Fujitsu Myrica P42 2 User Manual
Have a look at the manual Fujitsu Myrica P42 2 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 86 Fujitsu manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 9 Ventilation ! To ensure sufficient ventilation, the intake and exhaust air openings of the device must never be blocked. >10 cm>20 cm>20 cm >10 cm >10 cm>10 cm When installing the TV in niches, maintain the minimum distance for sufficient ventilation of the device: 10 cm from the side and back, 20 cm from the top.
MYRICA P42-1A / P42-2 / P50-2 10 - English A26361-K1040-Z120-1-M119, edition 3 Connections on plasma TV ! Observe the safety precautions in the Impor tant notes chapter in this operating manual. Do not cover the ventilation openings of the monitor. Never open the housing of the power suppl y unit. There is extreme danger from an electrical shock with the housing open. There are no components requiring cleaning or repairs in the interior. 123 6 4 5 789 5 11 13 1412 10 1 = RS-232 port 2 = DVI port 3 = AUDIO ports (LINE) 4 = PC-IN port (VGA) 5 = COMPONENT ports (2x) 6 = Loudspeaker ports 7 = SCART1 port (Half) 8 = SCART2 port (Full) 9 = S-VIDEO port 10 = AV ports (OUT) 11 = AV ports (IN) 12 = ON/OFF switch 13 = Antenna port 14 = Power connector The following devices can be c onnected to this plasma TV: RS-232 (black) Serial port For customer service, e.g. for updating the firmware DVI IN (white) Connection for digital video input signals e.g. a PC with a digital output (DVI-D) or for HDTV devices AUDIO IN white (left) red (right) Connection for audio input signals (LINE IN) e.g. for a PC or for HDTV devices
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 11 PC IN (blue) Connection for analogue VGA input signals e.g. for a PC with an analogue output (D-SUB) COMPONENT 1 COMPONENT 2 Y - green Pb - blue Pr - red AUDIO white (left) red (right) Connections for component video and audio input signals e.g. for HDTV decoder, HDTV video recorder or HDTV player SPEAKER red/right/+ black/right/- black/left/- red/left/+ Connection terminals for external loudspeakers SCART 1 (Half) Connection for AV (CVBS) and audio input signals e.g. for satellite receiver, DVD player, video recorder, decoders or a gaming console SCART 2 (Full) Connection for AV (CVBS, RGB) and audio input signals e.g. for satellite receiver, DVD player, video recorder, camcorder or a gaming console
MYRICA P42-1A / P42-2 / P50-2 12 - English A26361-K1040-Z120-1-M119, edition 3 S-VIDEO IN Connection for S-VIDEO input signals e.g. for DVD player, video recorder or film camera with S- Video connection AV: VIDEO yellow AUDIO white (left) red (right) Connections for video and audio input signals e.g. for DVD player, video recorder, film camera with S-Video connection or gaming console TV-ANT. antenna cable port AC INPUT Connector for the power cable
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 13 Connecting plasma TV Connecting antenna ► Connect an antenna cable to the antenna connection of the plasma TV and to the TV antenna socket. Connecting the power supply ► Plug the power cable supplied into the power connector of the LCD TV. You will find the power connector on the back of the plasma TV. ► Connect the connector of the power cable supplied into a properly earthed mains outlet and ensure a secure connection.
MYRICA P42-1A / P42-2 / P50-2 14 - English A26361-K1040-Z120-1-M119, edition 3 Switching plasma TV on/off ► Press the ON/OFF switch at the left on the back of the plasma TV. Switching plasma TV on/into standby mode ► Press the Standby button at the right on the underside of the plasma TV. From the indicator at the lower right on the front of the plasma TV you can recognise whether the device is in operation, in the standby mode or switched off. Green Red Dark = = = The device is switched on. The device is in standby mode. The device is switched off.
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 15 Setting language of the OSD menu After switching on the device, set the language of the OSD (On Screen Display) menu according to your needs. English is the set as the default setti ng. If you want to use a different language, change this setting with the OSD menu. ► Switch the plasma TV on with the ON/OFF switch. ► Press the POWER button. ► Press the MENU button to open the OSD menu. ► Choose the Setup menu item using the button. ► Press the MENU button to activate the menu item. ► Choose the Advanced menu item using the button. ► Press the MENU button to activate the menu item. ► Choose the Language menu item using the button. ► Press the MENU button to activate the menu item. ► Select the language to be shown in the OSD menu with the buttons / . ► Press the Menu button. The OSD menu will be changed over to the selected language. Carrying out programme search A programme search must be carried out to put t he plasma TV into operation. Use the supplied remote control. ► Switch the plasma TV on with the ON/OFF switch. ► Press the POWER button. First the signal source must be set to the TV mode. ► Press the SOURCE button. ► Choose the TV option using the button. ► Press the MENU button to activate the menu item. Then you automatically start the programme search. ► Press the MENU button to open the OSD menu. ► Choose the TV menu item using the button.
MYRICA P42-1A / P42-2 / P50-2 16 - English A26361-K1040-Z120-1-M119, edition 3 ► Press the MENU button to activate the menu item. ► Select the Auto Scan menu item using the button. ► Press the MENU button to activate the menu item. ► Select your country with the button. ► Press the MENU button to start the programme search. Wait until the programme search is completed. Then the device shows the first programme found. i The programmes will be entered in the programme list in the order in which they are found. However, you can change the order of the programmes later (see Arranging programmes). Adjusting programme settings After the programme search, you can change various pr ogramme settings later, e.g. the order of the programmes in the programme list, the progra mme names or the frequency of a channel. The following sections contain a descrip tion of how to change the settings. ► Press the MENU button to open the OSD menu. ► Choose the TV menu item using the button. ► Press the MENU button to activate the menu item. ► Choose the Edit menu item using the button. ► Press the MENU button to activate the menu item. The programme list will be displayed with the fi rst 8 programmes found. If a programme name was detected during the programme search, it will be displayed.
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 17 Arranging programmes With the OSD menu you can rearrange the order of the programmes according to your personal preferences. Moving programme ► Select the programme you want to move with the buttons / . ► Press the INSERT button (yellow) to mark the programme to be moved. ► Select the position at which you want to insert the programme with the buttons / . ► Press the INSERT button (yellow). The programme will be inserted at the selected position. Swapping position of two programmes ► Select the programme you want to move with the buttons / . ► Press the REPLACE button (blue) to mark the programme to be swapped. ► Mark the programme with which the programme is to be swapped with the buttons / . ► Press the REPLACE button (blue). The selected programmes swap their positions. Changing programme properties You can change the following properties of a programme: ● Change the programme name displayed in the programme list ● Set the channel of a programme ● Select or automatically assign a different TV standard ● Select the sound standard ● Hide a programme in the programme list ● Select a programme as a favourite i All changes are stored automatically. Changing programme name Five characters are avail able for the programme name. ► Select the programme for which you want to set the name with the buttons / . ► Mark the position for the character you want to change under Name with the buttons / . ► Select the desired character at this position with the buttons / . Repeat this procedure until you have entered the desired programme name.
MYRICA P42-1A / P42-2 / P50-2 18 - English A26361-K1040-Z120-1-M119, edition 3 Setting channel of a programme This function is used when a programme is transmitted on a new station frequency. ► Select the programme for which you want to set another channel with the buttons / . ► Mark the property CH with the buttons / . ► Select the desired channel with the / buttons. Selecting TV standard ► Select the programme for which you want to set the TV standard with the buttons / . ► Mark the property Picture with the buttons / . ► Select the desired TV standard with the buttons / or assign the suitable TV standard ( Pal , Secam , Auto ) automatically. Selecting sound standard ► Select the programme for which you want to set the sound standard with the buttons / . ► Mark the property Sound with the buttons / . ► Select the desired sound standard ( B/G, D/H , L, I, Auto ) with the buttons / . Hiding programme in programme list If you want to hide a programme in the programme list ( SKIP=Yes ), the programme is skipped when you change the programmes with the buttons / . ► Select the programme you want to hide in the programme list with the buttons / . ► Press the SKIP button (green). The selected programme is hidden in the programme list. Selecting programme as favourite In the TV mode it is possible to change directly to programmes marked as favourites by pressing the FAVORITE button. ► Select the program you want to select as a favourite with the buttons / . ► Mark the property FAV with the buttons / . ► Select the value Yes with the buttons / .