Epson Projector PowerLite Pro G6470WU User Manual

3. Connect the other end to any available USB port on your computer.
4. Press and hold the
Escbutton on the control panel or remote control as you connect the power cord
to the projectors power inlet.
5. When the power, Lamp, and Temp lights turn orange, release the Escbutton.
The projector shows up as a removable disk on your computer.
6. Open the removable disk and copy the pjconfdata.binfile to your computer.
7. Once the file has copied, do one of the following: •Windows: Open theMy Computer,...

• OS X 10.6.x
• OS X 10.7.x
• OS X 10.8.x
• OS X 10.9.x
• OS X 10.10.x
Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have
to repeat your adjustments.
1. Turn off the projector and unplug the power cord from the projectors power inlet.
2. Connect a USB cable to your projectors
Serviceport.
3. Connect the other end to any available USB port on your computer.
4. Press and hold the Menubutton on the control panel or remote control as you connect the...

5. When the power, Lamp, and Temp lights turn orange, release the
Menubutton.
The projector shows up as a removable disk on your computer.
6. Copy the pjconfdata.bin file from your computer to the removable disk.
Note: Do not copy any other files to the removable disk.
7. Once the file has copied, do one of the following: •Windows: Open theMy Computer, Computer, orWindows Explorer utility. Right-click the
name of your projector (listed as a removable disk) and select Eject.
• OS X: Drag the removable...

Adjusting the Menu Settings
Follow the instructions in these sections to access the projector menu system and change projector
settings.
Using the Projectors Menus
Image Quality Settings - Image Menu
Input Signal Settings - Signal Menu
Projector Feature Settings - Settings Menu
Projector Setup Settings - Extended Menu
Projector Network Settings - Network Menu
Projector Information Display - Info Menu
Projector Reset Options - Reset Menu
Using the Projectors Menus You can use the projectors menus to...

You see the menu screen displaying the Image menu settings.
2. Press the up or down arrow button to move through the menus listed on the left. The settings for each menu are displayed on the right.
Note: The available settings depend on the current input source.
3. To change settings in the displayed menu, press Enter.
4. Press the up or down arrow button to move through the settings.
5. Change the settings using the buttons listed on the bottom of the menu screens.
6. To return all the menu settings to...

Image Quality Settings - Image Menu
Settings on the Image menu let you adjust the quality of your image for the input source you are currently
using. The available settings depend on the currently selected input source.
To change settings for an input source, make sure the source is connected and select that source.
Setting OptionsDescription
Color Mode See the list of available Color Adjusts the vividness of image
Modescolors for various image types
and environments
Brightness Varying levels available...

Setting
OptionsDescription
Sharpness Varying levels available Adjusts the sharpness or
softness of image details
Color Temp. (absolute color Varying levels available Sets the color tone based on
temperature) color temperature
Advanced Various options available Adjusts the gamma levels and
intensity of individual hues in the
image
Auto Iris OffAdjusts the projected luminance
based on the image brightness
Normal
when certain Color Modes are
High Speed selected
Note: TheBrightness setting does not affect...

Input Signal Settings - Signal Menu
Normally the projector detects and optimizes the input signal settings automatically. If you need to
customize the settings, you can use the Signal menu. The available settings depend on the currently
selected input source.
Note:You can restore the default settings of the Position,Tracking, and Syncsettings by pressing the
Auto button on the remote control.
To change settings for an input source, make sure the source is connected and select that source. Setting...

Setting
OptionsDescription
Resolution AutoSets the input signal resolution
from an analog RGB computer
Normal
connection
Wide Auto: detects the resolution
Manual automatically
Normal: for 4:3 or 5:4 screens
Wide: for widescreen
Manual: allows you to specify a
resolution
Tracking Varying levels available Adjusts signal to eliminate
vertical stripes in images from an
analog RGB computer
connection
Sync. Varying levels available Adjusts signal to eliminate
fuzziness or flickering in images
from an analog...

Setting
OptionsDescription
Frame Interpolation OffSmooths fast moving video by
comparing consecutive frames
(PowerLite Pro G6470WU/ Low
and inserting an intermediate
G6570WU/G6770WU/G6970WU Normalframe between them
)
High
Noise Reduction OffReduces flickering in analog
images in two levels; cannot be
NR1
set if Image Processing is set to
NR2 Fast
Mosquito NR OnReduces the noise or artifacts
seen around the edges of objects
Off
that is caused by the
decompression of MPEG video;
cannot be set if Image...