Ford Fusion 2 Manual

Press the down navigation button once to
replay the current track. If pressed within
two seconds of the start of a track, the
previous track will be selected.
Press the down navigation button
repeatedly to select previous tracks.
COMPACT DISC PLAYBACK
Note:
During playback, the display indicates
the disc, track and time that has elapsed
since the start of the track.
Note: On CD changer audio units, if two or
more CD's are loaded one after the other,
playback will start with the last CD loaded.
6000CD...

Note:
With the function on, SHUFFLE will
be shown in the display as each new track
is selected.
Sony CD
1. Press the MENU button.
2. Using the up or down navigation button
scroll through the display until
SHUFFLE is shown in the display.
3. Use the left or right navigation button to switch the function on and off.
COMPACT DISC TRACK
COMPRESSION
6000CD and 6006CDC
1. Press 
MENU repeatedly until COMP is
shown in the display.
2. Using the seek up or seek down button
turn the function on or off.
3. Press...

Sony CD
Note:
If no CD is loaded when the EJECT
button is pressed, NO CD will be shown in
the display.
Press the 
EJECT button at any time and
remove the CD. EJECTING and PLEASE
REMOVE will be shown in the display.
REPEAT COMPACT DISC
TRACKS
6000CD
1. Press the 
MENU button repeatedly
until REPEAT is shown in the display.
2. Using the seek up or seek down button
choose between 
OFF and TRK.
6006CDC
1. Press the 
MENU button repeatedly
until REPEAT is shown in the display.
2. Using the seek up or seek...

AUXILIARY INPUT (AUX IN)
SOCKET
Note:
For optimum performance when
using any auxiliary device set the volume on
the device high. This will reduce audio
interference when charging the device via
the vehicle power supply socket.
When fitted the Auxiliary input (AUX IN)
socket permits an auxiliary device, such as
an MP3 player, to be linked into the vehicle
audio system. Output can be played
through the vehicle speakers.
To connect an auxiliary device, plug it into
the AUX IN socket using a 3.5 mm...

AUDIO TROUBLESHOOTING
Rectification
Audio unit display
General error message for CD fault conditions, for
example cannot read the CD, data-CD inserted. May
also indicate a audio unit malfunction. Make sure that
the disc is correctly loaded, clean and re- load the CD
or replace the CD with a known music CD.  See Ejecting
compact discs (page 150).  See Ejecting multiple
compact discs  (page 151).  See Loading compact
discs (page 148).  If error continues. See your dealer.
CD ERROR
PLEASE CHECK CD CDC...

Rectification
Audio unit display
Message to inform you that the entered keycode is
incorrect.  See Incorrect security code (page 136).
INCORRECT
154
Audio troubleshooting 

GENERAL INFORMATION
This section describes the functions and
features of the Bluetooth mobile phone
and voice control system.
The section covers the following variations:
•
a mobile phone with a mobile phone
cradle without voice control
• a Bluetooth and voice control system
with a mobile phone cradle
• a Bluetooth and voice control system
without a mobile phone cradle.
The Bluetooth mobile phone part of the
system provides interaction with the audio
or navigation system and your mobile
phone. It allows...

Phonebook categories
Depending on your phonebook entry,
different categories can be displayed in
the audio or navigation unit.
For example:
Mobile
M
Office
O
Home
H
Fax
F
Note: Entries may be displayed without a
category attachment.
The category can also be indicated as an
icon: Phone
Mobile
Home
Office
Fax
Making a phone an active phone
When using the system for the first time,
no phone is connected to the system.
After switching on the ignition the cradle
phone and the Bluetooth phone are
recognized...

Handling of phones
A phone can be connected to the vehicle
system by using either a cradle connection
or a Bluetooth connection.
On vehicles with a mobile phone cradle,
up to five Bluetooth phones can be bonded
to the vehicle system.
On vehicles without a mobile phone cradle,
up to six Bluetooth phones can be bonded
to the vehicle system.
Note:
If there is an ongoing call when the
phone in use is selected as the new active
phone, the call is transferred to the vehicle
audio system.
Note: Even if...

Voice and mode button
Voice button
1
Mode button
2
Incoming calls can be accepted by pressing
the MODE button once or ended by
pressing twice.
Voice and accept/reject button Voice button
1
Accept/Reject button
2
The VOICE button is used to activate or
switch off the Voice control.
On vehicles with an accept/reject button,
phone calls can be accepted and rejected
by pressing the appropriate button. Note:
Some audio units have the
accept/reject buttons on the front bezel.
These operate in the same way....