Epson Projector PowerLite 4040 User Manual

71
Aspect
ratiosetting
 Description

Full
 Displays
imagesusingthefullwidth ofthe projection area,butdoes
 not
maintain theaspect ratio.
 Anamorphic
Wide
 (PowerLite
ProCinema 6040UB)
 Displays
imagesthathave a2.40:1 aspect ratiowhen usinga
 commercially
availableanamorphic lens.
 Note:
SettheOverscan settingtoOff orthe image willnot display
 correctly.

Horiz.
Squeeze
 (PowerLite
ProCinema 6040UB)
 Displays
imagesusingthefullwidth ofthe projection areawhen
 using
acommercially availableanamorphic...

72
3.
Press theColor Mode button onthe remote controltochange theColor Mode.
 A
list ofavailable ColorModes appears.
 4.
Tocycle through allthe available ColorModes foryour input signal, presstheupordown arrow
 button.

5.
Press Entertoselect aColor Mode.
 Parent
topic:ColorMode
 Available
ColorModes
 You
cansetthe projector touse these ColorModes, depending onthe input source youareusing:
 2D
Images
 Color
Mode
 Description

Dynamic
 Best
forprojecting inabright room
 Natural
 Best
forprojecting...

73
Turning
OnAuto Iris
 In
certain colormodes, youcanturn onthe Auto Irissetting toautomatically optimizetheimage based on
 the
brightness ofthe content youproject.
 1.
Turn onthe projector andswitch tothe image source youwant touse.
 2.
Press theMenu button.
 3.
Select theImage menuandpress Enter.
 4.
Select theAuto Irissetting andchoose oneofthe following:
 •
High Speed toadjust brightness assoon asthe scene changes.
 •
Normal forstandard brightness adjustment.
 Note:
YoucansetAuto Irisforeach Color...

74
Adjusting
ProjectorFeatures
 Follow
theinstructions inthese sections touse your projectors featureadjustments.
 Shutting
Offthe Picture Temporarily
 Using
Picture inPicture
 Adjusting
theColor Convergence (PanelAlignment)
 Adjusting
theColor Tone(Color Uniformity)
 Projector
SecurityFeatures
 Saving
Settings toMemory andUsing Saved Settings
 Saving
theLens Position andUsing Saved LensPositions
 Shutting
Offthe Picture Temporarily
 You
cantemporarily turnoffthe projected pictureifyou want toredirect...

75
1.
Turn onthe projector andswitch tothe HDMI image source youwant touse.
 2.
Press theP-in-P buttononthe remote control.
 The
second HDMIvideosource appears asasub-screen inthe corner ofthe image.
 Note:
WhilePicture inPicture modeisactive, presstheMenu button onthe remote controltoadjust
 the
size andposition ofthe sub-screen.  

76
3.
Toswap themain screen andsub-screen videosources, pressandhold theP-in-P buttonforat
 least
three seconds.
 4.
Press theP-in-P buttonagaintoclose thesub-screen andresume normalprojection.
 Available
PictureinPicture Options
 Parent
topic:Adjusting ProjectorFeatures
 Available
PictureinPicture Options
 You
canadjust thefollowing optionsbypressing theMenu button onthe remote controlwhilePicture in
 Picture
modeisactive:
 Setting
 Description

Subscreen
Size
 Adjusts
thesize ofthe sub-screen...

77
4.
Select thePanel Alignment settingandpress Enter.
 5.
Select thePanel Alignment settingandpress Enter.
 6.
Select Onand press Enter.
 7.
Select theSelect Colorsetting andchoose oneofthe following:
 •
Rto adjust thered color convergence.
 •
Bto adjust theblue color convergence.
 Note:
Youcanonly adjust thered orblue color convergence. Greenisthe standard colorpanel and
 cannot
beadjusted.
 8.
Select thePattern Colorsetting andpress Enter.
 9.
Select thepattern youwant touse and press Enter.
 10....

78
11.
Press Enter.
 You
seeascreen likethis:
 12.
Use thearrow buttons onthe remote controltoadjust thecolor alignment ofthe color youselected
 for
the Select Colorsetting.
 Note:
Youradjustments affectthegridlines inthe entire screen. Youcanfine-tune youradjustments
 by
continuing withthenext steps.
 13.
When youarefinished adjusting thescreen, pressEnter. 

79
You
seethisscreen:
 14.
Select Adjust thefour corners andpress Enter.
 15.
Use thearrow buttons onthe remote controltoadjust thecolor alignment inthe corner ofthe screen
 highlighted
bythe orange box.
 16.
Press theEnter button tomove tothe next corner ofthe screen.
 17.
When youarefinished adjusting eachcorner ofthe screen, pressEnter. 

80
You
seethisscreen:
 18.
Doone ofthe following:
 •
Ifyour projectors panelalignment isnow correct, selectExitandpress Enter toreturn tothe
 Panel
Alignment menu.
 •
Ifyour projector needsadditional panelalignment, selectSelect intersection andadjust and
 press
Enter.Use thearrow keysonthe remote controltohighlight thecorner ofany boxonthe
 screen
thatismisaligned andpress Enter toadjust thecolor convergence. Repeatthisstep as
 necessary.

Parent
topic:Adjusting ProjectorFeatures
 Adjusting
theColor...