Epson WorkForce 310 User Manual

							Notices61
A plug and jack used to connect this equipment to the premises wiring and telephone 
network must comply with the applicable FCC Part 68 rules and requirements adopted by 
the ACTA. A compliant telephone cord and modular plug is provided with this product. 
It is designed to be connected to a compatible modular jack that is also compliant. See 
installation instructions for details.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use 
a computer or other electronic device, including fax machines, to send any message unless 
such message clearly contains in a margin at the top or bottom of each transmitted page or 
on the first page of the transmission, the date and time it is sent and an identification of 
the business or other entity, or other individual sending the message and the telephone 
number of the sending machine or such business, other entity, or individual. In order to 
program this information into your fax machine, follow the instructions in “Entering Fax 
Header Information” on page 24.
According to the FCC’s electrical safety advisory, we recommend that you may install an 
AC surge arrestor in the AC outlet to which this equipment is connected. Telephone 
companies report that electrical surges, typically lightning transients, are very destructive 
to customer terminal equipment connected to AC power sources and that this is a major 
nationwide problem.
If your home has specially wired alarm equipment connected to the telephone line, ensure 
the installation of this equipment Model C362A does not disable your alarm equipment. 
If you have questions about what will disable alarm equipment, consult your telephone 
company or a qualified installer.
This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful interference to radio or 
television reception. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause interference to radio and television 
reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures:
■Reorient or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.
■Consult the dealer or an experienced radio/TV technician for help.
WF310_QG.book  Page 61  Wednesday, April 8, 2009  2:14 PM
 
						

							62Notices
WARNING 
The connection of a non-shielded equipment interface cable to this equipment will 
invalidate the FCC Certification of this device and may cause interference levels which 
exceed the limits established by the FCC for this equipment. It is the responsibility of the 
user to obtain and use a shielded equipment interface cable with this device. If this 
equipment has more than one interface connector, do not leave cables connected to 
unused interfaces. Changes or modifications not expressly approved by the manufacturer 
could void the user’s authority to operate the equipment.
For Canadian Users
1. This product meets the applicable Industry Canada technical specifications.
Le présent matériel est conforme aux spécifications techniques applicables d’Industrie Canada.
2. The Ringer Equivalence Number is an indication of the maximum number of devices 
allowed to be connected to a telephone interface. The termination on an interface may 
consist of any combination of devices subject only to the requirement that the sum of the 
RENs of all the devices does not exceed five.
L’indice d’équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux 
qui peuvent être raccordés à une interface téléphonique. La terminaison d’une interface peut 
consister en une combinaison quelconque de dispositifs, à la seule condition que la somme 
d’indices d’équivalence de la sonnerie de tous les dispositifs n’excède pas 5.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
WF310_QG.book  Page 62  Wednesday, April 8, 2009  2:14 PM
 
						

							Notices63
Copyright Notice
All rights reserved. No part of this publication may be reproduced, stored in a retrieval 
system, or transmitted in any form or by any means, electronic, mechanical, 
photocopying, recording, or otherwise, without the prior written permission of Seiko 
Epson Corporation. The information contained herein is designed only for use with this 
Epson product. Epson is not responsible for any use of this information as applied to other 
equipment.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this 
product or third parties for damages, losses, costs, or expenses incurred by purchaser or 
third parties as a result of: accident, misuse, or abuse of this product or unauthorized 
modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to 
strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.
Seiko Epson Corporation shall not be liable for any damages or problems arising from the 
use of any options or any consumable products other than those designated as Original 
Epson Products or Epson Approved Products by Seiko Epson Corporation.
Responsible Use of Copyrighted Materials
Epson encourages each user to be responsible and respectful of the copyright laws when 
using any Epson product. While some countries’ laws permit limited copying or reuse of 
copyrighted material in certain circumstances, those circumstances may not be as broad as 
some people assume. Contact your legal advisor for any questions regarding copyright law.
Trademarks
Epson is a registered trademark, Epson Exceed Your Vision is a registered logomark, and 
Supplies Central is a service mark of Seiko Epson Corporation.
WorkForce is a registered trademark and Epson Connection is a service mark of Epson 
America, Inc.
General Notice: Other product names used herein are for identification purposes only and 
may be trademarks of their respective owners. Epson disclaims any and all rights in those 
marks.
This information is subject to change without notice.
© 2009 Epson America, Inc. 3/09
WF310_QG.book  Page 63  Wednesday, April 8, 2009  2:14 PM
 
						

							CPD-27342R1
Printed in XXXXXX
WF310_QG.book  Page 64  Wednesday, April 8, 2009  2:14 PM