Epson Projector PowerLite 4040 User Manual

61
3.
Toadjust theposition ofthe projected imagefurther, presstheLens button onthe remote controlor
 projector
untilAdjust LensShiftappears onthe screen.
 If
the projected imageisunevenly rectangular, youneed toadjust theimage shape.
 Parent
topic:UsingBasicProjector Features
 Related
concepts
 Image
Shape
 Adjusting
theImage Position UsingLensShift
 If
you cannot installtheprojector directlyinfront ofthe screen, youcanadjust theposition ofthe
 projected
imageusingthelens shiftfeature.
 1.
Turn onthe...

62
4.
Press thearrow buttons onthe remote controlorthe control paneltoadjust theposition ofthe
 projected
imageasnecessary.
 1
 Maximum
horizontal range(H×47%)
 2
 Maximum
verticalrange(V×96%)
 3
 1/2
thevertical heightofthe image
 4
 1/2
thehorizontal widthofthe image
 Note:
Youcannot movetheimage toboth thehorizontal andvertical maximum values.
 5.
When youarefinished, presstheEsc button onthe control panelorremote control.
 Note:
When adjusting theimage height, position theimage lowerthanwhere...

63
Image
Shape
 You
canproject anevenly rectangular imagebyplacing theprojector directlyinfront ofthe center ofthe
 screen
andkeeping itlevel. Ifyou place theprojector atan angle tothe screen, ortilted upordown, oroff
 to
the side, youmay need tocorrect theimage shape forthe best display quality.
 Correcting
ImageShape WiththeKeystone Buttons
 Parent
topic:UsingBasicProjector Features
 Correcting
ImageShape WiththeKeystone Buttons
 You
canusetheprojectors keystonecorrection buttonstocorrect theshape...

64
1.
Turn onthe projector anddisplay animage.
 2.
Press theLens button onthe control panelorremote control.
 3.
Press theLens button repeatedly untilAdjust Zoomisdisplayed onthe screen.
 4.
Press andhold theleftorright arrow button onthe control panelorremote controltoresize the
 image.

5.
Press theEsc button onthe control panelorremote controlwhenfinished.
 Parent
topic:UsingBasicProjector Features
 Focusing
theImage withtheLens Button
 You
canadjust thesharpness ofthe projected imageusingthefocus...

65
Remote
ControlOperation
 The
remote controlletsyou control theprojector fromalmost anywhere inthe room. Youcanpoint itat
 the
screen, orthe front orback ofthe projector.
 Make
surethatyouaimtheremote controlatthe projectors receiverswithinthedistance andangles
 listed
here.
 Vertical

1
 32
feet (10m)
 2
 ±
30 °
 3
 60
°
 4
 10
°  

66
Horizontal

1
 32
feet (10m)
 2
 ±
30 °
 Note:
Avoidusingtheremote controlinconditions withbright fluorescent lightsorindirect sunlight, or
 the
projector maynotrespond tocommands. Ifyou willnot use theremote controlforalong time,
 remove
thebatteries.
 Parent
topic:UsingBasicProjector Features
 Related
tasks
 Using
theHome Screen
 Selecting
anImage Source
 If
you connected multipleimagesources tothe projector, suchasacomputer andDVD player, youmay
 want
toswitch fromoneimage source tothe other....

67
3.
Doone ofthe following:
 •
Press thesource buttononthe projector untilyouseetheimage fromthesource youwant.
 •
Press thebutton forthe source youwant onthe remote control.
 1
 HDMI
portsources
 2
 PC
port (VGA) source
 3
 Network
source   

68
•
Press theHome button onthe remote controlandselect yourimage source.
 Parent
topic:UsingBasicProjector Features
 Projection
Modes
 Depending
onhow youpositioned theprojector, youmay need tochange theprojection modesoyour
 images
projectcorrectly.
 •
Front (default setting)letsyou project fromatable infront ofthe screen.
 •
Front/Ceiling flipstheimage overtop-to-bottom toproject upside-down fromaceiling orwall mount.
 •
Rear flipstheimage horizontally toproject frombehind atranslucent screen.
 •...

69
1.
Turn onthe projector anddisplay animage.
 2.
Press theMenu button.
 3.
Select theExtended menuandpress Enter.
 4.
Select theProjection settingandpress Enter.
 5.
Select aprojection modeandpress Enter.
 6.
Press Menu orEsc toexit themenus.
 Parent
topic:Projection Modes
 Related
concepts
 Projector
Placement
 Image
Aspect Ratio
 The
projector candisplay images indifferent width-to-height ratioscalled aspect ratios.Normally the
 input
signal fromyourvideo source determines theimages...

70
Changing
theImage Aspect Ratio
 You
canchange theaspect ratioofthe displayed imagetoresize it.
 Note:
ForHDMI sources, theinput signal determines theimages aspectratio.
 1.
Turn onthe projector andswitch tothe image source youwant touse.
 2.
Press theAspect buttononthe remote control.
 A
list ofthe available aspectratiosappears.
 3.
Tocycle through theavailable aspectratiosforyour input signal, presstheupordown arrow button.
 4.
Press Entertoselect theaspect ratio.
 Parent
topic:Image Aspect Ratio...