Ford Fusion 2 Manual

							6000CD and 6006CDC
Menu functions
Second level
First level
During all functions
During CD playback
During tape playback
During radio recep-
tion
Traffic local ordistant
Scan
12/24 hour
Manual tuning
AF**
Shuffle
AVC *
Scan tuning
REG
Repeat
ADV menu
12/24 hour
News
Comp
-
AVC *
CLIP
12/24 hour
-
ADV menu
VID
AVC *
-
-
Bluetooth enable/disable
ADV menu
-
-
Note: The sequence in which functions appear may vary for different audio units and
vehicles.
Note: Second level functions (advanced) can also be entered by selecting ADV menu from
the first level menu.
* Automatic volume control.
**  Alternative frequencies.
Sony CD Menu functions
During CD playback
During radio reception
12/24 hour
12/24 hour
CLIP ON/OFF
CLIP ON/OFF
News ON/OFF
News ON/OFF
AVC1
AVC 1
AF2
AF 2
139
Audio unit operation 
						

							Menu functions
During CD playback
During radio reception
TA3
 volume
TA 3
 volume
Traffic local or distant
Traffic local or distant
Shuffle
Regional ON/OFF
Repeat
-
Comp ON/OFF
-
Note: The sequence in which functions appear may vary for different audio units and
vehicles.
1 Automatic volume control.
2 Alternative frequencies.
3 Traffic announcement.
140
Audio unit operation 
						

							STATION PRESET BUTTONS
This feature allows you to store your
favourite stations so that they can be
recalled by selecting the appropriate
waveband and pressing one of the preset
buttons.
1. Select a waveband.
2. Tune to the station required.
3. Press and hold one of the preset
buttons. The audio unit will mute.
When sound returns the station has
been stored.
This can be repeated on each waveband
and for each preset button.
Note: When you drive to another part of the
country, FM RDS (radio data system)
stations that broadcast on alternative
frequencies are stored on the preset
buttons.
WAVEBAND BUTTON
Note: The AM/FM or RADIO button can also
be used to return to radio reception when
you have been listening to another source.
6000CD and 6006CDC
Press the 
AM/FM button to select from
the wavebands available.
Sony CD
Press the 
RADIO button to select from the
wavebands available.
AUTOSTORE CONTROL
Note: This function will overwrite the
previously stored autostore preset stations.
Note: This function can also be used to
store stations manually in the same way as
other wavebands. Note:
The strongest signals available on
the selected waveband will be stored.
The sound is muted and AUTOSTORE will
be shown in the display while the unit
searches through the frequencies.
When the search is complete, sound is
restored and the strongest signals are
stored on the autostore presets.
6000CD and 6006CDC
Press and hold the 
AM/FM button.
Sony CD
Press and hold the AST or RADIO button.
TRAFFIC INFORMATION
CONTROL
Many stations that broadcast on the FM
waveband have a TP code to signify that
they carry traffic programme information.
Activating traffic announcements
Before you can receive traffic
announcements, you must press the 
TA
button. Either TA-D or TA-L will be shown
in the display to indicate that the feature
is switched on.
If you are already tuned to a station that
broadcasts traffic information, TP will also
be shown in the display. Otherwise the unit
will search for a traffic programme and
display TP SEEK while doing so. If it cannot
locate such a station, NOT FOUND will be
shown in the display.
TP will be shown within a box in the display
when you are tuned to a station providing
traffic information from a linked RDS (radio
data system) or EON (enhanced other
network) station.
141
Audio unit operation 
						

							When traffic information is broadcast, it
will automatically interrupt normal radio,
tape or CD playback and TRAFFIC or
NEWS will be shown in the display.
If the traffic signal weakens, TP will flash
in the display. Press the seek up or seek
down button (the left or right navigation
button on Sony or Sony DAB audio units)
to find another station.
Note:
If this happens during CD or AUX
playback or, on certain models, with the
radio volume set to zero, the unit will retune
automatically if the station is not available.
If a non-traffic station is selected or
recalled using a preset button, the audio
unit will remain on that station unless TA
is turned off, then on again.
Note: If 
TA is on and you select a preset or
manual tune to a non TA station no traffic
announcement will be heard.
Local or distant traffic
The number of RDS or EON traffic
announcements may become excessive
in some areas so there is an option to
select between local traffic information
and all available information.
6000CD and 6006CDC
1. Press and hold the 
MENU button until
the display changes.
2. Press the 
MENU button repeatedly
until TA is shown in the display.
3. Press the seek up or seek down button
to select either local (TA LOCAL) or
distant (TA DIST) traffic
announcements.
4. Press the 
MENU button or allow the
menu to time out to confirm your
selection.
Note: Either TA-L or TA-D will be shown in
the display. Sony CD
1. Press the 
MENU button and use the
up or down navigation button to select
the TA display.
2. Press the left or right navigation button
to select your required setting.
3. Press the 
MENU button to confirm
your selection.
Traffic announcement volume
Traffic announcements interrupt normal
broadcasts at a preset minimum level that
is usually louder than normal listening
volumes.
To adjust the preset volume
6000CD and 6006CDC
1. Press and hold the 
TA button.
2. Rotate the volume control to make the
necessary adjustment.
Note: The selected level will be shown in
the display.
Sony CD
1. Press and hold the 
TA button.
2. Press the left or right navigation button
to make the necessary adjustment.
Note: The selected level will be shown in
the display.
Ending traffic announcements
The audio unit will return to normal
operation at the end of each traffic
announcement. To end the announcement
prematurely, press 
TA during the
announcement.
Note: If you press 
TA at any other time it
will switch all announcements off.
142
Audio unit operation 
						

							STATION TUNING CONTROL
DAB service linking
Note:
The DAB service linking is as per
default off.
Note: Service linking allows
cross-referencing to other corresponding
frequencies of the same station, for example
FM and other DAB ensembles.
Note: The system will automatically
change to another corresponding station if
the current one becomes unavailable, for
example when leaving the coverage area.
Switching DAB service linking on
1. Press the MENU button.
2. Using the up or down navigation button
scroll through the display until DIGITAL
RADIO SERVICE LINK is shown in the
display.
3. Using the left or right navigation button
select AUTO.
4. Press the 
MENU button or the button
between the navigation buttons to
confirm your selection.
Switching DAB service linking off
1. Press the 
MENU button.
2. Using the up or down navigation button
scroll through the display until DIGITAL
RADIO SERVICE LINK is shown in the
display.
3. Using the left or right navigation button
select OFF.
4. Press the 
MENU button or the button
between the navigation buttons to
confirm your selection. Seek tuning
6000CD and 6006CDC
Select a waveband and briefly press the
seek up or seek down button. The unit will
stop at the first station it finds in the
direction you have chosen.
Sony CD
Select a waveband and briefly press the
up or down navigation button. The unit will
stop at the first station it finds in the
direction you have chosen.
Manual tuning
6000CD and 6006CDC
1. Select a waveband and press the
MENU
 button until MAN is shown in
the display.
2. Press the seek up or seek down button
to tune up or down the waveband in
small increments or press and hold to
increment quickly, until you find a
station you want to listen to.
Sony CD
Select a waveband and briefly press the
up or down navigation button to tune up
or down the waveband in small
increments. The display shows the
frequency selected.
Scan tuning
The scan function allows you to listen to
10 seconds of each station detected.
143
Audio unit operation 
						

							6000CD and 6006CDC
1. Press the MENU button repeatedly
until SCAN is shown in the display.
2. Press the seek up or seek down button
to scan up or down the selected
waveband.
3. Depending on the audio unit, press the
seek up or seek down button or the
MENU
 button to continue listening to
a station.
Sony CD
1. Press the SCAN button. SCAN flashes
or SCANNING is shown in the display.
2. Press the left or right navigation button
to scan within a waveband.
3. Press the 
SCAN button to continue
listening to a station.
144
Audio unit operation 
						

							AUTOMATIC VOLUME
CONTROL
This function adjusts the volume level to
compensate for engine and road speed
noise.
6000CD and 6006CDC
1. Press the MENU button repeatedly
until AVC is shown in the display.
2. Use the seek up or seek down button to adjust the setting.
3. Press the 
MENU button or allow the
system to time out to confirm your
selection.
Sony CD
1. Press the 
MENU button.
2. Using the up or down navigation button
scroll through the display until AVC is
shown in the display.
3. Press the 
MENU button or allow the
system to time out to confirm your
selection.
DIGITAL SIGNAL PROCESSING
(DSP)
DSP occupancy
This feature takes into account the
differences in distance from the various
speakers in the vehicle to each seat. Select
the sitting position for which the audio is
to be correctly enhanced.
DSP equaliser
Select the music category that most suits
your listening preference. The audio output
will change to enhance the particular style
of music chosen. Changing the DSP settings
1. Press the 
DSP button once for
occupancy and twice for equaliser.
2. Use the up and down navigation buttons to select the required setting.
3. Press the button between the navigation buttons to confirm your
selection.
AUDIO DISTORTION
REDUCTION (CLIP)
This function automatically detects sound
distortion and reduces the volume level
until the distortion has been eliminated.
This means that whilst the display might
change numerically when you raise the
volume manually with the control, there
may be no actual increase in sound.
6000CD and 6006CDC
1. Press and hold the 
MENU button until
the display changes.
2. Press the 
MENU button repeatedly
until CLIP is shown in the display.
3. Using the seek up or seek down button
turn the function on or off.
4. Press the 
MENU button or allow the
system to time out to confirm your
selection.
Sony CD
1. Press the 
MENU button briefly.
2. Using the up or down navigation button
scroll through the display until CLIP is
shown in the display.
3. Press the 
MENU button or allow the
system to time out to confirm your
selection.
145
Audio unit menus 
						

							ALTERNATIVE FREQUENCIES
Many programmes broadcast on the FM
waveband have a PI (programme
identification) code, which can be
recognised by audio units.
If your radio has AF (alternative
frequencies) tuning switched on and you
move from one transmission area to
another, this function will search for and
switch to a stronger station signal, if one
can be found.
Under certain conditions, however, AF
tuning may temporarily disrupt normal
reception.
When selected, the unit continually
evaluates signal strength and, if a better
signal becomes available, the unit will
switch to that alternative. It mutes while
it checks a list of alternative frequencies
and, if necessary, it will search once across
the selected waveband for a genuine
alternative frequency.
It will restore radio reception when it finds
one or, if one is not found, the unit will
return to the original stored frequency. On
certain units, NOT FOUND will be shown
in the display.
With AF-MAN selected, the unit operates
in a similar way to AF-AUTO or AF-ON, but
only searches for an alternative frequency
when prompted by pressing a preset
button.
With AF-OFF selected, the original stored
frequency remains selected. In this mode,
AF-OFF will be displayed every time the
unit is turned on.
6000CD and 6006CDC
1.
Press and hold the MENU button until
the display changes.
2. Press the 
MENU button repeatedly
until AF is shown in the display. 3.
Using the seek up or seek down button
select the required setting.
4. Press the 
MENU button or allow the
system to time out to confirm your
selection.
Sony CD
1. Press the 
MENU button briefly.
2. Using the left or right navigation button
scroll through the display until the
required setting is shown in the display.
3. Press the 
MENU button to confirm
your selection.
REGIONAL MODE (REG)
The function REG (regional mode) controls
the behaviour of AF switching between
regionally related networks of a parent
broadcaster. A broadcaster may run a fairly
large network across a large part of the
country. At various times of the day this
large network may be broken down into a
number of smaller regional networks,
typically centred on major towns or cities.
When the network is not split into regional
variants, the whole network caries the
same programming.
Regional mode ON: This prevents random
AF switches when neighbouring regional
networks are not carrying the same
programming.
Regional mode OFF: This allows a larger
coverage area if neighbouring regional
networks are carrying the same
programming, but can cause random AF
switches if they are not.
6000CD and 6006CDC
1. Press and hold the 
MENU button until
the display changes.
2. Press the 
MENU button repeatedly
until REG is shown in the display.
146
Audio unit menus 
						

							3.
Using the seek up or seek down button
turn the function on or off.
4. Press the MENU button or allow the
system to time out to confirm your
selection.
Sony CD
1. Press the 
MENU button briefly.
2. Using the up or down navigation button
scroll through the display until
REGIONAL is shown in the display.
3. Press the 
MENU button or allow the
system to time out to confirm your
selection.
NEWS BROADCASTS
Some audio units interrupt normal
reception to broadcast news bulletins from
stations on the FM waveband linked
stations, in the same way as traffic
information is provided.
During news broadcasts, the display
alternates between the station name and
NEWS. News interrupts are broadcast at
the same preset volume level as traffic
announcements.
6000CD and 6006CDC
1. Press and hold the 
MENU button until
NEWS is shown in the display.
2. Using the seek up or seek down button
turn the function on or off.
3. Press the 
MENU button to confirm
your selection.
Sony CD
1. Press the 
MENU button.
2. Using the up or down navigation button
scroll through the display until NEWS
is shown in the display. 3. Press the button between the
navigation buttons to make your
selection.
4. Using the left or right navigation button
turn the function on or off.
5. Press the 
MENU button or the button
between the navigation buttons to
confirm your selection.
147
Audio unit menus 
						

							LOADING COMPACT DISCS
6000CD
Always check that the CD aperture is
empty before inserting a CD.
Insert a CD, label side up, into the audio
unit.
6006CDC
To load a single CD
Press and release the LOAD button or
press a preset button. WAIT will be shown
in the display.
When the message changes to LOAD CD,
and lights flash in the CD aperture, Insert
a CD, label side up, into the audio unit.
To load more than one CD WARNING
If the power to the audio unit has
been disconnected, then
reconnected, the unit will
automatically check for the presence of
discs. This will take approximately 25
seconds. During this time all functions
except Keycode entry will be locked out. 1. Press and hold the 
LOAD button until
LOAD ALL is shown in the display.
2. When the message changes to 
LOAD
CD, and lights flash in the CD aperture,
insert a CD, label side up, into the audio
unit.
3. A numbered disc icon will flash in the display and 
LOAD will be shown in the
display. When the disc is loaded, a
number in one of the disc icons will
indicate its location. 4. When the message changes to 
WAIT
and then to LOAD CD you can load
another CD.
5. Repeat the last step to load more CDs or allow the unit to time out if you have
finished loading your discs.
Note: Do not try to insert a CD when 
WAIT
is shown in the display.
Note: Do not insert two CDs in a figure of
eight fashion with edges overlapping.
Note: You can only load a maximum of six
CDs.
Note: If the 
LOAD button is pressed again,
CDC FULL will be shown in the display.
Sony CD
Always check that the CD aperture is
empty before inserting a CD.
Insert a CD, label side up, into the audio
unit.
LOADING
, READING CD and AUDIO CD
or MP3 CD will be shown in the display,
and playback will start automatically.
TRACK SELECTION
6000CD and 6006CDC
Press the seek up button once to move to
the next track or press it repeatedly to
access later tracks.
Press the seek down button once to replay
the current track. If pressed within two
seconds of the start of a track, the previous
track will be selected.
Press the seek down button repeatedly to
select previous tracks.
Sony CD
Press the up navigation button once to
move to the next track or press it
repeatedly to access later tracks.
148
Compact disc player