Epson Projector Z8150NL User Manual

Image Menu
61
* This item cannot be set if Edge Blending is set to On. Abs. Color Temp.You can adjust the overall tint of the image. You can adjust tints in 10 stages from 5000 K to 10000 K. When a high value is selected, 
the image becomes tinged with blue, when a low value is selected, the image becomes tinged with red.
AdvancedYou can make adjustments by choosing the following items.
Gamma: You can select one of the gamma correction values, or customize your own setting from your image or a displayed...

Signal Menu
62
Signal Menu
Items that can be set vary depending on the image signal or input source currently being projected as shown in the following screen shots. Setting details 
are saved for each image signal. 

Signal Menu
63
You cannot change settings in the Signal menu other than Scale when projecting from a network source.
* PowerLite Pro Z8450WUNL/Z8455WUNL onlyRGB Signal Component Video Signal
g
Composite video Signal
g/S-Video 
Signal
g
HDMI/SDI
*
Sub Menu
Function
Auto SetupYou can select whether or not (On/Off) Auto Setup automatically adjusts the image to the optimum state when the input signal 
changes.
Resolution Auto: The resolution of the input signal is automatically identified.
Wide, Normal: If...

Signal Menu
64
* PowerLite Pro Z8450WUNL/Z8455WUNL onlyFrame Interpolation
*
You can play fast moving images smoothly by producing intermediate frames between the original frames.
Super-resolutionSharpens the image of a low resolution or blurry picture.
Noise ReductionSmoothes out rough images. There are two modes. Select your favorite setting. It is recommended that this is set to Off when 
viewing image sources in which noise is very low, such as for DVDs.
Mosquito NRYou can reduce the wavy noise that...

Settings Menu
65
Settings Menu
Sub Menu
Function
Geometric CorrectionYou can correct distortion.
H/V-Keystone: Corrects horizontal and vertical keystone distortion. Select one of V-Keystone or H-Keystone. sp.164
Use the [w/], [v/], [/ ] buttons on the control panel to perform similar corrections to V-Keystone and 
H-Keystone.
Quick Corner: Selects and corrects the four corners of the projected image. sp.162
Arc Correction: Fine adjustment of the curved distortion caused by slack or shrinkage of the...

Settings Menu
66
* Not available on PowerLite Pro Z8150NLPower Consumption
*
You can set the lamp brightness to Normal 1, ECO, or Normal 2.
Normal 1: Projects at normal brightness.
You can change the lamp brightness in Multi-Projection - Brightness Level from the Extended menu. sp.67
ECO: Select this if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. 
When ECO is selected, the amount of electricity consumed and the fan rotation noise during...

Extended Menu
67
Extended Menu
Sub Menu
Function
DisplayYou can make settings related to the projector's display.
Menu Position: Select the position to display the menu on the projected screen.
Messages: The following messages are not displayed on the screen when this item is set to Off.
Overheating and other warnings, messages such as when there is no video input, and when Freeze is On or when changing Source, 
Color Mode or Aspect.
Display Background
*1: You can set the screen status for when there...

Extended Menu
68
Operation Direct Power On: You can set whether or not (On/Off) to enable Direct Power On.
Be careful when this item is set to On because this unit turns on at the time of power recovery with this unit plugged-in to an outlet.
Sleep Mode: When set to On, this automatically stops projection when no image signal is being input and no operations are carried 
out.
Sleep Mode Timer: When Sleep Mode is set to On, you can set the time before the projector automatically turns off within a range...

Extended Menu
69
*1 When User's Logo Protect is set to On in Password Protect, settings relating to User's Logo cannot be changed. You can make changes after setting User's Logo 
Protect to Off. sp.45
*2 Except for parameters related to the user's logo
*3 Except for High Altitude Mode and Remote Control Type
*4 Except for Multi-screen and Projector ID Multi-ProjectionYou can adjust the settings when projecting images from multiple projectors. sp.173
Brightness Level (not available on...

Network Menu
70
Network Menu 
When Network Protect is set to On in Password Protect, a message is displayed and the settings cannot be changed. You can make changes after setting 
Network Protect to Off. sp.45
q
By using the Web browser of a computer connected to the projector on a network, you can set the projector's functions and control the projector. This function is 
called "Web Control". You can easily enter text using a keyboard to make settings for "Web Control" such as...