Epson Projector PowerLite 4040 User Manual

51
Using
BasicProjector Features
 Follow
theinstructions inthese sections touse your projectors basicfeatures.
 Turning
Onthe Projector
 Turning
Offthe Projector
 Viewing
3DImages
 Selecting
theLanguage forthe Projector Menus
 Adjusting
theImage Height
 Adjusting
theImage Position UsingLensShift
 Image
Shape
 Resizing
theImage withtheZoom Feature
 Focusing
theImage withtheLens Button
 Remote
ControlOperation
 Selecting
anImage Source
 Projection
Modes
 Image
Aspect Ratio
 Color
Mode
 Turning
Onthe...

52
2.
Plug thepower cordintoanelectrical outlet.
 Note:
WithDirect Power Onturned on,theprojector turnsonassoon asyou plug itin.
 The
projectors powerlightturns blue.Thisindicates thattheprojector isreceiving power.
 3.
Press thepower button onthe projector orthe Onbutton onthe remote controltoturn onthe
 projector.

The
shutter opensandthestatus lightflashes blueasthe projector warmsup.Once theprojector is
 warmed
up,thestatus lightstops flashing andturns blue.
 Warning:
Neverlookintotheprojector...

53
2.
Press thearrow buttons onthe remote controlorcontrol paneltonavigate thescreen, andpress
 Enter
toselect anoption.
 1
 Select
thevideo source youwant toproject
 2
 Display
theQR code
 3
 Display
theprojector s menus
 4
 Select
customizable menuoptions
 5
 Select
tochange the3Dsettings
 6
 Select
tochange theColor Mode
 Note:
Youcanselect thecustomizable menuoptions usingtheCustom Function 1and Custom
 Function
2settings inthe Extended menu.
 3.
Press theHome button tohide theHome screen.
 Parent...

54
Turning
Offthe Projector
 Before
turning offthe projector, shutdown anycomputer connected toitso you canseethecomputer
 display
duringshutdown.
 Note:
Turnoffthis product whennotinuse toprolong thelifeofthe projector. Lamplifewill vary
 depending
uponmode selected, environmental conditions,andusage. Brightness decreasesovertime.
 Note:
When usingtheBlank feature, theprojector lampisstill on.Toturn offthe lamp, turnoffthe
 projector.

1.
Press thepower button onthe projector orthe Standby buttononthe...

55
3.
Totransport orstore theprojector, makesurethestatus lightisoff, then unplug thepower cord.
 Caution:
Toavoid damaging theprojector orlamp, never unplug thepower cordwhen thestatus
 light
ison orflashing.
 Parent
topic:UsingBasicProjector Features
 Related
tasks
 Shutting
Offthe Picture Temporarily
 Transporting
theProjector
 Viewing
3DImages
 You
canview 3Dimages usingyourprojector. Viewing3Dimages requires a3D-compatible video
 device,
acompatible HDMIcable, andapair ofEpson RF3Dglasses...

56
3.
Begin playback fromthevideo device.
 Note:
Makesureyousetthe video device toplay content in3D mode.
 4.
Slide thepower switch onthe 3Dglasses tothe Onposition.
 5.
Putonthe 3Dglasses. Ifyou donot see a3D image, pairtheglasses withtheprojector.
 Note:
Ifyou change thevideo source oryou arenotwithin range ofyour projector, theglasses enter
 standby
modeandthestatus lightflashes green.Slidethepower switch onthe glasses tothe Off
 position
andthen back tothe Onposition toresume 3Dviewing.
 Pairing...

57
3.
Project a3D image.
 4.
Slide thepower switch onthe 3Dglasses tothe Onposition.
 5.
Move theglasses within10feet (3m) ofthe projector andhold down thePairing buttonforatleast
 three
seconds.
 The
status lightonthe glasses flashesgreenandred. Ifpairing issuccessful, thelight turns green
 for
10seconds andthen turns off.
 Parent
topic:Viewing 3DImages
 Charging
the3DGlasses
 When
thestatus lightonthe glasses flashesredtoindicate alow battery, itis time tocharge theglasses.   

58
1.
Connect thesmaller endofthe charging cabletothe port onthe bridge ofthe glasses.
 Note:
Makesureyouconnect thecable inthe correct orientation oryou may damage theglasses or
 cable.

2.
Doone ofthe following:
 •
Plug theother endofthe charging cableintoapowered USBportonacomputer orother device.
 •
Plug theother endofthe charging cableintoaUSB-to-AC adapterwiththefollowing
 specifications:

Input:
100-240V, ~0.15A,50-60Hz
 Output:
5V=1A
 The
glasses arefully charged whenthestatus lightonthe...

59
3D
Viewing Range
 When
youview 3Dimages, makesureyouarepositioned withintheviewing rangeshown here.
 1
 32
ft(10 m)
 Parent
topic:Viewing 3DImages
 Selecting
theLanguage forthe Projector Menus
 If
you want toview theprojectors menusandmessages inanother language, youcanchange the
 Language
setting.
 1.
Turn onthe projector.
 2.
Press theMenu button.  

60
3.
Select theExtended menuandpress Enter.
 4.
Select theLanguage settingandpress Enter.
 5.
Select thelanguage youwant touse and press Enter.
 6.
Press Menu orEsc toexit themenus.
 Parent
topic:UsingBasicProjector Features
 Adjusting
theImage Height
 If
you areprojecting fromatable orother flatsurface, andtheimage istoo high orlow, youcanadjust
 the
image heightusingtheprojectors adjustablefeet.
 1.
Turn onthe projector anddisplay animage.
 2.
Ifthe image istilted, rotate thefront feettoadjust...