Epson Projector Z8150NL User Manual

Settings for Multiple Projectors
181
Make the following settings on the Multi-Projection menu to correct the 
image.
q
If the overlapping part of dark images is brighter than the rest of the image, 
adjust the Black Level again.
Displays the Image Partly Enlarged (Scale)
ProcedureA
During projection, press the [Menu] button. Select Signal 
menu - "Scale" and then press the [Enter] button. s"Using 
the Configuration Menu" p.55
B
Select "Scale", and then select "On".
Sub...

Settings for Multiple Projectors
182
C
Select "Scale Mode", and then select the scale.
D
Select one of the scaling options, and then adjust the scale.
Adjusting the row with the "−" and "+" sign allows you to scale both 
horizontally and vertically at the same time. You can also scale in 
one direction by selecting "Scale Vertically" or "Scale Horizontally".
E
Set "Image Display Range".
Adjust this setting while watching the screen. The clipping values...

Setting Schedule
183
Setting Schedule
You can schedule turning the projector power on/off and switching the 
input source, as events in the schedule. Registered events are executed 
automatically at the specified time on the specified dates or weekly.
Setting Methods
You can make settings from the computer by using the Web Remote 
function. sp.127
ProcedureA
Press the [Menu] button, and select Extended - 
"Time/Schedule Settings" from the configuration menu. 
s"Using the Configuration...

Setting Schedule
184
ClockDaylight Saving Time screen
Schedule
You can display the list of registered schedules.
When you select Edit on a registered schedule or New Event, the Clock / 
Schedule Setting screen is displayed.
You can register up to 30 events.
Clock / Schedule Setting screen
Sub Menu
Function
DateSet today's date in the projector.
TimeSet the current time in the projector.
Time Difference 
(UTC)Set the time difference from Coordinated 
Universal Time.
Change DST SettingsDisplays the...

Connecting to External Equipment
185
Connecting to External EquipmentConnecting a LAN Cable
Connect with a commercially available 100BASE-TX or 10BASE-T LAN 
cable.
Caution
To prevent malfunctions, use a category 5 shielded LAN cable.Connecting to an External Monitor
You can display computer on an external monitor connected to the 
projector and the projection screen at the same time. You can check 
projected images on an external monitor when giving presentations even 
if you cannot see the screen....

Installing Optional and Supplied Accessories
186
Installing Optional and Supplied Accessories
Prepare #2 plus-driver in advance.
Removing and Attaching the Projector Lens UnitRemovingCaution•Only remove the lens unit when necessary. If dust or dirt enter the projector, 
projection quality deteriorates and it could cause a malfunction.
•Try not to touch the lens with your hand or fingers.
If fingerprints or oils are left on the surface of the lens, projection quality 
deteriorates.
•Before replacing the...

Installing Optional and Supplied Accessories
187
B
Remove the front cover.
C
Pinch the lock lever of the lens unit and turn it 
counterclockwise.
D
Once it is released, pull the lens unit straight out.
AttachingCautionDo not remove or attach the lens unit when the projector's lens area is facing up. Dust 
or dirt could enter the projector.
A
Loosen the two screws.
B
Loosen the screw. (Thumb screw available on PowerLite Pro 
Z8255NL/Z8455WUNL only.)
C
Pull the cover straight out. 

Installing Optional and Supplied Accessories
188
Procedure
A
Insert the lens unit straight into the lens insertion section 
with the white circle on the lens on top.
B
While holding the lens unit firmly, turn the lock lever 
clockwise until it is locked. Check that the lens cannot be 
detached. 

Installing Optional and Supplied Accessories
189
C
Replace the front cover.
D
Replace the interface cover.
Caution
•Install the front cover before using the projector.
•Store the projector with the lens unit installed.
If the projector is stored without the lens unit, dust and dirt may get inside the 
projector and cause malfunctions or lower the quality of projection.
A
Install the cover along the guide.
B
Tighten the screw. (Thumb screw available on the PowerLite Pro 
Z8255NL/Z8455WUNL only.)
C
Tighten...

Installing Optional and Supplied Accessories
190
Installing the Wireless LAN Unit (V12H418P12)Attaching
ProcedureA
Remove the interface cover.
B
Install the Wireless LAN unit.
After connecting the wireless LAN module to the projector, set the 
Wireless LAN Power setting on the Wireless LAN menu to On. (The 
default setting is On.)sp.74
Reading the wireless LAN indicators
There are two wireless LAN indicators, one on the projector and one on 
the Wireless LAN unit.
A
Loosen the screw. (Thumb screw...