Fujitsu P42vha20 Users Manual

							Before using the display, read this manual carefully so that you know how to use the display correctly.
Refer to this manual whenever questions or problems about operation arise.  Be sure to read and observe the
safety precautions.
Keep this manual where the user can see it easily.
* Installation and removal require special expertise.  Consult your product dealer for details.
Contents
Before Use
• Safety Precautions ··································· E-2–E-3
• Features ···························································· E-4
• Accessories ······················································ E-5
• Handy Tips ······················································· E-5
• Installation ······················································· E-6
Usage
• Part Names and Functions ···················· E-7–E-10
• Using the Remote Control ··················· E-11–E-12
• Connecting the Display to External
Equipment ············································ E-13–E-18
• Basic Operations ············································ E-19
• Selecting Input Mode ····································· E-20
• Other Basic Operations ································· E-21
•
Watching Pictures on the Wide Screen ···E-22–E-23Adjustments
• Adjustment Menu ········································· E-24
• Adjusting Pictures (PICTURE Menu) ··· E-25–E-27
• Adjusting Screen Position and Size
(POSITION/SIZE Menu) ························ E-28–E-29
• Adjusting AUDIO (AUDIO Menu) ········ E-30–E-31
•
Other Adjustments (FEATURES Menu) ···E-32–E-40
• Initialization of User Adjustment Value
(FACTORY DEFAULT) ····································· E-41
Others
• Options ·················································· E-42–E-43
• Factory Settings ············································ E-44
• Specification ········································· E-45–E-46
• Cleaning and Maintenance ···························· E-47 PagePage
EnglishUSER’S MANUAL
42”/50” WIDE PLASMA DISPLAY
FOR FUJITSU 42” WIDE  (MODEL: P42VHA10E/P42HHA10E/P42VHA20E)
WITH OPTIONAL VIDEOBOARD (P-TE1000E/P-TE1010E).
FOR FUJITSU 50” WIDE 
 (MODEL: P50XHA10E)
WITH OPTIONAL VIDEOBOARD (P-TE1000E/P-TE1010E).
*is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.
Please Note:Video functionality is only available if the plasma screen has the optional
videoboard P-TE1000E or P-TE1010E fitted.

&17)&07	IZP
03.1.16, 12:12 Page 2EPCF
1BHF.BLFS
+11$
 
						

							E-2
SAFETY PRECAUTIONS
IMPORTANT INFORMATION
IMPORTANT
WARNING:
This is a Class B product.  In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
WARNING:TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
FCC NOTICE
• P42VHA10E/P42HHA10E/P50XHA10E/P42VHA20E with optional Videoboard (P-TE1000E/P-TE1010E): A Class B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  These
limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.  However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT SAFETY INSTRUCTIONS
Electrical energy can perform many useful functions.  This unit has been engineered and manufactured to assure your personal safety.  But
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD.  In order not to defeat the safeguards
incorporated into this product, observe the following basic rules for its installation, use and service.  Please read these “Important
Safeguards” carefully before use.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifier’s) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
 to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.CAUTION:
TO PREVENT  THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

&17)&07	@
03.1.16, 11:27 Page 2EPCF
1BHF.BLFS
+11$
 
						

							E-3
English
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, dose not operate normally, or has been dropped.
–Unplug this product from the wall outlet before cleaning.  Do not use liquid cleaners or aerosol cleaners.  Use a damp cloth for cleaning.
–Do not use attachments not recommended by the product manufacturer as they may cause hazards.
–Do not use immediately after moving from a low temperature to high temperature, as this causes condensation, which may result in fire,
electric shock, or other hazards.
–The apparatus shall not be exposed to dripping or splashing.
–No objects filled with liquids, such as vases, shall be placed on the apparatus.
–Do not place this product on an unstable cart, stand, or table.  The product may fall, causing serious injury to a child or adult, and serious
damage to the product.  The product should be mounted according to the manufacturer’s instructions, and should use a mount
recommended by the manufacturer.
–When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces which may cause the
product and cart to overturn, damaging equipment or causing possible injury to the operator.
–Slots and openings in the cabinet are provided for ventilation.  These ensure reliable operation of the product and protect it from
overheating.  These openings must not be blocked or covered.  (The openings should never be blocked by placing the product on bed,
sofa, rug, or other similar surface.  It should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided and the manufacturer’s instructions have been adhered to.)
For proper ventilation, separate the product from other equipment, which may prevent ventilation, and keep distance more than 10 cm.
–This product should be operated only from the type of power source indicated on the label.  If you are not sure of the type of power
supply of your home, consult your product dealer or local power company.
–This product is equipped with a three-wire plug.  This plug will fit only into a grounded power outlet.  If you are unable to insert the plug
into the outlet, contact your electrician to install the proper outlet.  Do not defeat the safety purpose of the grounded plug.
–Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them.  Pay
particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.
–For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the cable system.  This will prevent damage to the product due to lightning and power line surges.
–
Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock.
–Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that
could result in a fire or electric shock.  Never spill liquid of any kind on the product.
–Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards.
Refer all service to qualified service personnel.
–
Unplug this product from the wall outlet and refer service to qualified service personnel if the product does not operate normally by following
the operating instructions.  Adjust only those controls that are covered by the Operation Manual, as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
–When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or with
same characteristics as the original part.  Unauthorized substitutions may result in fire, electric shock, or other hazards.
–Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the
product is in proper operating condition.
–The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other products
(including amplifiers) that produce heat.
–When connecting other products such as VCR’s, and personal computers, you should turn off the power of this product for protection
against electric shock.
–Do not place combustibles behind the cooling fan.  For example, cloth, paper, matches, aerosol cans or gas lighters that present special
hazards when overheated.
–Use only the accessory cord designed for this product to prevent shock.
The power supply voltage rating of this product is AC110–240 V (42”) and AC220–240 V (50”), and the power cord attached conforms to
the following power supply voltage.  Use only the power cord designated by our dealer to ensure Safety and EMC.
When it is used with other power supply voltage, the power cable must be changed.
Use the standard power plug and cord set of the specified country.
Consult your product dealer.
Power cord
AC 240 V (SAA TYPE)(Not included)AC 200–240 V(Included)AC 100–125 V(Not included)Power supply voltage:

&17)&07	@
03.1.16, 11:27 Page 3EPCF
1BHF.BLFS
+11$
 
						

							E-4
FEATURES
Variety of input signals
•In addition to mD-sub terminal, the display also supports input of digital RGB signal input enabling DVI standard (HDCP*) high
definition picture quality.
•Depending on the model, the display supports video input for different colour television systems as follows: NTSC, PAL, SECAM,
PAL60, N-PAL, M-PAL, 4.43NTSC.
Desired screen size
•This display offers a total of five different screen sizes in video input mode: Normal, Wide1, Wide2, Zoom1, and Zoom2.
A Normal mode is also available for displaying of normal-size (4:3 aspect ratio) pictures.
•The display has a Compose mode to switch screen size automatically depending on the contents of software.
•Three different screen sizes in RGB input mode (Normal, Wide, and Zoom) are also available.
Picture quality
•Pro-setting allows adjustment for even higher picture quality.
•Noise reduction function reduces noise to ensure clear pictures.
•A display suitable for such film materials as movie pictures can be made by 24 frame mode function.
Convenient power saving setting
•When no video signal is input to the display or the remote control is not operated for a long time, this function automatically reduces
the power consumption of the unit.
Others
•The white screen and screen orbiter functions are available to minimize phosphor burn-in.
•3 audio input terminals and 20 W + 20 W (42”)/12 W + 12 W (50”) external speaker output terminal are available.
* The HDCP (High-bandwidth Digital Content Protection) function ensures that high-vision digital contents (movies, etc.) provided with
copy-guard protection can be displayed on the plasma display.

&17)&07	@
03.1.16, 11:27 Page 4EPCF
1BHF.BLFS
+11$
 
						

							E-5
English
ACCESSORIES
Information
Cables for connecting the display to external equipment are not supplied.  Contact your dealer for more information on these products.
CHECKING ACCESSORIES
HANDY TIPS
•Viewing the screen constantly for extended periods can strain your eyes.  Be sure to stay at a proper distance (at least 1.5 m or 5 feet
(42”)/1.9 m or 6.3 feet (50”)) from the screen and to look occasionally away while working.
•Have the display inspected and cleaned by your dealer at regular intervals.
•Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods.  To ensure that the display has a
prolonged service life, be sure to use a screen orbiter, white screen.  This will ensure the same picture or pattern is not constantly
displayed for long periods.  (See P. E-39–E-40.)
•The plasma display panel, which is built for maximum precision, provides more than 99.99% effective pixels.  You may find, however,
that some pixels constantly remain lit or dimmed.
•The display has a fan to prevent its internal temperature from rising.
•Be careful with the air delivered by the fan.  It may be very hot.
•Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.
You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote
control does not function properly.
•Pictures may not be displayed properly if you connect a non-standard PC to the RGB input terminal.  In this case, contact your dealer
for more information.
•The protective circuit, built into the display, automatically turns off the power if the display has a problem.  In this case, you will see
that the power indicator lamp flashes red.
Warning
If the power indicator lamp flashes red, this signifies that the display has developed a problem.  When this happens, be sure to remove the
power plug from the receptacle to prevent fire or electric shock.  Then, check the display in accordance with the instructions given on
P. E-47, or contact your dealer.
Manual
One remote
controlTwo AA batteries One user’s
manualOne power cableTwo big ferrite
coresTwo small ferrite
cores

&17)&07	@
03.1.16, 11:27 Page 5EPCF
1BHF.BLFS
+11$
 
						

							E-6
INSTALLATION
To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location.
Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display.  Also, be also sure that your dealer
performs the installation.
See the appropriate instruction manual for more information on the installation hardware you select.
To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.
To ensure proper heat radiation, provide at least as much space around the display as shown below.
* Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.
* Never attempt to tilt the display sideways or backward.
* To prevent the power and other cables from being accidentally pulled, make sure that they run along the wall or through corners.
* The display can be installed with either of its sides facing down.
FrontSide
(cm) (cm)Upper
Left
Lower10
10
510
Right
Note
The display is a highly precise piece of equipment and therefore must be packed properly before transportation.  Be sure to use only those packing
materials originally supplied with the display when repacking it.
Reference
See P. E-42 for more information on options.
4
Wall

&17)&07	@
03.1.16, 11:27 Page 6EPCF
1BHF.BLFS
+11$
 
						

							E-7
English
PART NAMES AND FUNCTIONS
‹
ƒ
„
DISPLAY SECTION – FRONT
1Power indicator lamp
This lamp shows the state of the power supply.
Lit (red): Stand-by
Lit (green): Power ON
Lit (orange): Power saving (DPMS: Power saving
function) mode ON (See P. E-38.)
Flashing (red): Malfunction (Flashes differently depending
on the type of malfunction.  See P. E-47 for
more information.)
2Remote control signal receiver
Receives signals from the remote control.
3Input mode selector button 
 [MODE]
4Input mode selector button 
 [MODE]
Switches between picture input modes.
5VOL + button
6VOL – button
Adjusts the sound volume.
7Wide screen selector button [WIDE]
Switches the screen over to a desired wide screen.
8ON/OFF button
Turns the power “ON” and “OFF (standby state)”.
Warning
If the power indicator lamp flashes red, this signifies that the display has developed a problem.  When this happens, be sure to remove the
power plug from the receptacle and contact your dealer.  Leaving the display power ON can result in fire or electric shock.
(Right section)
Control Panel (Right side of display)

&17)&07	@
03.1.16, 11:49 Page 7EPCF
1BHF.BLFS
+11$
 
						

							E-8
PART NAMES AND FUNCTIONS (Continued)
DISPLAY SECTION – LOWER PART
1/I power switch
When pressed while in the “OFF” state, the power indicator lamp lights and the display is placed in the “ON ” state, and the power can be turned
“ON” or “OFF” by the remote control or on the control panel of the display. When pressed while in the “ON ” state, the power indicator lamp goes
out and the display is placed in the “OFF” state where power is still partly supplied.
2RS-232C terminal (RS-232C)
This terminal is provided for you to control the display from the PC.  Connect it to the RS-232C terminal on the PC.
When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)
3RGB1 input terminal (RGB1 INPUT/DVI-D)
Connect this terminal to the PC’s display (digital RGB) output terminal.
*The connection cable No.88741-8000 made by molex Inc. is recommanded.
4RGB2 input terminal (RGB2 INPUT/mD-sub)
Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.
5Power input terminal
Connect this terminal to the power cable supplied with the display.
When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)
6External speaker output terminal (EXT SP)
Connect this terminal to the optionally available speaker.
When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)
*See the speaker instruction manual for more information.
7Audio3 input terminal (AUDIO3 INPUT)
8Audio2 input terminal (AUDIO2 INPUT)
9Audio1 input terminal (AUDIO1 INPUT)
Connect this terminal to the sound output terminal of your VCR, etc. (See P.E-38 for the selection of audio input for video input.)
Bottom (P42VHA10 type)
Bottom (P42HHA10 type)
Bottom (50”)
Videoboard
P-TE1000E type P-TE1010E type
Bottom (P42VHA20 type)

&17)&07	@
03.1.16, 11:49 Page 8EPCF
1BHF.BLFS
+11$
 
						

							E-9
English
Description of Input Terminals
RS-232C terminal (RS-232C)
0+A RGB3 input terminal (RGB3 INPUT/BNC)
Connect this terminal to the PCs display (analog RGB) output terminal or decoder (digital broadcast tuner,etc.) output terminal.
*When RGB3 input terminal is connected, Comp.video mode is not available. (See P. E-36.)
AComponent video input terminal (VIDEO4 INPUT)
Connect this terminal to the component video output (colour difference output) terminal of your HDTV unit or DVD player.
*When Comp.video input terminal is connected, RGB3 mode is not available. (See P. E-36.)
BRGB3 synchronization switch (SYNC SW TTL/ANALOG (75 Ω))
This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB3 input terminals, with 75 Ω.
 TTL : Does not terminate. ANALOG (75 Ω): Terminates.
CVideo1 input terminal (VIDEO1 INPUT/P-TE1000E)
Connect this terminal to the SCART terminal of your VCR or DVD, etc.
*See “SETTING THE INPUT TERMINALS” on E-35.
DS-Video input terminal (VIDEO2 INPUT/P-TE1010E)
Connect this terminal to the S-video output terminal of your VCR.
EVideo input terminal (VIDEO1 INPUT/P-TE1010E)
Connect this terminal to the video output terminal of your VCR.
FComponent video input terminal (VIDEO3 INPUT/P-TE1010E)
Connect this terminal to the component video output (colour difference output) terminal of your HDTV unit or DVD player.
Pin No. Signal
1 DCD (Data Carrier Detect)
2 RD (Received Data)
3 TD (Transmit Data)
4 DTR (Data Terminal ready)
5 GND (Ground)
6 DSR (Data Set Ready)
7 RTS (Request To send)
8 CTS (Clear To Send)
9 RI (Ring Indication)
DVI-D terminal  (RGB1 INPUT/DVI-D)
RGB2 input terminal (RGB2 INPUT/mD-sub)Pin No. Input signal Pin No. Input signal
1 Red 9 —
2 Green 10 Ground
3 Blue 11 —
4— 12—
5 Ground 13 Horizontal synchronization
6 Ground 14 Vertical synchronization
7 Ground 15 —
8 Ground Frame Ground
2 6 10 14 18
3 7 11 15 194 8 12 16 20
1 5 9 13 17 21
SCART terminalPin No.Input Signal
1—
2 Right audio
3—
4Audio ground
5 Blue ground
6 Left audio
7 Blue
Pin No.Input Signal
8—
9Green ground
10 —
11 Green
12 —
13 Red ground
14 —
Pin No.Input Signal
15Red/chrominance
16 —
17 —
18Composite video ground
19 —
20Composite video/Y
21 Ground

&17)&07	@
03.1.16, 11:49 Page 9EPCF
1BHF.BLFS
+11$
 
						

							E-10
PART NAMES AND FUNCTIONS (Continued)
REMOTE CONTROL
For details, see page .
1
 button 
Switches between power ON and standby
state.
3DISPLAY OFF button 
For showing on-screen-information.
4PICTURE MODE button 
Switches the picture mode.
7RGB input mode selector button
[RGB 1 – 3] 
Selects RGB 1 – 3.
9Video input mode selector button
[VIDEO 1 – 3] 
Selects VIDEO  1 – 3.
AMenu button [MENU] 
 – 
Use this button to display a desired menu
for adjusting the picture.
BEnter button [ENTER] 
 – 
Press this button to finalize the selection of
a desired menu or option within a menu.2MUTE button 
Temporarily mutes the sound.
5PICTURE MEMORY button 
Recalls the PICTURE MEMORY.
6WIDE button 
Switches the screen over to a desired wide
screen.
8RGB3/VIDEO4 input mode selector
button [RGB3/VIDEO4] 
Selects RGB3 or VIDEO4.
0Volume adjustment buttons
[VOL +/– ] 
Adjust the volume.
Press the + button to increase the volume.
Press the – button to reduce the volume.
CAdjustment buttons [ 
 /  /  /  ]
 – 
Use these buttons to scroll through options
in a menu.

&17)&07	@
03.1.16, 11:49 Page 10EPCF
1BHF.BLFS
+11$