Epson Projector PowerLite 5040UB User Manual

							

51
Setting
 Options
 Description

Passphrase
 —
 For
theselected security,selects
 the
pre-shared passphrase used
 on
the network
 Parent
topic:Enabling WPAorWPA2 Security
 Selecting
ExternalNetworkDetection Settings
 If
you areusing acompatible networkcontrolsystem, youcanselect settings thatallow yourprojector to
 be
detected bythose systems.
 1.
Press theMenu button.
 2.
Select theNetwork menuandpress Enter.
 3.
Select Network Configuration andpress Enter.
 4.
Select theOthers menuandpress Enter.
 5.
Ifyour network environment usesanAMX controller, turnonthe AMX Device Discovery settingto
 allow
theprojector tobe detected.
 6.
Ifyour network environment usesaControl4 orControl4 SDDPcontroller, turnonthe Control4
 SDDP
setting toallow theprojector tobe detected.
 7.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus. 
						

							

52
Parent
topic:UsingtheProjector onaNetwork 
						

							

53
Using
BasicProjector Features
 Follow
theinstructions inthese sections touse your projectors basicfeatures.
 Turning
Onthe Projector
 Turning
Offthe Projector
 Viewing
3DImages
 Selecting
theLanguage forthe Projector Menus
 Adjusting
theImage Height
 Adjusting
theImage Position UsingLensShift
 Image
Shape
 Resizing
theImage withtheZoom Feature
 Focusing
theImage withtheLens Button
 Remote
ControlOperation
 Selecting
anImage Source
 Projection
Modes
 Image
Aspect Ratio
 Color
Mode
 Turning
Onthe Projector
 Turn
onthe computer orvideo equipment youwant touse before youturn onthe projector soitcan
 display
theimage source.
 1.
Connect thepower cordtothe projectors powerinlet.  
						

							

54
2.
Plug thepower cordintoanelectrical outlet.
 Note:
WithDirect Power Onturned on,theprojector turnsonassoon asyou plug itin.
 The
projectors powerlightturns blue.Thisindicates thattheprojector isreceiving power.
 3.
Press thepower button onthe projector orthe Onbutton onthe remote controltoturn onthe
 projector.

The
shutter opensandthestatus lightflashes blueasthe projector warmsup.Once theprojector is
 warmed
up,thestatus lightstops flashing andturns blue.
 Warning:
Neverlookintotheprojector lenswhen thelamp ison. This candamage youreyes andis
 especially
dangerous forchildren.
 If
you donot see aprojected imagerightaway, trythe following:
 •
Turn onthe connected computerorvideo device.
 •
Insert aDVD orother video media andpress theplay button, ifnecessary.
 •
Press thesource buttononthe projector todetect thevideo source, orpress asource buttononthe
 remote
control.
 •
Ifthe Home screen isdisplayed, selectthesource youwant toproject.
 Using
theHome Screen
 Parent
topic:UsingBasicProjector Features
 Related
references
 Projector
SetupSettings -Extended Menu
 Using
theHome Screen
 You
canselect inputsources andother frequently usedoptions fromtheHome screen.
 1.
Todisplay theHome screen, doone ofthe following:
 •
Press theHome button onthe remote control.
 •
Turn onthe projector withtheHome Screen AutoDispsetting enabled.
 •
Turn onthe projector whennosignal isreceived fromtheselected inputsource. 
						

							

55
2.
Press thearrow buttons onthe remote controlorcontrol paneltonavigate thescreen, andpress
 Enter
toselect anoption.
 1
 Select
thevideo source youwant toproject
 2
 Display
theQR code
 3
 Display
theprojector s menus
 4
 Select
customizable menuoptions
 5
 Select
tochange the3Dsettings
 6
 Select
tochange theColor Mode
 Note:
Youcanselect thecustomizable menuoptions usingtheCustom Function 1and Custom
 Function
2settings inthe Extended menu.
 3.
Press theHome button tohide theHome screen.
 Parent
topic:Turning Onthe Projector
 Related
references
 Projector
SetupSettings -Extended Menu 
						

							

56
Turning
Offthe Projector
 Before
turning offthe projector, shutdown anycomputer connected toitso you canseethecomputer
 display
duringshutdown.
 Note:
Turnoffthis product whennotinuse toprolong thelifeofthe projector. Lamplifewill vary
 depending
uponmode selected, environmental conditions,andusage. Brightness decreasesovertime.
 Note:
When usingtheBlank feature, theprojector lampisstill on.Toturn offthe lamp, turnoffthe
 projector.

1.
Press thepower button onthe projector orthe Standby buttononthe remote control.
 The
projector displaysashutdown confirmation screen.
 2.
Press thepower button onthe projector orthe Standby buttononthe remote controlagain.(To
 leave
iton, press anyother button.)
 The
lamp turns offand thelens shutter closes. Theprojectors statuslightflashes andthen turns off. 
						

							

57
3.
Totransport orstore theprojector, makesurethestatus lightisoff, then unplug thepower cord.
 Caution:
Toavoid damaging theprojector orlamp, never unplug thepower cordwhen thestatus
 light
ison orflashing.
 Parent
topic:UsingBasicProjector Features
 Related
tasks
 Shutting
Offthe Picture Temporarily
 Transporting
theProjector
 Viewing
3DImages
 You
canview 3Dimages usingyourprojector. Viewing3Dimages requires a3D-compatible video
 device,
acompatible HDMIcable, andapair ofEpson RF3Dglasses (notincluded withyour projector).
 You
canalso convert 2Dimages to3D using the2D-to-3D Conversion settinginyour projectors
 Signal
>3D Setup menu.
 You
canpurchase EpsonRF3Dglasses fromanEpson authorized reseller.Tofind thenearest reseller,
 call
800-GO-EPSON (800-463-7766).Oryou canpurchase onlineatepsonstore.com (U.S.sales) or
 epson.ca
(Canadian sales).
 Note:
Makesurethe3DDisplay settingonthe Signal menuisset toAuto or3D .
 1.
Connect a3D-compatible videodevice tothe projector usingacompatible HDMIcable.
 2.
Turn onthe video device, thenturnonthe projector.  
						

							

58
3.
Begin playback fromthevideo device.
 Note:
Makesureyousetthe video device toplay content in3D mode.
 4.
Slide thepower switch onthe 3Dglasses tothe Onposition.
 5.
Putonthe 3Dglasses. Ifyou donot see a3D image, pairtheglasses withtheprojector.
 Note:
Ifyou change thevideo source oryou arenotwithin range ofyour projector, theglasses enter
 standby
modeandthestatus lightflashes green.Slidethepower switch onthe glasses tothe Off
 position
andthen back tothe Onposition toresume 3Dviewing.
 Pairing
the3DGlasses withtheProjector
 Charging
the3DGlasses
 3D
Viewing Range
 Parent
topic:UsingBasicProjector Features
 Related
references
 Input
Signal Settings -Signal Menu
 Pairing
the3DGlasses withtheProjector
 Pair
theglasses withtheprojector toestablish communication betweenthemfor3D viewing.
 1.
Turn onthe projector.
 2.
Settheimage source toHDMI orWirelessHD (PowerLiteHomeCinema 5040UBe) onthe projector.
 3.
Project a3D image.  
						

							

59
4.
Slide thepower switch onthe 3Dglasses tothe Onposition.
 5.
Move theglasses within10feet (3m) ofthe projector andhold down thePairing buttonforatleast
 three
seconds.
 The
status lightonthe glasses flashesgreenandred. Ifpairing issuccessful, thelight turns green
 for
10seconds andthen turns off.
 Parent
topic:Viewing 3DImages
 Charging
the3DGlasses
 When
thestatus lightonthe glasses flashesredtoindicate alow battery, itis time tocharge theglasses.   
						

							

60
1.
Connect thesmaller endofthe charging cabletothe port onthe bridge ofthe glasses.
 Note:
Makesureyouconnect thecable inthe correct orientation oryou may damage theglasses or
 cable.

2.
Doone ofthe following:
 •
Plug theother endofthe charging cableintoapowered USBportonacomputer orother device.
 •
Plug theother endofthe charging cableintoaUSB-to-AC adapterwiththefollowing
 specifications:

Input:
100-240V, ~0.15A,50-60Hz
 Output:
5V=1A
 The
glasses arefully charged whenthestatus lightonthe glasses staysgreen.
 Parent
topic:Viewing 3DImages