Epson Stylus Photo RX700 User Manual

Making Prints From Slides or Negatives21
Placing 35-mm Film Strips in the Holder
1. Remove the film strip cover.
2. Slide your film strip into the holder. 
Note: 
The photos should be mirror-imaged when viewed from overhead. (The shinier 
side of the film faces down; the duller side faces up.)
3. Replace the film strip cover.
4. Fit the holder’s tabs into the two small holes at the rear edge of the glass. 
Make sure the film strip is in the middle of the glass (not at the rear edge) to 
align it with the...

22Copying
Scanning and Printing Your Photos
1. Close the scanner lid.
2. Press the 
Slides Negatives button. You see the screen below.
Note: 
Do not press the Copy button, or the film holder will be printed instead of the film. 
3. Select Custom Print, then press OK. You see this screen:
4. Select 
Photo (Single), then press OK. 
 

Making Prints From Slides or Negatives23 5. On the next screen, use the u, d, l, r arrow buttons to select basic print 
settings. Press 
OK when done making your settings. 
■Paper Type: Select the setting for the type of paper you’ve loaded 
(see page 31).
■Paper Size: Select the size of paper you’ve loaded. 
■Layout: If you want to print without white borders around the edges, 
choose 
Borderless. Otherwise choose with Border. 
■Restoration: Turn on to restore color to faded slides or negatives 
(see...

24Copying
10. When done selecting all your photos for printing, press OK. 
11. On the preview screen, confirm your selected photos and settings, then press 
the x 
Color button to begin printing. 
To cancel printing, press the y 
Stop button. 
Tip: 
For best results, press the 
x Color button even if you’re printing black-and-white 
photos. Color inks can be combined for improved results over black ink alone.
Cropping a Photo
If you have a photo with a subject in it you want to emphasize, you can crop...

Restoring Color From Faded Slides, Negatives, and Photos25 7. Use the l and r buttons to select the photo you want to crop, then press 
OK. 
You see the cropping screen:
8. Select the area you want to crop:
■Use the + and – buttons to resize the frame. 
■Use the u, d, l, r arrow buttons to reposition the frame. 
Press 
OK when done. 
9. On the preview screen, use the 
+ and – buttons to select the number of copies, 
then press the x
Color button to start printing. 
Restoring Color From Faded Slides,...

26Copying
Restoring 4 × 6 Photos
Follow these steps to restore faded 4 × 6-inch photos. You can place two photos on 
the scanner at once; a separate print will be made of each photo. Before starting, 
you’ll need to have some Epson Premium Glossy Photo Paper in one of these sizes: 
4×6-inch, 5×7-inch, 8×10-inch, or letter-size.
1. Press the 
Creative Projects button.
2. Select 
Reprint/Restore Photos then press OK.
3. Place one or two photos on the scanner glass, aligning them with the edges of 
the...

27
Making Prints From Your 
Digital Camera
You can print photos from your digital camera by inserting its memory card in 
your RX700 (see page 28). If your camera supports PictBridge® or USB Direct 
Print,
TM you can connect it to the RX700 with a USB cable (see page 41). 
After connecting your camera or inserting its memory card, select photos by:
■Viewing them on the RX700 screen (see pages 29 and 30)
■Printing out an index sheet to see all your photos (see page 38)
Note: 
If your camera supports...

28Making Prints From Your Digital Camera
Make sure the photos on your card meet these requirements: 
■JPEG files or uncompressed Tiff files only
■Resolutions ranging from 80 × 80 to 4600 × 4600 pixels 
■No more than 999 photos on the card (you can have additional photos, but 
the printer can read only the first 999) 
Inserting Your Camera’s Memory Card
1. Open the memory card slot cover.
2. Make sure the memory card light (next to the card slots) is off and all the slots 
are empty. Then insert your card...

Quick Printing of 4 × 6-inch Snapshots29 The memory card light flashes, then turns green. 
Caution: 
Do not insert more than one card at a time.
Wait for the memory card light to stop flashing before removing your card or turning off 
the RX700, or you may lose data on the card.
Remove any cards before connecting or disconnecting the RX700 and your computer.
Quick Printing of 4 × 6-inch Snapshots
After inserting a memory card, you can view and select the photos you want to 
print from the RX700 screen....

30Making Prints From Your Digital Camera
Note: 
If your camera supports DPOF, you can use it to select the photos you want to print 
and the number of copies. For more information, see page 34.
6. When done selecting all your photos for printing, press OK. 
7. At the preview screen, press the x 
Color button to print your photos.
Note: 
Press the Options button if you’d like to print the date and/or time your photo was 
taken. Select the desired format, then press 
OK.
To cancel printing, press the y...