Ford Fusion 2 Manual

6000CD and 6006CDC
Menu functions
Second level
First level
During all functions
During CD playback
During tape playback
During radio recep-
tion
Traffic local ordistant
Scan
12/24 hour
Manual tuning
AF**
Shuffle
AVC *
Scan tuning
REG
Repeat
ADV menu
12/24 hour
News
Comp
-
AVC *
CLIP
12/24 hour
-
ADV menu
VID
AVC *
-
-
Bluetooth enable/disable
ADV menu
-
-
Note: The sequence in which functions appear may vary for different audio units and
vehicles.
Note: Second level functions (advanced) can also be...

Menu functions
During CD playback
During radio reception
TA3
 volume
TA 3
 volume
Traffic local or distant
Traffic local or distant
Shuffle
Regional ON/OFF
Repeat
-
Comp ON/OFF
-
Note: The sequence in which functions appear may vary for different audio units and
vehicles.
1 Automatic volume control.
2 Alternative frequencies.
3 Traffic announcement.
140
Audio unit operation 

STATION PRESET BUTTONS
This feature allows you to store your
favourite stations so that they can be
recalled by selecting the appropriate
waveband and pressing one of the preset
buttons.
1. Select a waveband.
2. Tune to the station required.
3. Press and hold one of the preset
buttons. The audio unit will mute.
When sound returns the station has
been stored.
This can be repeated on each waveband
and for each preset button.
Note: When you drive to another part of the
country, FM RDS (radio data system)...

When traffic information is broadcast, it
will automatically interrupt normal radio,
tape or CD playback and TRAFFIC or
NEWS will be shown in the display.
If the traffic signal weakens, TP will flash
in the display. Press the seek up or seek
down button (the left or right navigation
button on Sony or Sony DAB audio units)
to find another station.
Note:
If this happens during CD or AUX
playback or, on certain models, with the
radio volume set to zero, the unit will retune
automatically if the station is...

STATION TUNING CONTROL
DAB service linking
Note:
The DAB service linking is as per
default off.
Note: Service linking allows
cross-referencing to other corresponding
frequencies of the same station, for example
FM and other DAB ensembles.
Note: The system will automatically
change to another corresponding station if
the current one becomes unavailable, for
example when leaving the coverage area.
Switching DAB service linking on
1. Press the MENU button.
2. Using the up or down navigation button
scroll...

6000CD and 6006CDC
1. Press the MENU button repeatedly
until SCAN is shown in the display.
2. Press the seek up or seek down button
to scan up or down the selected
waveband.
3. Depending on the audio unit, press the
seek up or seek down button or the
MENU
 button to continue listening to
a station.
Sony CD
1. Press the SCAN button. SCAN flashes
or SCANNING is shown in the display.
2. Press the left or right navigation button
to scan within a waveband.
3. Press the 
SCAN button to continue
listening to a...

AUTOMATIC VOLUME
CONTROL
This function adjusts the volume level to
compensate for engine and road speed
noise.
6000CD and 6006CDC
1. Press the MENU button repeatedly
until AVC is shown in the display.
2. Use the seek up or seek down button to adjust the setting.
3. Press the 
MENU button or allow the
system to time out to confirm your
selection.
Sony CD
1. Press the 
MENU button.
2. Using the up or down navigation button
scroll through the display until AVC is
shown in the display.
3. Press the 
MENU...

ALTERNATIVE FREQUENCIES
Many programmes broadcast on the FM
waveband have a PI (programme
identification) code, which can be
recognised by audio units.
If your radio has AF (alternative
frequencies) tuning switched on and you
move from one transmission area to
another, this function will search for and
switch to a stronger station signal, if one
can be found.
Under certain conditions, however, AF
tuning may temporarily disrupt normal
reception.
When selected, the unit continually
evaluates signal...

3.
Using the seek up or seek down button
turn the function on or off.
4. Press the MENU button or allow the
system to time out to confirm your
selection.
Sony CD
1. Press the 
MENU button briefly.
2. Using the up or down navigation button
scroll through the display until
REGIONAL is shown in the display.
3. Press the 
MENU button or allow the
system to time out to confirm your
selection.
NEWS BROADCASTS
Some audio units interrupt normal
reception to broadcast news bulletins from
stations on the FM...

LOADING COMPACT DISCS
6000CD
Always check that the CD aperture is
empty before inserting a CD.
Insert a CD, label side up, into the audio
unit.
6006CDC
To load a single CD
Press and release the LOAD button or
press a preset button. WAIT will be shown
in the display.
When the message changes to LOAD CD,
and lights flash in the CD aperture, Insert
a CD, label side up, into the audio unit.
To load more than one CD WARNING
If the power to the audio unit has
been disconnected, then
reconnected, the unit will...