Fujitsu P42vha20 Users Manual

E-31
English
* On-screen information disappears if you do not take any action for about 60 seconds.
Adjusting Treble (Treble)
Any value between -6 and +6 can be selected.
 : Stronger treble
 : Weaker treble
Adjusting Bass (Bass)
Any value between -6 and +6 can be selected.
 : Stronger bass
 : Weaker bass
Adjusting Volume Balance (Balance)
Any value between -10 and +10 can be selected.
 : Higher volume from the right-hand speaker
 : Higher volume from the left-hand speaker
Setting Loudness (Loudness)...

E-32
OTHER ADJUSTMENTS (FEATURES MENU)
BASIC OPERATION [EX. : SELECTING LANGUAGE (Language)]
You can make the following changes  in the FEATURES Menu.
“FEATURES” selected in the main menu
screen
On Screen Menu screen
“Language” selection screen
PICTURE  POSITION/SIZE  AUDIO  FEATURES  FACTORY DEFAULT
1
2
3
4
5
6
7
8
Press .
The main menu screen will appear.
Press  or  to select
“FEATURES”.
Each time you press  or , one of the available
menus appears in the following sequence:
The FEATURES Menu screen...

English
E-33
• FEATURES setup screen has the following 5 options.
Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.
Function : Allows setting of 24-frame mode. (See P. E-34.)
On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-34.)
Input Terminal : Can make an input terminal setting such as Video Input. (See P. E-35 – E-37.)
Others : Can make other settings. (See P. E-38 – E-40.)
ADJUSTMENT
Dot Clock, Clock Phase, Clamp Position, and Auto...

E-34
OTHER ADJUSTMENTS (FEATURES MENU) (Continued)
• Setting Display Information (OSD)
You can use this option to select whether to display information other than menus.  (Error messages
are displayed regardless of what choice you make for this option.)
Each time you press 
 or , one of the available choices appears in the following sequence:
On (OSD: bright): On-screen information shown in light colour.
On (OSD: dark): On-screen information shown in dark colour.
Off: Except for menus and error messages,...

English
E-35
* On-screen information disappears if you do not take any action for about 60 seconds.
SETTING THE INPUT TERMINALS
•Video Input (when the P-TE1000E is installed)
Function
Select the video input format.
Each time 
  is pressed, the setting is switched.
Select the desired input.
Press 
 to store.
Video Format
You can use this option to select the desired video mode of pictures it will receive to the Video Input terminal.
Each time you press 
 or , one of the available modes appears in the...

E-36
•Video Input (when the P-TE1010E is installed)
You can use this option to select the desired video mode of pictures it will receive to the Video Input terminal.
Each time you press 
 or , one of the available modes appears in the following sequence:
Auto1: Automatically selects NTSC, PAL and SECAM.
Auto2: Automatically selects NTSC and M-PAL.
Other than Auto: You need to select a system appropriate to the input signal.
Press 
 to store.
•S-video Input (when the P-TE1010E is installed)
You can use...

English
E-37
•D-SUB Input
You can use this option to select the signal system it will receive to D-SUB Input terminal.
(1) Select D-SUB Input and press 
.
D-SUB Input screen appears.
(2) Select the signal system to receive.
Each time you press 
 or , one of the available choices appears in the following sequence:
RGB-PC
 Decoder
RGB-PC: For using RGB for PC.
Decoder: For using digital broadcast tuner.
(3) Press 
 or  to select Mask.
(4) Select Decoder by FUNCTION to set up Mask.
Each time you press 
 or...

E-38
OTHER ADJUSTMENTS (FEATURES MENU) (Continued)
OTHER SETTINGS
DPMS for other than RGB1
You can use this option to select the amount of time before the DPMS function starts.
DPMS (which stands for “display power management signaling”) allows the display to maintain an
automatic power saving function.
This function causes on-screen information to disappear until the next input operation, if the power
is ON and the display has not received any signals for the predetermined period of time.  When
DPMS is...

English
E-39
•Minimizing phosphor burn-in (Screen Orbiter) for RGB
You can use this option to move the screen position to minimize phosphor-induced “burn-in”.
Follow the steps below.
(1) Select “Screen Orbiter” and press 
.
The “Screen Orbiter” setting screen will appear.
(2) Press 
 or  to select “Mode/Time”.
(3) Select a desired pattern.
Each time you press 
 or , one of the available choices appears in the following sequence:
Off: Disables Screen Orbiter.
Time: Moves the pattern approximately every...

E-40
* On-screen information disappears if you do not take any action for about 60 seconds.
•Specifying RGB Input Signal (Code Setting) for RGB2, RGB3
You can use this option to specify and display the type of RGB input signal by code number.
Each time you press 
 or , one of the available choices appears in the following
sequence:
     Auto 
 Manual
Auto: Automatically displays the input signal to the optimum.
Manual: Selects RGB code number.
Press 
 to store.
* In Auto mode, the optimum resolution may...