Fujitsu Myrica P42 2 User Manual

							  MYRICA P42-1A / P42-2 / P50-2 
A26361-K1040-Z120-1-M119, edition 3  English - 19 
Deleting program 
►  Select the programme you want to delete with the buttons  / . 
►   Press the ERASE button (red). The selected pr ogramme is deleted from the programme list. 
Selecting signal source 
Selecting signal source for main display 
►  Press the SOURCE button in the upper section of the remote control. 
►   Choose the signal source  you require using the 
 button. 
►   Press the MENU button to activate your selection. 
Selecting signal source for PIP display  
►   Press the ON/OFF button to activate the PIP mode. 
►   Press the SOURCE button in the lower section of the remote control (in the PIP field). 
►   Choose the signal source  you require using the 
 button. 
►   Press the MENU button to activate your selection. 
Changing programme 
► Press the  button to change to the next programme in the programme list. 
►  Press the 
 button to change to the previous programme in the programme list. 
 
						

							MYRICA P42-1A / P42-2 / P50-2 
20 - English A26361-K1040-Z120-1-M119, edition 3 
Operation 
Controls are provided on the device and the remote control for operating the plasma TV. 
Operating elements on the device 
The operating controls of the plasma TV are located in the underside of the device. With these 
buttons you can operate the basic  functions of the plasma TV. 
  1 =  INPUT SELECT button (SOURCE) 
for selecting the video input source 
2 =  VOLUME buttons (volume) 
The VOLUME  S button opens the menu for 
setting the volume. 
With the VOLUME  T button you can 
change the programme in the TV mode.  3 =  ON/OFF switch for the standby mode 
4 =  Indicator 
5 =  Infrared receiver 
 
 
						

							  MYRICA P42-1A / P42-2 / P50-2 
A26361-K1040-Z120-1-M119, edition 3  English - 21 
Changing the device settings with the buttons of the control 
panel 
With the buttons on the control panel, you can make the following settings directly: 
Selecting picture signal source 
►   Press the INPUT SELECT button. A list  of the signal sources is displayed. 
►   Choose the signal source y ou require using the VOLUME  S/T  buttons.  
►   Press the INPUT SELECT button to activate the signal source. 
Adjusting the volume 
►   Press the VOLUME  S button to open the volume menu. 
►   Set the volume as required with the VOLUME  S/T  buttons.  
The volume menu automatically disappears again after a short time. 
Changing programme 
►   Press the VOLUME  T button to prepare changing. 
►   Change to the next or previous programme  in the programme list with the buttons 
VOLUME  S/T . 
 
						

							MYRICA P42-1A / P42-2 / P50-2 
22 - English A26361-K1040-Z120-1-M119, edition 3 
Remote control 
1
23
4
5 6
7
8 9
11
13 14 12
10
15
18 16
17 19
20
   1
 = POWER - switches the device on or into 
the standby mode. 
 2  = INFO - information 
You display the current settings with this 
button. 
  3  = MUTE - switches the sound on and off. 
  4  = PICTURE 
With this button you select the picture mode. 
  5  = V.SIZE 
With this button you select the picture format. 
  6  = SOURCE 
With this button you select the signal source. 
  7  = SOUND 
With this function you activate the sound 
mode. 
  8  = S.MODE - You select the audio channel 
with this button. 
  9  = STILL 
With this button you stop the displayed picture 
(still image) or switch back into the normal 
playback mode again. 
10  = DIGEST - With this button you display 
the programme overview of all channels. 
11  = Pre.PR - Changes back to the 
programme previously set 
12  = SLEEP - Sleep timer 
By pressing this button several times, you set 
the time after which the device is 
automatically switched off.  
13  = TEXT - Switches Teletext on or off 
14  = EXIT - Closes the submenu or the OSD 
menu 
15  = PR  S - Changes the main display to the 
next programme in the programme list 
16  = MENU - Opens the OSD menu 
17  = VOL  W - Decrease volume 
18  = VOL  X - Increase volume 
19  = PR  T - Changes the main display to the 
previous programme in the programme list 
20  = 0 - 9 
With this button you select the programme 
directly. 
 
 
						

							  MYRICA P42-1A / P42-2 / P50-2 
A26361-K1040-Z120-1-M119, edition 3  English - 23 
Teletext 
With button 13 you switch Teletext on or off. 
With the buttons  21, 23 , 24  and  25 you 
navigate in the Teletext function. 
Buttons for editing programme 
list 
The detailed description of editing the 
programme list is pr ovided under Adjusting 
programme settings. 
21  = ERASE (red) - Deletes the selected 
programme from the programme list 
23  = SKIP (green) - The marked programme 
is skipped when changing programmes with 
the buttons PR  S and PR  T 
24  = INSERT (yellow) - Moves programme 
see Arranging programmes 
25  = REPLACE (blue) - Exchanges 
programmes, see Arranging programmes  
 
22 = FAVORITE - Switches over to the 
programme set as a favourite.  
26  = No function 
 
22
23
24 21
26
27 25
29
28
33
34 32
31 30
13
 
PIP (Picture in Picture)
 
27 = ON/OFF - Activates the PIP mode  
28  = SOURCE 
Press this button to select the signal source 
for the PIP mode. 
29  = SIZE 
Press this button to select the picture format 
for the PIP mode. 
30  = POSITION 
Press this button to change the position of the 
PIP window.  
31  = SWAP - The displays of the main and the 
PIP window are exchanged.  
32  = PR+ - Changes to the next programme of 
the programme list in the PIP window 
33  = PR- - Changes to the previous 
programme of the programme list in the PIP 
window 
34  = POP - Main display and PIP window are 
shown in the same size next to each other 
 
						

							MYRICA P42-1A / P42-2 / P50-2 
24 - English A26361-K1040-Z120-1-M119, edition 3 
Changing device settings with remote control 
You can open and operate the integrated OSD (On Screen Display) menu with the remote control. 
To set the OSD menu, perform the following steps: 
►  Press the MENU button to open the OSD menu. 
►   Mark the desired menu item with the 
 /  buttons. 
►   Press the MENU button to activate a menu item. 
In the individual menus, the butt ons available to you in each case are shown in the footer. 
►   Mark the option you want to change. 
►   Set the desired value or activate the desired function. 
►   Press the EXIT button to return to the main menu from a submenu or to ex\
it the OSD menu. 
All changes are stored automatically. 
Description of menus 
i  The OSD menu is available in different 
languages. The English menu names are used in 
the following description (default setting). 
Different menus and different options are  available to you depending on the set signal 
source. The menus and options not avail able are not shown in the OSD menu. 
 The following main menus are available to you in the OSD menu: 
 Image 
Here you set the picture mode, the colour temperature and the picture format. \
 Sound 
Here you set the sound of your plasma TV. 
 Tools 
Here you set the advanced settings (transparenc
y of the OSD menu, picture in picture 
mode, child lock etc.). 
  Time 
Here you set the various time functions. 
 TV 
Here you start the automatic programme s
earch and adjust the programme settings to 
meet your needs. 
 
						

							  MYRICA P42-1A / P42-2 / P50-2 
A26361-K1040-Z120-1-M119, edition 3  English - 25 
PICTURE menu - picture settings 
►  Press the MENU button to open the OSD menu. 
►  Mark the  PICTURE menu item with the 
 /  buttons. 
►   Press the MENU button to activate the menu item. 
The buttons available to you for setting t he options are shown in the menu footer. 
  Mode With this function you set the picture mode. 
The contrast, brightness, colour and focus of the picture are set to opt\
imum 
values depending on the picture mode. 
Possible values: Standard, Vivid , Mild , User . 
Temperature  With this button you set the colour temperature. 
Possible values: Cool2, Cool1 , Normal , Warm1 , Warm2 . 
Video NR  With this function you switch the pict ure correction (Noise Reduction) on or 
off. 
Possible values:  On, Off  
Screen form  With this function you set the picture format. 
Possible values: 16:9, PANORAMA , ZOOM1 , ZOOM2 , 4:3 . 
With these functions you set the pos ition and the synchronisation of the 
picture display. 
To set the picture display, first use the  Auto function and correct the picture 
display and, if necessary, then with the other functions. 
These functions are  only available when PC is selected as the signal 
source. 
H Position  With this function you set the horizontal picture 
position. 
V Position With this function you set t he vertical picture position. 
Phase With this function you fine-tune your display to 
eliminate picture interference.  
Geometry 
(in PC mode only) 
Auto With this function you optimally set the picture display 
automatically. 
 
 
						

							MYRICA P42-1A / P42-2 / P50-2 
26 - English A26361-K1040-Z120-1-M119, edition 3 
SOUND menu - sound settings 
►  Press the MENU button to open the OSD menu. 
►  Mark the  SOUND menu item with the 
 /  buttons. 
►   Press the MENU button to activate the menu item. 
The buttons available to you for setting t he options are shown in the menu footer. 
  Balance With this function you set the balance between the left and the right 
loudspeaker. 
Sound-Mode With this function you activate the sound mode. 
The bass level and frequency of the sound are automatically set to 
optimum values depending on the sound mode. 
Possible values: Standard, Movie , Music , User . 
Spatial Effect  With this function you switch the Surround sound mode on or off. 
Possible values: On, Off  
AVC  (Automatic Volume Control) 
With this function you switch the automatic volume control on or off. 
Possible values: On, Off  
INTERNAL  With this function you change from the  internal loudspeakers to the external 
ones and vice versa. 
Possible values:  On, Off  
MTS  (Multi Tone System) 
With this function you set the audio channel. 
Possible values: Mono, Stereo , Language A , Language B , Language AB . 
 
 
						

							  MYRICA P42-1A / P42-2 / P50-2 
A26361-K1040-Z120-1-M119, edition 3  English - 27 
SETUP menu - advanced settings 
►  Press the MENU button to open the OSD menu. 
►  Mark the  SETUP menu item with the 
 /  buttons. 
►   Press the MENU button to activate the menu item. 
The buttons available to you for setting t he options are shown in the menu footer. 
  Translucent With this function you set t he transparency of the OSD menu 
Possible values:  Off, 1 - 7  
(Picture In Picture) 
With this function you switch the PIP mode on or off. 
Possible values:  On, Off 
When the PIP mode is activated, t he following options are available: 
Size Here you set the picture format for the PIP display. 
Resource Here you set which signal source is displayed in the 
PIP display. 
Picture Swap With this function you ex change the signal sources of 
the main display and the PIP display. 
Position  Here you set the position of the PIP display. 
PIP 
A description of the PIP mode is also  provided under PIP mode (Picture in 
Picture) and Selecting signal  source for PIP display. 
 
						

							MYRICA P42-1A / P42-2 / P50-2 
28 - English A26361-K1040-Z120-1-M119, edition 3 
 Here you configure the advanced settings. 
ID Here you set an ID number for service purposes. 
Possible values: 0 - 99 
Burn Protect  With this function you can partially prevent still 
images from burning in. 
Possible values: On, Off 
Warning: 
Avoid still images on the screen for longer periods, 
e.g. still images from videos, sender label etc. 
(maximum of 1 hour).  
Burn Clear  With this function you can regenerate burned-in 
areas of the screen in some cases. 
Possible values: On, Off  
Blue Back  With this function the screen background is shown in 
blue when there is no input signal. 
Possible values: On, Off  
Language  With this function you set the language of the OSD 
menu. 
Possible values: English, German , French , Spanish , 
Italian , Portuguese  *), Dutch  *) 
*) not with MYRICA P42-1A 
Advanced 
Setting the child lock With this function you switch the child lock on or off. 
When the child lock is activated, it is not possible to 
operate the plasma TV with the operating buttons on 
the device. 
Possible values:  On, Off