Epson Projector Z8150NL User Manual

							Network Menu
81
Wired LAN Menu
Sub Menu
Function
DHCPYou can set whether or not (On/Off) to use DHCP
g.
If this is set to On you cannot set any static IP addresses.
IP AddressYou can input the IP address
g assigned to the projector.
You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Subnet MaskYou can input the Subnet Maskg for the projector. You can input a number from 0 to 255 in each field of the address. However, the 
following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway AddressYou can input the IP address for the gateway for the projector.
You can input a number from 0 to 255 in each field of the address. However, the following Gateway addresses
g cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
IP Address DisplayTo prevent the IP address from being displayed on the LAN Standby screen, set this to Off. 
						

							Network Menu
82
Administrator Settings Menu
Sub Menu
Function
Administrator PasswordThis is the password for the Administrator settings menu of network settings.
You can enter up to 16 single-byte alphanumeric characters.
If the administrator password is not set, click OK with an empty password box.
Network Host NameYou can enter up to 15 single-byte alphanumeric characters.
PJLink PasswordSet a password to use when you access the projector using compatible PJLink software. sp.135
You can enter up to 32 single-byte alphanumeric characters.
Web Control PasswordSet a password to use when making settings and controlling the projector using Web Control. You can enter up to 8 single-byte 
alphanumeric characters. Web Control is a computer function that allows you to set up and control the projector by using the Web 
browser on a computer connected on a network. sp.127
Monitor PasswordYou can enter up to 16 single-byte alphanumeric characters.
Secure HTTPApply security (HTTPS) to Web Control. To set security by Web control, it is recommended to set it On.
Mail NotificationGoes to the Mail Notification setting menu. sp.84
Manage CertificatesGoes to the Manage Certificates settings menu. sp.85
SNMPGoes to the SNMP settings menu. sp.87
Priority GatewayFor the priority gateway, select either Wired or Wireless. 
						

							Network Menu
83
AMX Device DiscoveryWhen the projector is connected to a network, set this to On to allow the projector to be detected by AMX Device Discovery
g. Set 
this to Off if you are not connected to an environment controlled with a controller from AMX or AMX Device Discovery.
Crestron RoomViewSet this parameter to On only when using Crestron RoomView® to monitor and control the projector over a network. Normally, 
leave this parameter set to Off. s"About Crestron RoomView®" p.136
Changes in projector settings take effect upon restarting.
The following functions cannot be used when it is set to On.
•Web Control
•Message Broadcasting (EasyMP Monitor plugin)
BonjourTo connect to the network by Bonjour, set it to On. For an explanation of the Bonjour service, see the Apple Web site.
http://www.apple.com/
EPSON Message 
BroadcastingYou can switch the EPSON Message Broadcasting function to enable or disable.
Download the software and the User’s Guide from the following website.
http://www.epson.com
You can download Message Broadcasting and its Operation Guide from the following Web site.
http://www.epson.com
Sub Menu
Function 
						

							Network Menu
84
Mail Notification menu
When this is set, you receive an e-mail notification if a problem or warning occurs in the projector. s"Reading Problem Mail Notification Function" 
p.131
Sub Menu
Function
Mail NotificationYou can set whether or not (On/Off) to be notified by e-mail.
SMTP ServerYou can input the IP address
g for the SMTP server for the projector.
You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Port NumberYou can input the port number for the SMTP server. The default value is 25. You can input numbers between 1 to 65535.
Email Address 1/Email 
Address 2/Email Address 
3You can input the e-mail address of the destination to send the notification e-mail to. You can register up to three destinations. You 
can enter up to 64 single-byte alphanumeric characters for the e-mail addresses. You cannot enter more than 32 characters on the 
configuration menu. When setting from Web Control, you can enter more than 32 characters. sp.127
Setting a Notification 
EventYou can select the problems or warnings to be notified about by e-mail. When the selected problem or warning occurs in the 
projector, an e-mail is sent to the specified Email Address notifying that a problem or warning has occurred. You can select 
multiple items from the displayed items. Sender is Email Address 1. 
						

							Network Menu
85
Manage Certificates menu
Sub Menu
Function
Client Certificate Issued to/Issued by/Validity period
Displays the information set in the stored client certificate. It is blank if the certificate is not set. You must set the certificate if you 
use PEAP-TLS and EAP-TLS.
Select Clear to delete the stored certificate.
CA certificate Issued to/Issued by/Validity period
Displays the information set in the stored CA certificate. It is blank if the certificate is not set. You must set the certificate if you use 
EAP to authenticate the authentication server certificate.
Select Clear to delete the stored certificate.
Self-signed Certificate Issued to/Issued by/Validity period
When Secure HTTP is set to On, information on the certificate maintained by the server function in the projector is displayed. It is 
not displayed if Web Server Certificate is set.
Select Refresh to update the self-signed certificate.
Web Server Certificate Issued to/Issued by/Validity period
Displays information on the certificates set in the projector, which are needed when Secure HTTP is set to On. It is not displayed if 
Self-signed Certificate is set.
Select Clear to delete the stored certificate. 
						

							Network Menu
86
q
Web Control is used to set certificates. s"Setting Certificates" p.129 
						

							Network Menu
87
SNMP menu
To use SNMP to monitor the projector, you need to install the SNMP manager program on your computer. SNMP should be managed by a network 
administrator.
Sub Menu
Function
SNMPSet this parameter to On when using SNMP
g to monitor the projector.
Trap IP Address 1/Trap IP 
Address 2When SNMP is set to On, you can set up to two IP addresses as SNMP trap notification destinations.
You can input a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Community NameSet the community name of SNMP. You can enter up to 32 single-byte alphanumeric characters. 
						

							Network Menu
88
Reset Menu
Resets all of the network settings.
Sub Menu
Function
Reset network settings.To reset all of the network settings, select Yes.
When you reset the network settings, the Passphrase, Administrator Password and Manage Certificates menu settings change back 
to their default values, and the certificates are deleted.
After you reset all the settings, the Basic menu appears. 
						

							Info Menu (Display Only)
89
Info Menu (Display Only)
Lets you check the status of the image signals being projected and the status of the projector. Items that can be displayed vary depending on the image 
signal or input source being projected as shown in the following screen shots.
RGB Signal/Component Video
g Signal Composite video
g Signal/S-Video
g Signal LAN
Sub Menu
Function
Lamp HoursYou can display the cumulative lamp operating time
*.
When it reaches the lamp warning time, the characters are displayed in yellow.
Lamp StatusThe following icons show the status of the lamps.
 : Lighted  : Disable
When   is displayed, the lamp is not operating normally. See "Reading the Indicators". sp.96
SourceYou can display the Source name for the connected equipment currently being projected.
Input SignalYou can display the Input Signal selected in the Signal menu.
ResolutionYou can display the Resolution.
Video SignalYou can display the Video Signal selected in the Signal menu.
Refresh RateYou can display the Refresh Rate
g.
Sync InfoYou can display the image signal information.
This information may be needed if service is required. 
						

							Info Menu (Display Only)
90
* The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours and above is displayed as "10H", "11H", etc. If you are using PowerLite Pro 
Z8250NL/Z8255NL/Z8350WNL/Z8450WUNL/Z8455WUNL, the lamp operating times of both power consumption mode and normal mode are displayed. StatusThis is information about errors that have occurred on the projector.
This information may be needed if service is required.
Serial NumberDisplays the projector's serial number.
Event IDWhen problems occur when the projector and computer are connected through the network, information on the problem is 
displayed using an Event ID. Refer to the following page for information on interpreting the Event ID. sp.112
Sub Menu
Function