Epson Projector Moviemate 25 User Manual

41
Advanced Operations
The default audio setting plays DVDs at a higher volume than other discs. You 
can adjust this default setting if necessary.
Press   during playback.
Each time you press  , the display window changes as follows. As 
you listen to the audio being played, press repeatedly until the setting you 
want is displayed.
•The setting is only effective when  is played. It does not affect 
the output level from the Optical Audio-Out port.
•This operation can also be performed when the video is...

42
You can adjust the audio input level of equipment connected to the Audio port.
1 Press   and switch to the external video mode.
2Press and hold   for approximately 2 seconds.
Each time you press and hold  , the display window changes as 
follows.
Adjusting the audio input level of external audio equipment
Make sure the switch is set to the 
[Function] position.
For normal use (default setting)
Use this setting when the input level from external 
equipment is too low and the audio is difficult to hear. 

43
Fine-Tuning Your 
MovieMate
You can adjust the MovieMate settings to suit your viewing environment.
The Settings menu allows you to change the language, audio and video 
options, and more. This section describes how to use the menu.
1When a video is stopped, or when there is no disc loaded in 
the disc tray, press  .
The following settings menu is displayed.
2Press   to move the pointer to the icons at the top right 
and select the menu group.
3Press   to select the item to be set.
4Press   to display...

44
5Press   to select the item, then press  .
Boldface indicates the default.
Language settings menu
Video settings menu
To return to the previous menu level, press  .
ItemSettings
Menu Language
Select the language for the DVD video menu.For “AA” and other language codes, see the “Language Code List” 
on page 46.
These settings become available when settings have been recorded 
on the disc itself. When settings have not been recorded, the setting 
contents become available. If the selected language has...

45
Audio settings menu
Other settings menu
ItemSettings
Digital Audio Output
Select the output signal according to the 
equipment connected to the Optical Audio-
Out port.
For detailed signal information, see page 46.PCM only: Use when connected to equipment that is only 
compliant with Linear PCM (Pulse Coded 
Modulation).
DOLBY DIGITAL/PCM: Use when connected to a Dolby Digital 
Decoder or when connected to equipment with this 
function.
Stream/PCM: Use when connected to a DTS/Dolby Digital 
Decoder,...

46
CodeLanguageCodeLanguageCodeLanguageCodeLanguage
AA Afar GD Scots Gaelic MK Macedonian SN Shona
AB Abkhazian GL Galician ML Malayalam SO Somali
AF Afrikaans GN Guarani MN Mongolian SQ Albanian
AM Ameharic GU Gujarati MO Moldavian SR Serbian
AR Arabic HA Hausa MR Marathi SS Siswati
AS Assamese HI Hindi MS Malay (MAY) ST Sesotho
AY Aymara HR Croatian MT Maltese SU Sundanese
AZ Azerbaijani HU Hungarian MY Burmese SV Swedish
BA Bashkir HY Armenian NA Nauru SW Swahili
BE Byelorussian IA Interlingua NE...

47
AD Andorra ET Ethiopia LC Saint Lucia SD Sudan
AE United Arab Emirates FI Finland LI Liechtenstein SE Sweden
AF Afghanistan FJ Fiji LK Sri Lanka SG Singapore
AG Antigua and Barbuda
FKFalkland Islands
(Malvinas)LR Liberia SH Saint Helena
AI Anguilla LS Lesotho SI Slovenia
AL Albania
FMMicronesia
(Federated States of)LT Lithuania SJ Svalbard and Jan Mayen
AM Armenia LU Luxembourg SK Slovakia
AN Netherlands Antilles FO Faroe Islands LV Latvia SL Sierra Leone
AO Angola FR France LY Libyan Arab Jamahiriya...

48
You can adjust the brightness, contrast, and other values of the projected image.
1Press   during projection.
The following menu is displayed.
2 Press   repeatedly until the item that you want to 
change is displayed. 
The menu item changes as follows whenever   is pressed.
Brightness → Contrast → Color Saturation → Tint → Sharpness → Key-
stone → Exit Picture Quality menu
3Press   to make your adjustments.
4Press . 
The adjustment closes and the Picture Quality menu disappears. 
Picture Quality Menu...

49
Setting ItemSetting Contents
BrightnessAdjusts the image brightness.
ContrastAdjusts the difference between light and shadow in the image.
Color SaturationAdjusts the color saturation for the image.
TintOnly displayed when an NTSC signal is being input.
Adjusts the image tint.
SharpnessAdjusts the image sharpness.
KeystoneIf the screen is not positioned vertically, the projected image is distorted in the shape of a 
keystone. You can correct keystone distortion as follows:
Picture Quality menu settings 

50
You can view status information and select “Video Signal,” “High Altitude Mode,” and “Lamp-Hours Reset.”
1Press   during projection.
The following Information is displayed.
2Press   repeatedly until the item that you want to confirm 
or change is displayed. The menu item changes as follows 
whenever  is pressed:
Information → Video Signal → High Altitude Mode → Lamp-Hours 
Reset → Exit video Information menu
3Press   to make your adjustments.
4Press .
The adjustment closes and the video Information...