Epson Projector Moviemate 25 User Manual

21
Advanced Operations
1When playing a disc that contains both MP3/WMA files and 
JPEG files, you see the following kind of group/track (file) 
name list.
2Press   to select the group.
3Press   to move the pointer to the track (file) name list. 
Press   to return the pointer to the group name list.
4Press   to select the track.
You can also make the same selection using  .
5Press   or   to begin playback.
When you press   for a  , continuous playback begins from 
the selected file (slideshow playback)....

22
To repeat playback
1Press   during playback or when stopped. 
Each time you press  , the repeat mode changes as shown in the fol-
lowing table.
2Press .
To play MP3/WMA audio (Image Off)
Once menu selection is complete and the audio begins, press  . MovieMate 
beeps and the projection lamp turns off so you can enjoy just the music being 
played.
Press   to turn the lamp back on. Once the lamp has been turned off and when 
the Image Off indicator is flashing orange, the lamp does not come back on even...

23
Advanced Operations
Specifications of files that can be played
To play a CD-R or CD-RW containing MP3/WMA or JPEG files with this 
unit, the contents of the disc must conform to the following standards.
MP3/WMA
File system: ISO9660 level 1 or level 2
Discs that have been recorded in the packet write (UDF) format cannot be 
read.
Bitrate: MP3: 32 kbps~320 kbps
WMA: 64 kbps - 160 kbps
Sampling frequency: 16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz
Filename: Half-width English characters only....

24
During playback, select the chapter or track number you wish to 
play by pressing the numeric buttons.
For details on using the numeric buttons, see page 19.
You can play a disc from a specified time position. Depending on the disc, the 
start point position varies as follows.
 Time elapsed from the start of the title
 When executing from stopped: Time elapsed from 
the start of the disc
When executing during playback: Elapsed time from the start of the current 
track being played
1Press   twice...

25
Advanced Operations
5Press .
6Press   once to cancel the menu bar.
Entering the time
To play a disc from 0 hours, 23 minutes, and 45 seconds, for example,
Set the Function/Numerics toggle switch to the [123] position.
Press the numeric buttons in the order of   →  →  → 
 → .
If you make a mistake, press   and delete the incorrect number, then re-
enter the correct number.
Once you have finished entering the time, return the function/numerics 
toggle switch back to the [Function] position.
•If the...

26
You can set the playback range (start point to end point) from the menu bar dur-
ing playback.
1Press  twice during playback. 
The following menu bar is projected.
• Where possible, this function can be used during playback.
• Cannot be used when playing back using the PBC 
function.
2Press   until the pointer reaches  .
3Press .
4Press   then select  .
You can also select other repeat modes from here. See page 27
5When you reach the scene or track where you want to start, 
press .
The menu bar icon...

27
Advanced Operations
Depending on the type of disc, you can loop playback within a range of titles, 
chapters, or tracks, as in the following table.
Press  during playback.
The repeat mode changes whenever you press  . The repeat mode 
name and icon are displayed on the projected screen and in the display 
window.
• Where possible, this function can be used during playback.
• Cannot be used when playing back using the PBC 
function.
•You cannot specify a range which includes multiple titles or tracks....

28
Repeat modes available during program play 
and random play
Canceling repeat play
•Press   repeatedly until “ ” is displayed on the screen.
•Turn off the power switch on the main unit.
• You cannot use the “Title repeat” function with some DVDs.
•
 To cancel repeat, press .
•Display the menu bar and move the pointer to   to select repeat 
play. For details, see page 33.
Repeat modeScreen displayDisplay window 
display
Repeats the chapter/track designated when repeat 
play was selected
Repeats all...

29
Advanced Operations
You can set titles, chapters, and tracks to play in the order of your preference.
1Press   when stopped.
Each time you press  , the display window on the main unit changes 
as follows. Press repeatedly until “PRGM” is displayed. 
2Set the order according to the following screen explanations.
See “Using the numeric buttons” on page 19.
3Press .
•Playback begins according to the order you set.
•Once the set playback is complete, playback ends and “Program” is 
displayed. 
Canceling...

30
You can choose to play titles or chapters/tracks at random.
The playback order always changes when using random play.
1Press  when stopped.
Whenever you press   the display window changes in the following 
way. Keep pressing until “RANDOM” is displayed.
  
2Press .
Once one title or track has finished, another title or track is played ran-
domly.
Resuming normal playback
When stopped, press   repeatedly until the display window returns to its nor-
mal display state.
•Random play is cancelled if the...