Epson Projector Moviemate 25 User Manual

31
Advanced Operations
When a disc has been recorded with multiple audio signals or languages, you 
can switch to the audio signal or language of your preference.
1Press   during playback.
The current audio settings are displayed.
2While the audio settings are displayed, press   repeat-
edly and select the desired setting.
Press   to change the setting.
3Wait a few seconds, or press  .
•You can also use the menu bar to change the setting. See page 33.
•If a language code (AA, etc.) is displayed, see page...

32
You can choose whether or not to display subtitles for discs that have been 
recorded with subtitles. When a disc has been recorded with multiple language 
subtitles, you can switch to the available language of your preference.
1Press  during playback.
The current subtitle settings are displayed.
2While the subtitle settings are displayed, press   
repeatedly to select subtitles on or subtitles off. Press 
 to select the subtitle language.
 If you press   repeatedly, you can select the subtitle type...

33
Advanced Operations
1Press   twice during playback.
The following status bar and menu bar are projected.
2Press   until the pointer reaches the item you wish to 
use.
3Press .
•Press   once to cancel the menu bar.
•When playback is stopped, some functions may not work.
•The status bar is not displayed when playing back cinemascope (letter-
box)  . Although functions can be set in this state, when it is 
necessary to display the status bar, press   to return the aspect ratio 
to normal. Press   to...

34
Auto standby: When playback has finished or has been stopped, or an opera-
tion has not been performed for about 3 minutes, the power switches off auto-
matically.
Sleep timer: Once the set time has elapsed, the power switches off automati-
cally. This prevents unneccesary power being consumed if you fall asleep 
while watching a movie.
You cannot use auto standby and sleep timer at the same time.
Press .
•Each time you press  , the display window changes as follows. 
Press repeatedly until the...

35
Advanced Operations
For the best image quality, MovieMate uses the Progressive video display 
mode. You can change to the Interlaced mode if necessary.
When there is no disc loaded in the disc tray (or when a video is 
stopped), press  .
Whenever you press   the display window display changes in the fol-
lowing way. 
You can lock the disc tray so that children cannot interfere with it. 
With the power turned on press and hold   on the MovieMate 
control panel, then press  .
•“LOCKED” appears in the...

36
You can connect your MovieMate to devices that have 
a video output port, such as:
- VCRs  - Game consoles
- Video cameras
If the video equipment you are connecting supports 
both S-Video and composite video formats, you can 
enjoy higher quality images by using the S-Video 
connection.
The composite video format is also called “Video Out.”
 Using the composite video connection 
Using External Video Equipment
Connecting to other video equipment
Connection cables may be included with your 
video...

37
Advanced Operations
Using the S-Video connection
1Remove the lens cover if it is in place.
2Turn on the MovieMate power switch, then press  .
3Press .
“VIDEO” appears in the display window and MovieMate switches to 
external video mode. 
4Switch on the power to the connected video equipment, then 
start playback. 
If the lamp was off, it comes on.
After a moment, the video is projected.
Functions available in external video mode
The following functions are available when you are using external video...

38
Connect your headphones as shown below.
Using External Audio Equipment
•When listening with headphones, make sure the volume is not too high. You can damage your hearing when listen-
ing to sounds at high volume over an extended period of time.
•Don’t set the volume too high from the outset.  A sudden loud sound may cause damage to your headphones or 
your hearing. As a precaution, lower the volume before you switch the power off then raise it gradually after you 
switch it back on.
Once you have...

39
Advanced Operations
You can connect to AV amplifiers and equipment capable of making digital recordings when they are equipped with a 
digital audio input port. You will need an optical digital audio cable, which may be included with your equipment or can 
be purchased from an electronics dealer.
You can enjoy more powerful bass by connecting to the optional subwoofer. 
For connection and usage instructions, refer to the User’s Guide provided with the subwoofer. 
•You can change the signal being...

40
You can obtain enhanced audio from the speakers by activating the JVC origi-
nal sound system function. 
Press .
Each time you press  , the display window display changes as fol-
lows. Press   repeatedly until the desired mode is displayed.
This feature, which adjusts the volume of high-pitched tones, is available only 
when audio is being input from external video equipment.
Selecting the Sound Mode
Make sure the switch is set to the 
[Function] position.
Select the mode that produces the best sound...