Epson Projector PowerLite Pro G6470WU User Manual

1. To prevent unauthorized use of the projector, select
Power On Protection, pressEnter, selectOn,
press Enter again, and press Esc.
2. To prevent changes to the Users Logo screen or related display settings, select Users Logo
Protection, press Enter, selectOn, pressEnteragain, and press Esc.
3. To prevent changes to network settings, select Network Protection, pressEnter, selectOn, press
Enter again, and press Esc.
4. To prevent changes to the projectors time or schedule settings, select Time/Schedule...

1. Press and hold down the
Numbutton on the remote control while you enter the password using the
numeric buttons.
Note: The default password is 0000.
The password screen closes.
2. If the password is incorrect, the following may happen: • You see a wrong password message and a prompt to try again. Enter the correct password toproceed.
• If you enter an incorrect password several times in succession, the projector displays a request code and a message to contact Epson Support. Do not attempt to enter the...

2. Press the
Menubutton, select the Extendedmenu, and press Enter.
3. Select the Users Logosetting and press Enter.
You see a prompt asking if you want to use the displayed image as a users logo.
4. Select Yesand press Enter.
You see a selection box overlaying your image.
5. Use the arrow buttons on the remote control to surround the image area you want to use as the Users Logo and press Enter.
You see a prompt asking if you want to select this image area.
6. Select Yesand press Enter. (If you want to...

You see the Users Logo zoom factor menu.
7. Select a zoom percentage and press Enter.
You see a prompt asking if you want to save the image as the Users Logo.
8. Select Yesand press Enter.
You see a completion message.
9. Press Escto exit the message screen.
10. Select the Extendedmenu and press Enter.
11. Select Displayand press Enter.
12. Select when you want to display the Users Logo screen: • To display it whenever there is no input signal, select Display Backgroundand set it toLogo.
• To display it...

2. Select the
Settingsmenu and press Enter.
3. Select the Control Panel Lock setting and pressEnter.
4. Select one of these lock types and press Enter:
• To lock all of the projectors buttons, select Full Lock.
• To lock all buttons except the power button, select Partial Lock.
You see a confirmation prompt.
5. Select Yesand press Enter.
Unlocking the Projectors Buttons
Parent topic: Projector Security Features
Unlocking the Projectors Buttons If the projectors buttons have been locked, hold the...

• Use the security slot on the projector to attach a Kensington lock. See your local computer or
electronics dealer for purchase information.
• Use the security cable attachment point on the projector to attach a wire cable and secure it to a room fixture or heavy furniture.
Note: Do not pass drop-prevention cables through the security cable attachment point when mounting
the projector on a wall or ceiling.
Parent topic: Projector Security Features
Related references
Projector Parts - Rear
Projecting Two...

1. Press the
Splitbutton on the remote control.
The currently selected input source moves to the left side of the screen.
2. Press the Menubutton.
You see this screen:
3. To select an input source for the other image, select the Sourcesetting, press Enter, select the
input source, select Execute, and press Enter. (You can also change image sources, if necessary.)
4. To switch the images, select the Swap Screenssetting and press Enter.
5. To change the image sizes, select the Screen Sizesetting, press...

7. To exit the split screen feature, press the
SplitorEsc button.
Parent topic: Adjusting Projector Features
Using Multiple Projectors You can combine the projected images from two or more projectors to create one large image. The
following two options are available:
• Project different images from each projector and create one seamless image
• Project the same image from each projector and use the Scale feature to create one seamless image
148   

Follow the instructions in these sections to setup and project from multiple projectors.
Projector Identification System for Multiple Projector Control
Adjusting the Position of the Projected Image From Multiple Projectors
Scaling an Image
Adjusting the Lamps Brightness
Blending the Image Edges
Adjusting the Black Level
Matching the Image Colors
Parent topic:
Adjusting Projector Features
Projector Identification System for Multiple Projector Control You can operate multiple projectors using one remote...

4. Select
Projector ID and pressEnter.
5. Use the arrow buttons on the remote control to select the identification number you want to use for the projector. Then press Enter.
Repeat these steps for all the other projectors you want to operate from one remote control.
Parent topic: Projector Identification System for Multiple Projector Control
Setting the Remote Control ID The remote controls ID is set to 0by default so it can operate any compatible projector. If you want to set
the remote control to...