Epson Xp 202 Manual

7. Pull out the paper cassette.
User's Guide
Appendix
221 

8. Lower the printer or an optional paper cassette unit gently onto the cabinet aligning the corners, and then
secure them with the screws.
Note:
Some screws will be left over after assembly.
User's Guide
Appendix
222 

9. Secure the printer or an optional paper cassette unit at the back with the attachments and screws.
10.
Insert the paper cassette.
11. Connect the cables and plug in the printer.
Note:
When uninstalling the cabinet, turn off the printer, unplug the power cord, disconnect any cables, and then perform the
installation procedure in reverse.
Related Information
&“Optional Cabinet Code” on page 219
Optional Paper Cassette Unit Code
The following is the code for the optional paper cassette unit.
500-Sheet...

Installing the Optional Paper Cassette Units
You can install up to 2 paper cassette units.
!Caution:
❏Make sure you turn off the printer, unplug the power cord from the printer, and disconnect any cables before
starting installation. Otherwise, the power cord may be damaged resulting in fire or electric shock.
❏When lifting the printer, place your hands in the positions shown below. If you lift the printer holding other
positions, the printer may fall or you may trap your fingers when placing the...

6. Pull out the paper cassette.
7. Stack all optional paper cassette units on top of each other, and then secure them with the screws.
User's Guide
Appendix
225 

8. Lower the printer gently onto the optional paper cassette aligning the corners, and then secure them with the
screws.
Note:
Some screws will be left over after assembly.
9. Secure the optional paper cassette unit and the printer at the back with the attachments and screws.
User's Guide
Appendix
226 

10. Insert a label showing the size of the paper to be loaded in the cassette into the holder.
11. Insert the paper cassette.
12.
Place the sticker indicating the cassette number.
13. Reconnect the power cord and any other cables, and then plug in the printer.
14.
Turn on the printer by pressing the 
P button.
15. Pull out and reinsert the optional paper cassette unit to check that the optional paper cassette unit is displayed
on the Paper Setup screen.
Note:
When uninstalling the optional paper cassette...

Related Information
&“Optional Paper Cassette Unit Code” on page 223
&“Installing the Optional Cabinet” on page 219
Setting the Optional Paper Cassette Unit in the Printer Driver
To use the installed optional paper cassette unit, the printer driver needs to acquire the necessary information.
Setting the Optional Paper Cassette Unit in the Printer Driver - Windows
Note:
Log on to your computer as an administrator.
1.
Open the Optional Settings tab from the printer properties.
❏Windows 8.1/Windows...

cImportant:
❏When sharing an external device inserted in the printer between computers connected over USB and over a
network, write access is only allowed to the computers that are connected by the method you selected on the
printer. To write to the external USB device, enter the Setup on the control panel, and then select System
Administration > Printer Settings > Memor y Device Inter face > File Sharing and a connection method. Data
can be read by computers connected over USB and over a network.
❏To...

1. Enter Setup from the home screen.
2. Select System Administration > Wi - F i / N e t w o r k  S e t t i n g s > Advanced Setup.
3.
Select Email Server > Server Settings.
4. Select the authentication method.
Select the authentication method of the email server you are using.
cImportant:
The following authentication methods are available. SSL and STARTTLS are not supported.
❏None
❏SMTP (SMTP AUTH)
❏POP Before SMTP
Contact your internet service provider to confirm the authentication method of the email...