Epson Projector Emp 8150nl User Manual

 Safety Precautions - 9
Never look into the lens when the power is switched on.
An extremely strong light is emitted that may cause sight defects. 
Special attention must be paid by households with children.
Take care when handling power plugs and power connectors.
Failure to observe these instructions may result in the outbreak of fire 
or electric shocks.
Observe the following precautions when handling power plugs and 
power connectors.
·Never connect too many appliances to a single socket.
·Never...

10 - Safety Precautions
Caution
Never stand on the projector or place any heavy objects on it.
Failure to observe this may result in it dropping over, becoming dam-
aged, or causing injury.
Never place the projector on unstable surfaces, such as wobbly 
tables or slanted surfaces.
Failure to observe this may result in it dropping over, becoming dam-
aged, or causing injury.
Do not place or store the projector within the reach of children’s 
hands. 
Failure to observe this may result in it dropping...

 Safety Precautions - 11
Always ensure that the power has been switched off, the plug 
has been disconnected from the power socket, and all other 
cables have been disconnected when moving the projector.
Failure to observe this may result in the outbreak of fire or electric 
shocks.
Never attempt to remove the lamp immediately after the projec-
tor has been used. Wait for the projector to cool down suffi-
ciently by leaving it for at least sixty minutes after the power 
supply has been switched off...

12 - Safety Precautions
Safety Precautions
Using the projector outside of the permissible temperature range (+5C° to 40C°) 
may result in unstable display and excessive loads being placed on the fan, lead-
ing to damage to the equipment.
Storing the projector outside of the permissible temperature range (-10C° to 
60C°) may result in damage of the case. Take special care to avoid placing the 
equipment in direct sunlight for a long period of time.
Do not use the projector with the lens cover still in...

 Parts, Names and Operations - 13
Before using this equipment
This section provides explanations on parts and part names, and the items that should be verified before operating the remote control.




 
Parts, Names and Operations
Projector
 Front Panel
 1 Operation Indicator
 2 Lamp Indicator
 3 Temperature Indicator
 4 Handle
 5 Lens Shift Knob
 6 Foot Adjust Lever
 7 Operation Panel
 8 Speaker
 9 Remote Control Receiver
10 Theft-Protection Lock (see page 102
)
11 Focus Ring
12 Zoom Ring
13 Lens...

14 - Parts, Names and Operations Back Panel
1 Remote Control Receiver
2 Fan
3 Power Inlet
4 I/O Port
5 EasyMP.net Board
 Rear Panel
 1 Front Foot
 2 Rear Foot
 3 Air Filter (suction inlet)
1
2
34
5
12
3 

 Parts, Names and Operations - 15
 Operation Panel
 1 [Help] button (see page 53)
Displays the methods of solving problems. Press this button when trouble occurs.
 2 [Video] button (see page 43)
Switches the images between video images (Video), S video (S-Video) and component 
video (BNC (YCbCr)).
 3 [Menu] button (see page 66)
Displays and cancels the menu.
 4 [Power] button (see page 42, 45 )
Switches the power supply on and off.
 5 [Comp/EasyMP.net] button (see page 43)
Switches the Computer #1...

16 - Parts, Names and Operations I/O Ports
 1 Computer 1 mini D-Sub 15 Port
Inputs the computer’s analog image signals.
 2 Change-over Switch
Switches the valid port for Computer #1 across to either mini D-Sub15 (analog) or DVI-D 
(digital). Operate the switch with the tip of a ballpoint pen or other pointed object.
 3 Computer 1 DVI-D Port
Inputs the computer’s digital image signals.
 4 Computer 2/Component Video-BNC Port
· R/Cr/Pr  · G/Y  · B/Cb/Pb · H/C Sync  · V Sync
Inputs the computer’s BNC image...

 Parts, Names and Operations - 17
 EasyMP.net board
1. Network Connector
Connects the projector to a network.
2. PCMCIA Card Slot
For the insertion of memory cards.
3. USB Port
Used for connecting the USB mouse, USB keyboards and USB tablets, etc.
Point
Refer to the “EasyMP.net User’s Guide” for details on the EasyMP.net functions.
LAN Card Slot USB
12 3 

18 - Parts, Names and Operations
Remote Control
 Front Panel
 1 Remote control light-receiving area
Outputs the remote control unit’s signals.
 2 Indicator
Illuminated when the remote control unit signals are being output.
Light will not be emitted when the batteries are getting low or when the [R/C ON OFF] 
switch is set at [OFF].
 3 [Freeze] button (see page 55)
Temporarily freezes the image. Press this button once more to cancel the freeze mode.
 4 [A/V Mute] button (see page 55)
Temporarily mutes...