unit box.
6. Mount the plate using the 3 screws with spring removed earlier.
7. Affix the enclosed connector label...

E-44
FACTORY SETTINGS
This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value
of the first input signal.
To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. E-28–E-29 to adjust the
parameters.  When you finish, the settings will be automatically stored.  Thus, when the display receives that signal, pictures will be
displayed in accordance with the settings you most...

English
E-45
SPECIFICATION
Model P42VHA10E
Screen size 42 wide screen:
92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal)36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal)
Aspect ratio 16:9 (wide)
Weight 28.5 kg / 62.8 lbs
Outer dimensions 103.7 (W) x 64.2 (H) x 8.5 (D) cm
40.8 (W) x 25.3 (H) x 3.3 (D) inch
Power supply 110–240 VAC 50/60 Hz
Current rating 4.3–1.8 A
Number of pixels 852 (H) x 480 (V)
Display modes Video, S-video input: Normal/Compose/Wide1/Wide2/Zoom1/Zoom2
Component video input:...

E-46
SPECIFICATION (Continued)
Model P50XHA10E P42VHA20E
Screen size 50 wide screen: 42 wide screen:
110.6 cm (W) x 62.2 cm (H) (126.9 cm diagonal) 92.0 cm (W) x 51.8 cm (H) (106.0 cm diagonal)43.5 inch (W) x 24.5 inch (H) (50.0 inch diagonal) 36.2 inch (W) x 20.4 inch (H) (41.7 inch diagonal)
Aspect ratio 16:9 (wide)
Weight 45.0 kg / 99.2 lbs 29.5 kg / 65.0 lbs
Outer dimensions 121.4 (W) x 72.8 (H) x 9.8 (D) cm 103.7 (W) x 64.2 (H) x 8.5 (D) cm
47.8 (W) x 28.7 (H) x 3.9 (D) inch 40.8 (W) x 25.3 (H) x...

E-47
English
CLEANING AND MAINTENANCE
Action
•Check whether the power plug is securely inserted into the receptacle.
•Check cables for disconnection.
•Check whether the power for all input equipment is ON.
•Check for connection to wrong terminals or for wrong input mode.
•Check whether the input mode display is coloured pink.Special setup may have been
made. Return to original setup or initialize the User adjustment value.
•Check for incorrect battery orientation.
•Check for dead batteries.
•Check for...