Epson Projector Emp 8150nl User Manual

 Connecting the projector to a computer - 29
In the case of the mini D-Sub 15 pin
·Connect the computer’s monitor port to the Computer #1 mini D-Sub 15 Port on the projector 
with the computer cable supplied.
·Set the switch to the analog setting (right-hand side) with the tip of a ballpoint pen or other 
pointed object.
 When the monitor port is the D-Sub 15 pin
 When the monitor port is the 5BNC
Caution
·Switch off the power supply to the projector and computer before attempting to make the...

30 - Connecting the projector to a computer
Point
·Do not bind the Power Cable and the Computer Cable together. Failure to observe this 
may result in malfunctions.
·An adapter may be required when making the connection depending on the stand of the 
computer’s port. Refer to the computer instruction manual for further details.
·There are cases where the optional (ELPAP01) Mac Desktop Adapter and Mac Monitor 
Adapter are required when connecting up to a Macintosh.
·It is possible to establish connections...

 Connecting the projector to a computer - 31
In the case of 5BNC
(When connected to the second computer)
Connects the computer monitor port to the projector’s Computer 2/Component Video-BNC 
Port with the computer cable supplied.
Point
·Set the BNC parameter to [RGB] when establishing the connection. (see page 70)
·Make the connection with the 5BNC  5BNC cable (optional:ELPKC13) when the com-
puter monitor port is 5BNC.
·Connections can be made to both computer #1 port and computer #2 port when two com-...

32 - Connecting the projector to a computer
In the case of DVI-D*
Digital signals are output to the projector without amendment if a digital video card for liquid 
crystal displays and output port are mounted onto the computer.
·Connect the computers digital output port to the projectors computer #1 DVI-D port with 
the optional digital video cable (ELPKC20/21). Select the cable in accordance with the shape 
of the computer port (DVI-D/DFP).
·Set the switch to the digital setting (left-hand side) with...

 Connecting the projector to a computer - 33
Sound connection
The projector is equipped with two built-in speakers capable of outputing a maximum of 3W, 
and it is also possible to output computer sound from the projector’s speakers.
 Connecting the computer to Computer #1
Connect the projector’s Audio Port (stereo mini jack) to the computer’s audio output port with 
the Audio Cable supplied.
 Connecting the computer to Computer #2
Connect the computers audio output port to the projectors S-Audio/Audio...

34 - Connecting the projector to a computer
Connecting external monitors
It is possible to display the image projected with the projector onto a computer simultaneously. 
Connect the projectors monitor out port to the computer monitor with the cable attached to the 
monitor.
Point
·There are cases where the optional (ELPAP01) Mac Desktop Adapter and Mac Monitor 
Adapter are required when connecting up to a Macintosh.
·Images cannot be displayed on external monitors when the computer is connected to the...

 Connecting the projector to a computer - 35
Connecting up the mouse (wireless mouse function)
This enables the computer’s mouse pointer to be operated with the remote control in the same 
way as a wireless mouse.
Connect the projector’s Mouse/Com Port to the computer’s mouse port with the mouse cable 
and Main Cable.
Refer to the above table before making your selection.
Point
·Only the USB standard mounted model supports USB Mouse Cable connections. In the 
case of Windows, only the Windows 98/2000...

36 - Connecting the projector to a computer
Perform the following mouse operations after the connection has been established:
Left click  - - - - - - - - - - - - - - - - - Press the [Enter] button.
Right click  - - - - - - - - - - - - - - - - Press the [Esc] button.
Mouse pointer movement - - - - - Lowers the remote control [Enter] button
Point
·The operations will be reversed if the left/right button functions of the mouse pointer have 
been amended with the computer.
·The mouse cannot be used when the...

 Connecting the video equipment - 37




 
Connecting the video equipment
Switch off the power supply to the projector and video equipment prior to attempting to 
make the connection.
Point
The audio signals output the selected image’s sound.
In the case of composite image signals
·Connect the projector’s Video Port to the video equipment with the supplied RCA Video 
Cable (Yellow).
·Connect the L-Audio-R ports with the RCA audio cable supplied (red/white) to output 
sound from the projectors speakers....

38 - Connecting the video equipment
In the case of component (color differential*) image signals
·Connect the projector’s Computer 2/Component Video-BNC Port to the video equipment 
with the component video cable (available on the open market) so that the following table is 
supported.
·Connect the S-Audio/Audio #2 ports with the RCA audio cable supplied (red/white) to out-
put sound from the projectors speakers.
Point
·A conversion connector (available on the open market) is required on the projectors...