Epson Projector Z8150NL User Manual

Using the Mail Notification Function to Report Problems
131
Using the Mail Notification Function to Report Problems
By setting the Mail Notification function from the projector's 
Configuration Menu, notification messages will be sent to the preset 
email addresses when a problem or warning occurs with a projector. This 
will enable the operator to be notified of problems with projectors even at 
locations away from the projectors. sNetwork Menu - Administrator 
Settings - Mail Notification p.84
q...

Management Using SNMP
132
Management Using SNMP
By setting SNMP from the projector's configuration menu, notification 
messages are sent to preset e-mail addresses when a problem or warning 
occurs with a projector. This is useful when controlling projectors 
centrally at a point distant from them. sp.87
q
•SNMP should be managed by a network administrator or someone who is 
familiar with the network.
•To use the SNMP function to monitor the projector, you need to install the 
SNMP manager program on...

ESC/VP21 Commands
133
ESC/VP21 CommandsSerial Connection
•Connector shape: D-Sub 9-pin (male)
•Projector input port name: RS-232C
Communications Protocol
•Default baud rate setting: 9600 bps
•Data length: 8 bit
•Parity: None
•Stop-bit: 1 bit
•Flow control: None
Command List
When the power ON command is transmitted to the projector, the power 
turns on and it enters warm-up mode. When the projector's power has 
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector...

ESC/VP21 Commands
134
If the command being processed terminates abnormally, an error 
message is output and a ":" is returned.
Add a Carriage Return (CR) code (0Dh) to the end of each command and 
transmit.
Item
Command
Power ON/OFF On PWR ON
Off PWR OFF
Signal selection Computer Auto SOURCE 1F
RGB SOURCE 11
Component SOURCE 14
BNC Auto SOURCE BF
RGB SOURCE B1
Component SOURCE B4
HDMI1 SOURCE 30
HDMI2 SOURCE A0
SDI
(PowerLite Pro Z8450WUNL/
Z8455WUNL only)SOURCE 60
Video SOURCE 45
S-Video SOURCE...

About PJLink
135
About PJLink
PJLink Class1 was established by the JBMIA (Japan Business Machine 
and Information System Industries Association) as a standard protocol 
for controlling network-compatible projectors as part of their efforts to 
standardize projector control protocols.
The projector complies with the PJLink Class1 standard established by 
the JBMIA.
It complies with all commands except for the following commands 
defined by PJLink Class1, and agreement was confirmed by the PJLink 
standard...

About Crestron RoomView®
136
About Crestron RoomView®
Crestron RoomView® is an integrated control system provided by 
Crestron®. It can be used to monitor and control multiple devices 
connected on a network.
The projector supports the control protocol, and can therefore be used in 
a system built with Crestron RoomView®.
Refer to the Crestron® website for details on Crestron RoomView®. (Only 
English-language displays are supported.)
http://www.crestron.com
An overview of Crestron RoomView® is provided...

About Crestron RoomView®
137
Using the operation window
* This projector does not support the control of audio.A
The following operations will be performed when the buttons are 
clicked.
Button
Function
PowerTurns the projector power on or off.
ShutterYou can use this when you want to focus the 
audience’s attention on what you are saying, or 
if you do not want to show details such as when 
you are changing between files during 
presentations from a computer. sp.39
B
Switch to the image from the...

About Crestron RoomView®
138
AutoIf clicked when a computer analog RGB signal is 
being projected, automatically optimizes the 
image by adjusting the Tracking, Sync., and 
Zoom Position.
SearchSwitches to the image from the input port where 
video signals are being input. sp.25
EscPerforms the same operation as the [Esc] button 
on the remote control. sp.19E
The following operations will be performed when the tabs are clicked.
Tab
Function
Contact IT HelpDisplays the Help Desk window. Used to send 
and...

About Crestron RoomView®
139
Using the tools window
The following window will be displayed if the Tools tab is clicked in the 
operation window. This window is used to change the settings in the 
projector that is currently connected.
A
Crestron Control
Makes settings for Crestron® central controllers.
B
Projector
The following items can be set.
Item 
Function
Projector NameEnter a name to differentiate the projector that is 
currently connected from other projectors on 
the network. (The name can...

About Crestron RoomView®
140
C
Admin Password
Select the Enabled check box to require a password to open the Tools 
window.
The following items can be set.
Item
Function
New PasswordEnter the new password required to open the 
Tools window. (The password can contain up to 
26 single-byte alphanumeric characters.)
ConfirmEnter the same password you entered in New 
Password. If the passwords are not the same, an 
error will be displayed.
SendClick this button to commit changes made to the 
Admin Password....