Epson X410 Manual

Cleaning the Print Head Using the Product Control Panel
You can clean the print head using the control panel on your product.
1. Load a few sheets of plain paper in the product.
2. Press the home button, if necessary.
3. Press the left or right arrow buttons to select Setupand press the OKbutton.
4. Press the up or down arrow buttons to select Maintenanceand press theOKbutton.
You see this screen:
5. Press the up or down arrow buttons to select Head Cleaningand press theOKbutton.
You see this screen:
171 

6. Press the start button to begin the cleaning cycle.
Caution: Never turn off the product during a cleaning cycle or you may damage it.
The power light flashes throughout the cleaning cycle and stays on green when the cleaning cycle
is finished. You see this screen:
7. Select Nozzle Check and press theOKbutton to run a nozzle check to confirm that the print head is
clean.
172 

If you don’t see any improvement after cleaning the print head up to 4 times, turn off the product and wait
at least 6 hours. Then try cleaning the print head again. If quality still does not improve, one of the ink
cartridges may be old or damaged and needs to be replaced.
Parent topic:
Print Head Cleaning
Related concepts
Print Head Nozzle Check
Related topics
Replacing Ink Cartridges
Cleaning the Print Head Using a Computer Utility You can clean the print head using a utility on your Windows or Mac...

4. Click
Startto begin the cleaning cycle.
The power light flashes throughout the cleaning cycle and stays on when the cleaning cycle is
finished.
Caution: Never turn off the product during a cleaning cycle or you may damage it.
5. When the power light stops flashing and remains on, you can check to see if the nozzles are clean; click Print Nozzle Check Pattern and clickPrint.
6. Check the printed pattern to see if there are gaps in the lines. Print head is clean
174 

Print head needs cleaning
• If there are no gaps, click
Finish.
• If there are gaps or the pattern is faint, click Cleanto clean the print head again.
If you don’t see any improvement after cleaning the print head up to 4 times, turn off the product and wait
at least 6 hours. Then try cleaning the print head again. If quality still does not improve, one of the ink
cartridges may be old or damaged and needs to be replaced.
Parent topic: Print Head Cleaning
Related concepts
Print Head Nozzle Check
Related...

1. Load a few sheets of plain paper in the product.
2. Press the home button, if necessary.
3. Press the left or right arrow buttons to select
Setupand press the OKbutton.
4. Press the up or down arrow buttons to select Maintenanceand press theOKbutton.
You see this screen:
5. Press the arrow buttons to select Head Alignmentand press theOKbutton.
You see this screen:
176 

6. Press the start button to print an alignment sheet.
Note: Do not cancel printing while you are printing a head alignment pattern.
You see this screen:
7. Check the printed pattern and press the arrow buttons to choose the number representing the best printed pattern for each set. Press the OKbutton after each selection.
Parent topic: Print Head Alignment
Aligning the Print Head Using a Computer Utility You can align the print head using a utility on your Windows computer or Mac.
1. Load a few sheets...

4. Click
Next, then click Printto print an alignment sheet.
Note: Do not cancel printing while you are printing a head alignment pattern.
You see a window like this:
5. Check the printed pattern and follow the instructions on the screen to choose the number representing the best printed pattern for each set.
• After choosing each pattern number, click Next.
• If no patterns are aligned in one or more of the sets, choose the closest one in each set and click Realignment. Then print another alignment sheet...

Cleaning the Paper Path
If you see ink on the back of a printout, you can clean the paper path to remove any excess ink.
1. Load a few sheets of plain paper in the product.
2. Use the product control panel to make a copy, but without placing a document on the scanner glass.
3. Check the back of the ejected paper to see if it is clean.
4. Repeat as necessary until the paper comes out clean.
Parent topic:Adjusting Print Quality
Related topics
Copying
179 

Cleaning and Transporting Your Product
See these sections if you need to clean or transport your product.
Cleaning Your Product
Transporting Your Product
Cleaning Your Product To keep your product working at its best, you should clean it several times a year.
Close the output tray and paper support when you are not using the product to protect it from dust.
Caution:Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it.
Do not use oil or other lubricants inside the...