Epson Projector PowerLite 4040 User Manual

81
2.
Select theExtended menuandpress Enter.
 3.
Select theDisplay settingandpress Enter.
 4.
Select theColor Uniformity settingandpress Enter.
 5.
Press Enterandselect On.
 6.
Press Esc.
 7.
Select theAdjustment Levelsetting andpress Enter.
 8.
Press theright andleftarrow buttons toadjust thelevel, thenpress Esc.
 9.
Select theStart Adjustments settingandpress Enter. 

82
10.
Select thearea ofthe screen thatyouwant toadjust andpress Enter.
 11.
Select thecolor (Red ,Green ,or Blue )you want toadjust, andusetheleftarrow button toweaken
 the
color toneandtheright arrow button tostrengthen thecolor tone.
 12.
Press Esc.
 13.
Repeat steps10and 11for each areayouwant toadjust.
 14.
When youarefinished, presstheMenu button.
 Parent
topic:Adjusting ProjectorFeatures
 Projector
SecurityFeatures
 You
cansecure yourprojector todeter theftorprevent unintended usebysetting upthe...

83
2.
Select theSettings menuandpress Enter.
 3.
Select theLock Setting settingandpress Enter.
 4.
Select oneofthese locktypes andpress Enter:
 •
To lock thezoom, focus,andlens shiftsettings, selectLensLock.
 •
To lock theprojectors powerbutton, selectChildLock.To turn theprojector on,you must press
 the
power button forlonger thanthree seconds.
 Note:
ChildLockdoesnotprevent theprojector fromturning onwhen thepower cordis
 connected
ifthe Direct Power OnSetting isset toOn .
 •
To lock allbuttons,...

84
Parent
topic:Projector SecurityFeatures
 Unlocking
theProjector s Buttons
 If
the projectors buttonshavebeen locked, holdtheOK button onthe projectors controlpanelforseven
 seconds
tounlock them.
 Parent
topic:Locking theProjector s Lens Settings andButtons
 Related
references
 Projector
FeatureSettings -Settings Menu
 Installing
aSecurity Cable
 You
canusethesecurity slotonthe back ofthe projector toattach aKensington lock.Seeyour local
 computer
orelectronics dealerforpurchase information....

85
You
seethisscreen:
 5.
Select oneofthe following options:
 •
Load Memory :Overwrites yourcurrent settings withsaved settings
 •
Save Memory :Saves yourcurrent settings tomemory (10memories withdifferent namesare
 available)

Note:
Amemory namethathasalready beenusedisindicated byablue mark. Saving overa
 previously
savedmemory overwrites thesettings withyour current settings.
 •
Erase Memory :Erases theselected memorysettings
 •
Rename Memory:Renames asaved memory
 6.
Press Esctoexit.
 Parent...

86
3.
Press theMenu button.
 Note:
Youcanalso press theMemory buttononthe remote controltoaccess theMemory menu
 directly.

4.
Select theSettings menuandpress Enter.
 5.
Select theMemory settingandpress Enter.
 You
seethisscreen:
 6.
Select oneofthe following options:
 •
Load LensPosition :Overwrites yourcurrent focus,zoom, andlens shiftsettings withsaved
 settings

Note:
Youcanload thesaved settings fromMemory1 orMemory2 bypressing theLens1 or
 Lens2
buttons onthe remote control.
 •
Save LensPosition...

87
•
Rename LensPosition :Renames asaved lensposition (12characters maximum)
 7.
Press Esctoexit.
 Parent
topic:Adjusting ProjectorFeatures 

88
Adjusting
theMenu Settings
 Follow
theinstructions inthese sections toaccess theprojector menusystem andchange projector
 settings.

Using
theProjector s Menus
 Image
Quality Settings -Image Menu
 Input
Signal Settings -Signal Menu
 Projector
FeatureSettings -Settings Menu
 Projector
SetupSettings -Extended Menu
 Projector
NetworkSettings-Network Menu
 Projector
Information Display-Info Menu
 Projector
ResetOptions -Reset Menu
 Using
theProjector s Menus
 You
canusetheprojectors menustoadjust...

89
You
seethemenu screen displaying theImage menusettings.
 2.
Press theupordown arrow button tomove through themenus listedonthe left. The settings for
 each
menu aredisplayed onthe right.
 Note:
Theavailable settingsdependonthe current inputsource.
 3.
Tochange settings inthe displayed menu,pressEnter orOK .
 4.
Press theupordown arrow button tomove through thesettings.
 5.
Change thesettings usingthebuttons listedonthe bottom ofthe menu screens.
 6.
Toreturn allthe menu settings totheir default...

90
Note:
Theavailable settingsdependonthe currently selectedinputsource.
 To
change settings foraninput source, makesurethesource isconnected andselect thatsource.
 Setting
 Options
 Description

Color
Mode
 See
thelistofavailable Color
 Modes
 Adjusts
thevividness ofimage
 colors
forvarious imagetypes
 and
environments
 Brightness
 Varying
levelsavailable
 Lightens
ordarkens theoverall
 image

Contrast
 Varying
levelsavailable
 Adjusts
thedifference between
 light
anddark areas ofthe image
 Color...