Fujitsu P42vha20 Users Manual

							English
E-21
OTHER BASIC OPERATIONS
CONVENIENT FUNCTIONS
On-screen information (DISPLAY)
Press  .
The mode is indicated on the screen for 5 seconds.
Picture Mode (PICTURE MODE)
Press .
This button can be used to switch the picture mode.
In the picture mode, you can switch between the set status and the fine mode.
* For the picture mode settings, see “Setting Picture Mode (P. E-26)”.
Picture Memory (PICTURE MEMORY)
Press.
This button can be used to recall the settings of the picture memories 1 – 8. Each time this button is
pressed, the setting changes as follows.

&17)&07	@
03.1.16, 11:52 Page 21EPCF
1BHF.BLFS
+11$
 
						

							E-22
WATCHING PICTURES ON THE WIDE SCREEN
Note
•Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in.
•A variety of picture modes are available with this display.  Remember that if you select a mode with an aspect ratio (ratio of frame width to frame
height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same
aspect ratio.
• Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making
purposes or for a public audience may constitute a copyright infringement.
For films, try to select a mode having the same aspect ratio as the original picture; this enables the director’s original intentions to be preserved.
Reference
See P. E-28–E-29 for how to adjust the picture size and position.
1
2
* You can also use the buttons
on the display’s control
panel to perform these steps.
SWITCHING BETWEEN SCREEN SIZES
Normal mode
Wide1 mode
Press .
The currently selected mode will appear.
Press  to select a desired
picture mode.
Each time you press , a different picture mode
appears.  The sequences used are as follows:
When you are in a Video or S-video input mode
When you are in a Comp.video input mode
When you are in an RGB input mode
* Depending on the type of signal, some aspects
may not be selected.

&17)&07	@
03.1.16, 11:52 Page 22EPCF
1BHF.BLFS
+11$
 
						

							E-23
English
Information
You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema
Vision size i.e., the sizes used frequently for picture software.
SCREEN SIZE
ASPECT RATIO
The following aspect ratios are available.
16:9 aspect ratio
(HDTV broadcasting) 4:3 aspect ratio
(VHF/UHF broadcasting, BS broadcasting)
1.85:1 aspect ratio
(Vista Vision  size)2.35:1 aspect ratio
(Cinema Vision size)
4
3
16
9
1.85
1
2.35
1
Normal
Displays pictures of normal size (i.e., a 4:3 aspect ratio).
Compose
The screen size changes automatically in accordance with the contents of image software
you use.
Wide1
Displays natural-looking pictures of standard size on the wide screen.
Wide2/Wide
Ideal for displaying vertically extended pictures such as squeezed pictures and recorded
HDTV programs.
Zoom1/Zoom
Enlarges horizontally extended pictures equally in all directions to maintain the aspect
ratio constant.
Zoom2
Reduces the height of horizontally extended pictures with captions, without eliminating
the caption.  Only the height of pictures is reduced, not the height of the caption.
(Captions may not be easy to read, however, depending on the picture.)
Picture of
standard sizeWide1
Vertically
extended pictureWide2
Horizontally
extended pictureZoom1
Horizontally extended
picture with captionZoom2

&17)&07	@
03.1.16, 11:52 Page 23EPCF
1BHF.BLFS
+11$
 
						

							E-24
ADJUSTMENT MENU
ADJUSTMENT MENU
MENU
PICTURE
POSITION/SIZE
AUDIO
FEATURES
FACTORY DEFAULT
Contrast
Brightness
Colour
Tint
Sharpness
Picture Mode
PrecisionSetting
Noise Reduction *
Picture Memory
Luminance
Black Level
Colour Temp.
User Colour Temp.
Position
Size
Treble
Bass
Balance
Loudness
Adjustment
Function
On Screen Menu
Input Terminal
OthersDot Clock
Clock Phase
Clamp Position
Auto Calibration
24 Frame Mode
OSD
Language
Name Select
Video Input
BNC Input
D-SUB Input
DVI Input
DPMS
Audio Input
Screen Orbiter
Direct Setting
Code Setting
White Screen
Exhibition Mode
Information
*: for other than RGB
for RGB2, RGB3
for RGB2, RGB3
for RGB2, RGB3, Comp. video
for RGB2, RGB3
for Video
with P-TE1000E
Video Input
S-video Input
BNC Input
D-SUB Input
DVI Input
with P-TE1010E
for RGB2, RGB3 for RGB for other than RGB1
for RGB
Can be set when Fine is
selected as the Picture Mode.

&17)&07	@
03.1.16, 11:52 Page 24EPCF
1BHF.BLFS
+11$
 
						

							E-25
English
ADJUSTING PICTURES (PICTURE MENU)
BASIC OPERATIONS [EX.: ADJUSTING TINT (Tint)]
“PICTURE” selected in the main menu
screen (Video Input Mode)
“Tint” selected in the PICTURE Menu
screen (Video Input Mode)
You can make changes to all picture adjustment options in the PICTURE Menu.
The changes you make will be stored for a selected input mode.  Therefore, you need to select a desired input mode before making any
changes.
“Tint” adjustment screen
PICTURE  POSITION/SIZE  AUDIO  FEATURES  FACTORY DEFAULT
1
2
Press .
The main menu screen will appear.
Press  or  to select
“PICTURE”.
Each time you press  or , one of the available
menus appears in the following sequence:
The PICTURE Menu screen will appear.
Press  or  to select
“Tint”.
Press 
 .
The “Tint” adjustment screen will appear.
Press  or  to change tint
values.
 : More greenish colours
 : More purplish colours
Press  to store.
Press 
  when you finish.
* Repeat steps 3, 4, 5 and 6 when you wish to
make changes to other options.
* When 
 is pressed after you have selected
“Default”, the settings are returned to those that
were valid when you purchased the set.
3
4
5
6
* On-screen information disappears if you do not take any action for about 60 seconds.

&17)&07	@
03.1.16, 11:53 Page 25EPCF
1BHF.BLFS
+11$
 
						

							E-26
ADJUSTING PICTURES (PICTURE MENU) (Continued)
•Contrast, brightness, colour darkness, tint, and picture sharpness are adjusted as shown in the following chart.
Select the item with 
 , and then adjust with  . Finally, press  to implement the adjustments.
•Setting Picture Mode (Picture Mode)
Can set up the picture mode.
Each time you press 
 or , one of the available choices appears in the following sequence:
Dinamic: Suitable for watching a normal motion picture. (Standard)
Fine: Suitable for watching a dark picture such as movie.
Real 1: Makes a strong contrast picture.
Real 2: Makes a bright colour picture.
Static: Suitable for watching a still picture.
Press 
 to store.
*Select Dinamic, Fine, Real 1, Real 2 or Static to suit your taste.
•Precision Setting (for more advanced adjustment)
Luminance, Black Level, Colour Temperature, and User Colour Temperature are adjusted as shown
in the following chart.
Select the item with 
 , and then adjust with  . Finally, press  to implement the
adjustments.
Adjustment ItemAdjustment Range/Remarks
Contrast Lower contrast Higher contrast–30 to +30
Brightness Darker screen Brighter screen–60 to +60
Colour Lighter colours Darker colours–60 to +60
Tint More purplish colours More greenish colours–60 to +60 (RGB, Comp. video)
–30 to +30 (Video, S-video)
Sharpness Softer pictures Sharper pictures–4 to +4 (RGB)
–16 to +16 (other than RGB)
Adjustment Item Contents of Adjustments OperationAdjustment Range/Remarks
40 to 100%
–15 to +15
–3500 to +3500
0 to 255 Luminance
Black Level
Colour Temperature
User Colour
TemperatureAdjusts the luminance level.
(when the Picture Mode is Fine)
Adjusts the picture when watching a dark
image. (when the Picture Mode is Fine)
Set to low to obtain a warm atmosphere,
and set to high to obtain a cold atmosphere.
Enables individual adjustment of Red,
Green and Blue.Use 
  to adjust.
Use   to adjust.
Use   to adjust.
Use   to select, and use   to
adjust.

&17)&07	@
03.1.16, 11:54 Page 26EPCF
1BHF.BLFS
+11$
 
						

							E-27
English
• Setting Noise Reduction (Noise Reduction)
Can select the noise reduction setting corresponding to the noise level of the input signal.
Each time you press 
 or  ,one of the available choices appears in the following sequence:
Off: Noise reduction does not function.
Min.: Weak setting
Std.: Standard setting
Max.: Strong setting
Press 
 to store.
* Some type of signal can not be selected.
• Storing the setting of PICTURE (Picture Memory)
Stores 8 patterns of adjustments set by PICTURE.
Read out and store to suit your taste.
In case of “Load”
When setting “Load”: Read out your desired Setting.
(1) Select “Picture Memory” and press 
.
The “Picture Memory” screen will appear.
(2) Press 
 or  to select Load.
(3) Select Data number to make Load.
(4) Press 
 to read out.
In case of “Save”
When setting “Save”: Set to suit your taste and store.
(1) Select “Picture Memory” and press 
.
The “Picture Memory” screen will appear.
(2) Press 
 or  to select Save.
(3) Select Data number to make Save.
(4) Press 
 to save.“Picture Memory” selection screen
“Load” selection screen
* On-screen information disappears if you do not take any action for about 60 seconds.

&17)&07	@
03.1.16, 11:54 Page 27EPCF
1BHF.BLFS
+11$
 
						

							E-28
ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU)
BASIC OPERATION [EX. : ADJUSTING HORIZONTAL DIRECTION OF SCREEN POSITION]
“POSITION/SIZE” selected from the main
menu screen
You can make changes to all screen adjustment options in the POSITION/SIZE Menu.
The changes you make will be stored for the selected input mode.  Therefore, you need to select a desired input mode before making any
changes.
“Position” adjustment screen
PICTURE  POSITION/SIZE  AUDIO  FEATURES  FACTORY DEFAULT
1
2
3
4
5
6
Press .
The main menu screen will appear.
Press  or  to select
“POSITION/SIZE”.
Each time you press  or , one of the available
menus appears in the following sequence:
The POSITION/SIZE Menu screen will appear.
Press  or  to select
“Position”.
Press 
 .
The “Position” adjustment screen will appear.
Press , ,  or  to
change position values.
 : Moves screen up.
 : Moves screen down.
 : Moves screen to the right.
 : Moves screen to the left.
Press  to store.
Press 
  when you finish.
* Repeat steps 3 to 6 when you wish to make
changes to other options.
* When 
 is pressed after you have selected
“Default”, the settings are returned to those that
were valid when you purchased the set.

&17)&07	@
03.1.16, 11:54 Page 28EPCF
1BHF.BLFS
+11$
 
						

							E-29
English
Adjusting Screen Position (Position)
Horizontal position (Horizontal)
 : Moves screen to the right.
 : Moves screen to the left.
Vertical position (Vertical)
 : Moves screen up.
 : Moves screen down.
Press  to store.
Adjusting Screen Size (Size)
Screen width (Width)
 : Increases width.
 : Reduces width.
Screen height (Height)
 : Increases height.
 : Reduces height.
Press  to store.
*You cannot adjust screen size in RGB1 (DVI-D) mode.
Setting Range
* Depending on the input signal, the adjustment range may differ.
* On-screen information disappears if you do not take any action for about 60 seconds.“Position” adjustment screen
“Size” adjustment screen
Comp.video mode
-16 to +16
-2 to +16 (P42HHA10)
-4 to +20 (P42VHA10/20)
-4 to +16 (P50XHA10)
RGB mode
-150 to +150
-12 to +25 (P42HHA10)
-25 to +50 (P42VHA10/P50XHA10/
P42VHA20)
Position
Size
Video, S-video mode
Horizontal: -30 to +30
Vertical
Zoom: -15 to +15
Others: -7 to +7
-3 to +12 (P42HHA10)
-7 to +16 (P42VHA10/20)
-3 to +12 (P50XHA10)
→
→
→
→
→
→
→
→

&17)&07	@
03.1.16, 11:55 Page 29EPCF
1BHF.BLFS
+11$
 
						

							E-30
BASIC OPERATION [EX.: ADJUSTING VOLUME BALANCE (Balance)]
ADJUSTING AUDIO (AUDIO MENU)
“AUDIO” selected in the main menu screen
“Balance” selected in the AUDIO Menu
screen
You can make changes to all sound adjustment options in the AUDIO Menu.
The changes you make will be stored for the selected input mode.  Therefore, you need to select a desired input mode before making any
changes.
Press .
The main menu screen will appear.
Press  or  to select “AUDIO”.
Each time you press  or , one of the available
menus appears in the following sequence:
The AUDIO Menu screen will appear.
Press  or  to select
“Balance”.
Press 
 .
The “Balance” adjustment screen will appear.
Press  or  to adjust the
balance.
 : Higher volume from the right-hand speaker
 : Higher volume from the left-hand speaker
Press  to store.
Press 
  when you finish.
* Repeat steps 3 to 6 when you wish to make
changes to other options.
* Audio Input menu will not be displayed when
“No Audio” is selected. (See P. E-38.)
1
2
3
4
5
6
PICTURE  POSITION/SIZE  AUDIO  FEATURES  FACTORY DEFAULT

&17)&07	@
03.1.16, 11:55 Page 30EPCF
1BHF.BLFS
+11$