Epson Stylus Pro 4880 User Manual

Maintenance and Transportation181
6. When REPLACE CUTTER appears on the LCD, hold down the side pin as 
shown and turn the latch to the right.
c
Caution:
Be careful not to touch the parts highlighted below; otherwise, you may 
damage the printer. 
7. Slowly release the side pin, and carefully remove the old cutter blade.
 

182Maintenance and Transportation
8. Insert the new cutter blade as shown.
9. Push down on the side pin while turning the latch to the left.
10. When CLOSE TOP COVER appears on the LCD, close the top cover. The 
print head moves to the home position.
11. Wait until READY appears on the LCD.
Cleaning the Printer
To keep your printer in top operating condition, clean it thoroughly if it 
becomes dirty.
w
Warning:
Do not touch the gears inside the printer.
 

Maintenance and Transportation183
c
Caution:
❏Never use alcohol or paint thinner to clean the printer; these chemicals can 
damage the components as well as the case.
❏Do not let water get on the printer mechanism or electronic components.
❏Do not use a hard or abrasive brush to clean the printer.
❏Do not spray the inside of the printer with lubricants; unsuitable oils can 
damage the mechanism. Contact your dealer or a qualified service person 
if lubrication is needed. See Where To Get Help on page...

184Maintenance and Transportation
c
Caution:
Be careful not to touch the parts highlighted below; otherwise, you may 
damage the printer. 
3. If the back of your printouts are soiled, carefully clean the platen (the gray 
area shown below) using a soft, clean cloth.
4. If you see powdery paper dust in the platen, use a toothpick to remove it.
 

Maintenance and Transportation185
5. Close the top cover.
6. If the outer case is dirty, clean it using a soft, clean cloth dampened with 
mild detergent. Keep the ink compartment covers closed to prevent water 
from getting inside.
If you have not used your printer for a long time
If you have not used your printer for a long time, the print head nozzles may 
become clogged. Perform a nozzle check and clean the print head as 
necessary. 
To perform a nozzle check using the control panel, see Checking the...

186Maintenance and Transportation
Transporting the Printer
If you are moving the printer a short distance (for example, in the same 
building), raise the ink levers and have at least two people lift the printer.
To ship the printer, you must repack it using the original box and packing 
materials and secure it to a pallet. If you do not have these items, contact 
Epson to request them. Otherwise, the printer may be damaged beyond 
repair.
Note:
Ask someone to help you lift the printer. It weighs...

Maintenance and Transportation187
4. Raise the ink levers.
5. Make sure the print head is in the home (far right) position. Then lock the 
print head by pushing the green tab to the right.
c
Caution:
Be careful not to touch the parts highlighted below; otherwise, you may 
damage the printer.
6. If you saved the carriage retainer bracket, replace it and screw it back into 
place. (See your Start Here sheet.)
 

188Maintenance and Transportation
7. If you need to ship the printer, you must repack it using the original box and 
packing materials and secure it to a pallet. If you do not have these items, 
contact Epson to request them. Otherwise, the printer may be damaged 
beyond repair.
If you are transporting the printer in your own vehicle without the original 
packaging, make sure you wrap and pack the printer securely. Transport 
the printer in a horizontal position on a flat, stable surface.
8. Keep the...

Maintenance and Transportation189
To perform a nozzle check using the printer software, see Checking the 
print head nozzles on page 88 for Windows, or Checking the print head 
nozzles on page 39 for Mac OS X.
To clean the print head using the control panel, press Menu for 3 
seconds.
To clean the print head using the printer software, see Cleaning the print 
head on page 89 for Windows, or Cleaning the print head on page 40 for 
Mac OS X.
To realign the print head using the control panel, see Aligning...

190Maintenance and Transportation