Epson Projector PowerLite Pro G6470WU User Manual

Setting
OptionsDescription
Video Signal AutoSpecifies the signal type from the
input sources connected to the
Various video standards
video ports
Auto: detects signals
automatically
Aspect See the list of available aspect Sets the aspect ratio (width-to-
ratiosheight ratio) for the selected input
source
Scale Various scale optionsWhen using multiple projectors to
project one image, adjusts the
scale of the image displayed by
each projector
Overscan AutoChanges the projected image
ratio to make the edges...

Projector Feature Settings - Settings Menu
Options on the Settings menu let you customize various projector features.
182 

Setting
OptionsDescription
Geometric Correction H/V-KeystoneAdjusts the projected image
shape
Quick Corner
H/V Keystone: lets you manually
Arc Correction
correct the angles of the
(PowerLite Pro horizontal and vertical sides
G6070W/G6170/G6270W/G6470 Quick Corner: select to adjust
WU/G6570WU/G6770WU/)
the position of the four corners
Point Correction Arc Correction: select to adjust
Curved Surface the curve or arc of the horizontal
and vertical sides
(PowerLite Pro
G6870/G6970WU) Point Correction: select...

Setting
OptionsDescription
Power Consumption NormalSelects the brightness mode of
the projector lamp
Temp Interlock
Normal: sets maximum lamp
ECO
brightness
Temp Interlock: automatically
dims the lamp if the surrounding
temperature is too high for
normal operation
ECO: reduces lamp brightness
and fan noise, and saves power
and lamp life
Volume Varying levels available Adjusts the volume of the
projector’s speaker system
Remote Receiver Front/RearLimits reception of remote control
signals by the selected...

Parent topic:
Adjusting the Menu Settings
Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup features that control its
operation.
Setting OptionsDescription
Display —See the next table in this topic
Closed Caption OffControls use of closed captions
and selects the closed caption
CC1
type (closed captions are only
CC2 visible for NTSC signals
connected through the S-Video
or Video ports)
Users Logo —Creates a screen that the
projector displays...

Setting
OptionsDescription
Projection FrontSelects the way the projector
faces the screen so the image is
Front/Ceiling
oriented correctly
Rear
Rear Ceiling
Direction Varying levels available Selects the installation angle for
the projector; the projectors fan
may get louder depending on the
direction angle selected
Operation —See the last table in the topic
A/V Settings A/V OutputSelects various audio and video
output settings
Monitor Out
A/V Output: select to output
Audio Settings
audio and video to an...

Setting
OptionsDescription
Standby Mode Communication OnEnable this setting to allow the
following operations to occur
Communication Off
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Output audio and video to an external device (A/V Output
must be set to Always On)
• Communication from the HDBaseT port (Control
Communications must be set
to On)
HDBaseT Control CommunicationsSelects the communication
settings for connections to an
Extron XTP
HDBaseT...

Setting
OptionsDescription
Multi-Projection Brightness LevelSelect various options when
projecting from multiple
(not available for PowerLite Pro
projectors
G6470WU)
Brightness Level: adjusts the
Edge Blending
brightness of the lamp;Power
Multi-screen Consumptionin the Settings
menu must be set to Normalto
Projector ID
use this setting
Edge Blending: blends the
border between multiple images
to create a seamless screen
Multi-screen: adjusts the tint and
brightness of each projected
image
Projector ID:...

Setting
Description
Display Background Selects the screen color or logo to display when no
signal is received
Startup Screen Controls whether a special screen appears when
the projector starts up
A/V Mute Selects the screen color or logo to display when
A/V Mute is turned on
Standby Confirmation Displays a confirmation message after pressing
theStandby button on the remote control
Air Filter Notice Displays a message when a clog in the air filter is
detected
Screen Sets the aspect ratio and position of...

Setting
OptionsDescription
BNC Sync Termination —Sets the termination for the signal
from the BNC port (normally
should be off unless analog
termination such as for switchers
is necessary)
Remote Control Type NormalSelectNormal to use the remote
control that came with the
Simple
projector orSimpleto use a
different Epson projector remote
control and disable the remote
control that came with the
projector
Inv Direction Button —Enable this setting if you installed
the projector on a ceiling and
want to...