Epson X410 Manual

• Check if your network name (SSID) contains non-ASCII characters. Your product cannot display non-
ASCII characters.
• If necessary, reinstall your product software and try running EpsonNet Setup again: 1. Reset your products network settings to their factory defaults.
2. Windows only: uninstall your product software.
3. Initialize your router following the instructions in your router documentation.
Note: If you are reading these instructions online, you will lose your internet connection when you...

Cannot Print Over a Network
If you cannot print over a network, try these solutions:
• Make sure that your product is turned on.
• Make sure you install your products network software as described in your product documentation.
• Print a network status sheet and verify that the network settings are correct. If the network status isDisconnected, check any cable connections and turn your product off and then on again.
• If you are using TCP/IP, make sure the products IP address is set correctly for your...

• Check the connection setting and test the connection using Epson Scan Settings:
Windows 8: Navigate to the Startscreen and select EPSON Scan Settings. Make sure the
Connection setting is set to Network, then click the Testbutton.
Windows (other versions): Click or Start>All Programs orPrograms >EPSON >EPSON
Scan >EPSON Scan Settings. Make sure the Connectionsetting is set to Network, then click the
Test button.
Mac OS X: Open the Applicationsfolder, clickEpson Software, and click EPSON Scan Settings....

• If the nozzle check page does not print, but the products power is on, make sure your product
software is installed correctly.
• Make sure your product is level (not tilted).
Parent topic: Solving Copying Problems
Related concepts
Print Head Cleaning
Print Head Nozzle Check
Product Makes Noise When It Sits for a While Your product is performing routine maintenance. This is normal.
Parent topic:Solving Copying Problems
Solving Paper Problems Check these sections if you have problems using paper with...

• Follow any special loading instructions that came with the paper.
Parent topic: Solving Paper Problems
Related references
Paper Jam Problems
Paper Loading Capacity
Related topics
Loading Paper
Paper Jam Problems If you have problems with paper jams, try these solutions:
1. Cancel the print job from your computer, if necessary.
2. Gently pull out any jammed paper from the output tray and sheet feeder.
3. Press the start button to resume printing. If the product messages still show an error, continue...

Related tasks
Cancelling Printing Using a Product Button
Related topics
Loading Paper
Paper Ejection Problems If you have problems with paper ejecting properly, try these solutions:
• If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper.Select the correct paper size when you reprint.
• If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select the correct paper type setting when you reprint.
Parent topic:...

• If you connected your product to a USB hub, make sure it is a first-tier hub. If it still does not print,
connect your product directly to your computer instead of the hub.
• Run a product check to see if a test page prints. If the test page prints, check to see if your product software is installed correctly.
• In Windows, make sure your product is selected as the default printer.
• In Windows, clear any stalled print jobs from the Windows Spooler: •Windows 8: Navigate to the Startscreen, right-click...

•
Windows XP: Click Startand select Printers and Faxes. (Or open the Control Panel, select
Printers and Other Hardware, if necessary, and Printers and Faxes.)
2. Right-click your product name, select Printing Preferences, and select your product name again if
necessary.
3. Click the Maintenance tab.
4. Click the Extended Settings button.
5. Click the Monitoring Preferences button.
6. Click the Register the shortcut icon to the taskbar checkbox.
7. Click OKto close the open program windows.
Parent topic:...

• Close any programs you are not using when you print.
• If your product is connected to a USB hub, connect it directly to your computer instead.
• If printing becomes slower after printing continuously for a long time, the product may have
automatically slowed down to protect the print mechanism from overheating or becoming damaged.
Let the product rest with the power on for 30 minutes, then try printing again.
For the fastest printing, select the following settings in your product software:
• Make sure...

Incorrect Image Size or Position
Slanted Printout
Parent topic:
Solving Problems
Inverted Image If your printed image is inverted unexpectedly, try these solutions:
• Turn off any mirror or inversion settings in your printing application.
• Turn off theMirror Image, Flip horizontally, or Reverse page orientation settings in your printer
software. (This option has different names, depending on your operating system version.)
Note: Leave these options turned on when you print on Epson Iron-on Cool Peel...